Uni-Solar PVL-128 Carton 30 UL LISTED 128W 24V Solar Panels - 3840W - 4" Wires
- Calculated at Checkout
Uni-Solar PVL-128B 3840 Watt Carton of 30 128 Watt Solar Panels with Bottom Facing 4" Wires
Category 3 (130 MPH) Hurricane uplift resistant when installed in accordance with manufacturer's guidelines.
These cartons can be stacked and shipped three high for reduced shipping costs on multiple carton orders.
Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. Each cell is connected to each other via bypass diodes. Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost - usually less than 4.5%.These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications.
Previous customers have reported installing these panels on their corrugated metal roofs by attaching 18" x 2" metal strips every few feet on the sticky backing, leaving the white covering for the sticky backing intact where the metal strips are not present (saving the sticky material for other projects in case the panel is moved later). They then drove self-tapping screws through the protruding ends of the metal strips onto their metal roof, sealed with a proper caulk. This allowed them to install the panel with its built-in sticky backing and yet keep the installation non-permanent.
Condition: Open Box
This carton of 30 solar panels is New Open Box. The panel has bottom facing 4-inch wires for connections below the panel. We include a DIY Junction Box with 18-Inch MC3 Connectors with every panel sold, but other components may be needed depending on the desired setup, such as additional short wires to connect the 4-inch wires to the j-box, and/or a sealant to connect the j-box securely to the panel. It is 18 feet long by 15.5 inches wide. This listing will ship via a Freight Service. Please view our photo set and contact us if you have any questions.