Electronic Test
Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.
-
Ametek Pittman GM9236S014 DC Gearmotor 12V 24VDC 5.9:1 Ratio Brushed
Ametek
$100.00Was: $250.00Ametek Pittman GM9236S014 DC Gearmotor 12V 24VDC 5.9:1 Ratio BrushedThe Ametek Pittman GM9236S014 is a brushed DC gearmotor designed for 12V to 24VDC operation. It features a 5.9:1 gear ratio that...53361- SKU:
- 53361
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Ametek Pittman
- Model:
- GM9236S014
- MPN:
- GM9236S014
- SKU:
- 53361
- Condition:
- Used – Pulled from Working Environment
- Motor Type:
- Brushed DC Gearmotor
- Voltage Rating:
- 12V to 24VDC
- Gear Ratio:
- 5.9:1
- Form Factor:
- Compact Brushed Motor
- Applications:
- Robotics, Conveyors, Medical Equipment, Industrial Automation
- Seller Notes:
- Unit pulled from working environment. Verify mounting and shaft requirements before installation.
- Condition Notes:
- This Ametek Pittman GM9236S014 DC gearmotor was pulled from a working environment and has not been powered up or tested at our facility. It shows minor cosmetic wear consistent with previous use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$100.00Was: $250.00 -
National Instruments PCI-6034E DAQ Card 200 kS/s 16-Bit 16-Ch 68-Pin NI-DAQ
National Instruments
$125.00National Instruments PCI-6034E DAQ Card 200 kS/s 16-Bit 16-Ch 68-Pin NI-DAQ Multifunction data acquisition card for PCI desktop systems. Captures analog signals with 16 simultaneous input channels at...53360- SKU:
- 53360
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 0.74 LBS
- Brand:
- National Instruments
- Model:
- PCI-6034E
- Secondary Model:
- 6034E
- MPN:
- 187576G-01
- Secondary MPN:
- 780888-01
- SKU:
- 53360
- Condition:
- Used
- Seller Notes:
- Card only; no software or accessories confirmed included.
- Form Factor:
- PCI Card
- Interface:
- Standard PCI
- Analog Inputs:
- 16
- Resolution:
- 16-Bit
- Sample Rate:
- 200 kS/s
- Connector Type:
- 68-Pin SCSI-Style
- EMI Shielding:
- Metal EMI Shield Included
- Compatible With:
- NI-DAQ, LabVIEW, standard PCI desktop systems
- Country of Manufacture:
- Hungary
- Product Type:
- Multifunction Data Acquisition Card
- Condition Notes:
- This National Instruments PCI-6034E DAQ Card shows light dust on the PCB and minor surface oxidation on the metal mounting bracket, consistent with prior installation in a computer system.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$125.00 -
Takasago BWS 40-15 Bipolar Power Supply Amp 40V 15A CV CC Rackmount
Takasago
$4,000.00Was: $15,000.00Takasago BWS 40-15 Bipolar Power Supply Amp 40V 15A CV CC Rackmount Four-quadrant bipolar power supply and amplifier with ±40V and ±15A output capability. Operates in constant voltage (CV) and...53356- SKU:
- 53356
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 115.00 LBS
- Brand:
- Takasago
- Model:
- BWS 40-15
- MPN:
- BWS 40-15
- SKU:
- 53356
- Condition:
- Open Box – Minimal Use
- Seller Notes:
- Open Box; removed from a solar flash tester never put into production
- Form Factor:
- Rackmount
- Country of Manufacture:
- Japan
- Voltage Rating:
- ±40V
- Current Rating:
- ±15A
- Output Modes:
- Constant Voltage (CV), Constant Current (CC)
- Operation Type:
- Four-Quadrant Bipolar
- Power Requirements:
- 100V AC, 50/60Hz (visible on rear panel label)
- Meter Type:
- Dual Yokogawa analog panel meters (Voltage & Current)
- Output Terminals:
- GND, LOW, HIGH binding posts (front panel)
- Rear Connections:
- Terminal block: OUTPUT SENSE HIGH/LOW, AC INPUT VOLTAGE
- Control Interface:
- Front panel: DC Reference dial, Gain, Input BNC, Mode/Offset/Operation switches
- Rear Aux Interface:
- Terminal block: EXT POT, EXT REF COM, OUT CURR MONI, OUT ON/OFF
- Application / Use Case:
- Precision lab power, solar flash testing, magnetic field gen
- Type:
- Bipolar Power Supply and Amplifier
- Condition Notes:
- Open box, minimal use. Removed from solar flash tester prototype. Some storage dust but no damage. Bench tested, working condition.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$4,000.00Was: $15,000.00 -
LEMO ERA.3Y.415.CA High Voltage Push-Pull Connector ERA.3Y.260.CZZ Microswitch
LEMO
$150.00Was: $300.00LEMO ERA.3Y.415.CA High Voltage Push-Pull Connector ERA.3Y.260.CZZ Microswitch LEMO ERA Series high voltage push-pull circular connector assembly with integrated microswitch. Panel-mounted connector...53355- SKU:
- 53355
- Availability:
- In stock and ready to ship within 1-2 business days.
- Weight:
- 5.00 LBS
- Brand:
- LEMO
- Model:
- ERA.3Y.415.CA
- Secondary Model:
- ERA.3Y.260.CZZ
- MPN:
- ERA.3Y.415.CA
- SKU:
- 53355
- Seller Notes:
- Complete assembly with connector, cable, and integrated microswitch
- Connector Series:
- ERA Series (Push-Pull Circular)
- Connector Type:
- Push-Pull Circular Connector
- Voltage Rating:
- High Voltage
- Shell Size:
- 3Y
- Mounting Style:
- Panel Mount
- Included Accessories:
- Connector body, white multi-conductor cable, microswitch, yellow lead
- Country of Manufacture:
- Switzerland
- Form Factor:
- Panel Mount Assembly with Threaded Shaft
- Condition Notes:
- New/unused LEMO ERA.3Y.415.CA connector assembly with ERA.3Y.260.CZZ microswitch. Removed from unused equipment. All components intact, no wear. Original packaging may be opened or missing.
- Compatible With:
- Scientific instrumentation, medical devices, industrial control
- Type:
- High Voltage Push-Pull Circular Connector
- Interface:
- Hexagonal Locking Nut
- Included Components:
- Connector body, cable, microswitch, yellow lead wire
- Country/Region of Manufacture:
- Switzerland
- Interface Type:
- Hexagonal Locking Nut
- Cable Included:
- White Multi-Conductor Cable
- Microswitch Model:
- ERA.3Y.260.CZZ
- Microswitch Lead:
- Yellow Wire
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Omron S8VM-30024C Industrial Switching Power Supply 24V 14A 300W 100-240V
Omron
$150.00Was: $600.00Omron S8VM-30024C Industrial Switching Power Supply 24V 14A 300W 100-240V DIN rail-mounted switching power supply that converts 100-240V AC input to regulated 24V DC output at 14A. Designed for...53354- SKU:
- 53354
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Omron
- Model:
- S8VM-30024C
- MPN:
- S8VM-30024C
- SKU:
- 53354
- Condition:
- Used – Inspected
- Seller Notes:
- Pulled from an unused solar flash tester; unit is in like-new condition.
- Form Factor:
- DIN Rail Mount
- Country of Manufacture:
- China
- Power Requirements:
- AC 100-240V, 50/60Hz, 4.3A
- Voltage Rating:
- Input: 100-240V AC; Output: 24V DC
- Current Rating:
- Output: 14A
- Power Rating:
- 300W
- Output Voltage:
- 24V DC
- Output Current:
- 14A
- Input Voltage:
- 100-240V AC, 50/60Hz
- Input Current:
- 4.3A
- Phase:
- Single Phase
- Frequency:
- 50/60Hz
- Certifications:
- UL Listed (E171M), CE
- Hazardous Location Rating:
- Class I Div 2, Groups A B C D, Temp Code T4
- Compatible With:
- DIN rail control panels, PLCs, automation systems
- Product Series:
- S8VM Series
- Condition Notes:
- New/unused Omron S8VM-30024C 24V 300W power supply pulled from unused equipment. No wear. Packaging may be opened. Not tested. See photos.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $600.00 -
Glassman High Voltage PS/MK03P25.0L20 MK Series HVDC Power Supply 3kV 25mA
Glassman High Voltage, Inc.
$600.00Was: $1,500.00Glassman High Voltage PS/MK03P25.0L20 MK Series HVDC Power Supply 3kV 25mA Benchtop high-voltage DC power supply capable of adjustable output from 0 to +3kV at 25mA. Single-phase AC input with local...53349- SKU:
- 53349
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 15.00 LBS
- Brand:
- Glassman High Voltage, Inc.
- Model:
- PS/MK03P25.0L20
- MPN:
- PS/MK03P25.0L20
- SKU:
- 53349
- Series:
- MK Series
- Seller Notes:
- Unit only; no accessories included. Power indicator light illuminates.
- Form Factor:
- Benchtop / Panel-Mount Module
- Country of Manufacture:
- United States
- Power Requirements:
- 200V, 48-420Hz, Single Phase, 180VA Max
- Output Voltage:
- 0 to +3kV DC Adjustable
- Output Current:
- 25mA
- Power Rating:
- 75W
- Voltage Rating:
- 3kVDC Output
- Input Frequency:
- 48-420Hz
- Phase:
- Single Phase
- Supply Type:
- AC-HVDC High Voltage Power Supply
- Insulation Type:
- Air-Insulated
- Output Connector:
- HV Output: E1, GND, J3 terminals
- Control Interface:
- DB25 connector (J1 pins 1-13, 14-25); Local Control switch
- Certifications:
- CE
- Application:
- Ion beam, capacitor charging, high-voltage bias, OEM integration
- Condition Notes:
- New/open box, unused. Packaging opened or missing. Excellent cosmetic condition, no wear. Power indicator illuminates when plugged in.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$600.00Was: $1,500.00 -
Glassman PS/PK003R1.3 High Voltage DC Power Supply 3kV 1300mA 208V 3-Phase
Glassman High Voltage, Inc.
$5,940.00Was: $15,000.00Glassman PS/PK003R1.3 High Voltage DC Power Supply 3kV 1300mA 208V 3-Phase The Glassman PS/PK003R1.3 is a regulated high voltage DC power supply designed for laboratory and industrial applications...53346- SKU:
- 53346
- Availability:
- Ships within 1-2 business days. Contact us with any pre-purchase questions.
- Weight:
- 38.00 LBS
- Brand:
- Glassman High Voltage, Inc.
- Model:
- PS/PK003R1.3
- MPN:
- PS/PK003R1.3
- SKU:
- 53346
- Seller Notes:
- Sold AS-IS for parts or repair; not bench-tested
- Form Factor:
- Rackmount / Benchtop
- Country of Manufacture:
- USA
- Power Requirements:
- 208V AC, 48-63Hz, 3-Phase, 7000VA Max
- Output Voltage:
- +/- 3000V DC (Bipolar)
- Output Current:
- 1300 mA
- Output Type:
- Bipolar (Positive/Negative Selectable)
- Phase:
- Three Phase
- Input Frequency:
- 48-63 Hz
- Fuse Rating:
- 3x 20A, 250V, Type F
- HV Output Connector:
- JHV1 (SHV-style coaxial, rear panel)
- Control Interface:
- Front panel analog + remote DB-25 programming
- Remote Programming:
- DB-25 connectors (J1/J2) for voltage, current, enable
- Front Panel Meters:
- Digital milliamperes display, digital kilovolts display
- Controls:
- Current control knob, voltage control knob, polarity select
- Interlock:
- External interlock input present
- Application:
- Coating, charging, beam control, high-voltage lab/industrial
- Manufacturer Location:
- High Bridge, NJ 08829
- Condition Notes:
- New, unused. Never powered on. Original packaging may be opened/incomplete. No visible damage. See photos for condition.
- Type:
- High Voltage DC Power Supply
- Country/Region of Manufacture:
- United States
- Output Power:
- 3900W (3.9 kW)
- Input Voltage:
- 208V AC, 3-Phase
- Input Power Rating:
- 7000VA Maximum
- Output Connector:
- JHV1 (SHV-style coaxial, rear panel)
- Front Panel Display:
- Digital kilovolt and milliampere meters
- Front Panel Controls:
- Voltage control knob, current control knob, polarity select
- External Interlock:
- Yes
- Applications:
- Coating, charging, beam control, laboratory and industrial
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$5,940.00Was: $15,000.00 -
RFVII RF-20-XXVII 2000W RF Generator 27.12 MHz 200-240VAC ICP Plasma 19" Rack
RFVII
$4,000.00Was: $8,000.00RFVII RF-20-XXVII 2000W RF Generator 27.12 MHz 200-240VAC ICP Plasma 19" Rack RF generator for ICP plasma, inductively coupled plasma mass spectrometry, induction heating, and medical applications...53328- SKU:
- 53328
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 45.00 LBS
- Brand:
- RFVII (RF VII, Inc.)
- Model:
- RF-20-XXVII
- MPN:
- RF-20-XXVII
- SKU:
- 53328
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; no accessories observed in photos.
- Country of Manufacture:
- USA
- Form Factor:
- 19" Rackmount
- Power Requirements:
- 200-240VAC, Single Phase, 20A
- Output Frequency:
- 27.12 MHz
- Output Power:
- 2000 Watts (2 kW)
- Cooling Method:
- Air Cooled
- Remote Control:
- 0-5 Vdc (10 Vdc option); RS-232 Serial
- Pulsing:
- 1-999 Hz / Duty Cycle 5-95%
- RF Output Connector:
- Large coaxial RF OUT connector (rear panel)
- Remote Interface:
- DB9 Serial (RS-232), rear panel
- Power Connector:
- 200-240VAC twist-lock (rear panel)
- Front Panel Displays:
- Incident & Reflectant power meters (4-digit LED)
- Application:
- ICP Plasma, MassSpec Plasma, Induction Heating, Medical
- Compatible With:
- Replaces RFPP 2KW 27.12 MHz ICP Generator
- Condition Notes:
- This RFVII RF-20-XXVII 2000W 27.12 MHz RF Generator has been inspected and is in good used condition. The unit was pulled from a working environment where it was previously in active service.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$4,000.00Was: $8,000.00 -
Advanced Energy Paramount Plus 6060 VHF RF Generator 31550260-663
Advanced Energy
$15,000.00Was: $30,000.00Advanced Energy Paramount Plus 6060 VHF RF Generator 31550260-663 The Advanced Energy Paramount Plus 6060 is an industrial VHF RF power generator designed for plasma-based semiconductor...53327- SKU:
- 53327
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 100.00 LBS
- Brand:
- Advanced Energy
- Model:
- Paramount Plus 6060
- Secondary Model:
- 660-189197R100
- MPN:
- 31550260-663
- SKU:
- 53327
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes part numbers 31550260-663 and 660-189197R100. No power supply, cables, or accessories included unless noted separately.
- Form Factor:
- Benchtop / Integrated RF Generator
- Country of Manufacture:
- United States
- Power Requirements:
- 200–208V AC, Three Phase, 50–60 Hz, 40A maximum
- Cooling:
- Water-cooled (facility water connection required; disconnect before servicing)
- Max Water Pressure:
- 6.9 Bar / 690 kPa
- RF Type:
- VHF (Very High Frequency) RF Power Generator
- Application:
- Plasma deposition, wafer processing, ion implantation, semiconductor manufacturing
- Certifications:
- CE, RoHS Compliant, CSA (C/US)
- Date Code:
- 08/2015
- Radiation Warning:
- Non-ionizing radiation present. No user-serviceable parts. Do not remove cover.
- Phase:
- Three Phase
- Voltage Rating:
- 200-208V AC
- Current Rating:
- 40A Maximum
- Frequency:
- 50-60 Hz
- Condition Notes:
- This Advanced Energy Paramount Plus 6060 VHF RF Generator was professionally pulled from a working production environment where it was in operational service.
- Frequency Band:
- VHF (Very High Frequency)
- Water Cooling Pressure Rating:
- 6.9 bar / 690 kPa
- Compatible With:
- Plasma process chambers, CVD/PECVD systems, RIE tools, RF delivery systems
- Secondary Reference:
- 660-189197R100
- Product Type:
- VHF RF Power Generator
- Power Input:
- Three-phase AC
- Maximum Input Current:
- 40A
- Thermal Management:
- Integrated water cooling
- Compatible Systems:
- RF delivery systems, impedance-matching networks, plasma process chambers
- Type:
- VHF RF Power Generator
- Country/Region of Manufacture:
- United States
- Compatible With (2):
- Impedance matching networks, RF delivery networks
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$15,000.00Was: $30,000.00 -
Advanced Energy Navigator II 3155999-175 RF Match Network 13.56 MHz Plasma
Advanced Energy
$5,000.00Was: $10,000.00Advanced Energy Navigator II 3155999-175 RF Match Network 13.56 MHz Plasma RF impedance matching network for 13.56 MHz plasma systems. Standalone benchtop module that interfaces with Advanced Energy...53326- SKU:
- 53326
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 26.00 LBS
- Brand:
- Advanced Energy
- Model:
- Navigator II
- MPN:
- 3155999-175
- Secondary Model / Part Number:
- 1335752
- SKU:
- 53326
- Condition:
- Used – Inspected
- Seller Notes:
- Unit only; inspected. Pulled from a working semiconductor process environment.
- Country of Manufacture:
- China
- Form Factor:
- Benchtop / Standalone Module
- Frequency:
- 13.56 MHz
- Application:
- RF Impedance Matching – Plasma Etch / CVD / PVD
- Hardware Revision:
- Rev A
- Interface – Configuration:
- DIP Switch (Configuration Header)
- Interface – Host:
- DB-9 (J1) + RJ-45 EtherCAT (Act/In/Link)
- Interface – Service:
- RJ-45 Ethernet (Out/Link/Error)
- Interface – RF Input:
- Coaxial RF IN (J2)
- Interface – Pulse Sync In:
- SMA / BNC (J5)
- Interface – Interlock:
- DB-9 (J4)
- Interface – DC Power:
- Circular Power Input Connector
- Status Indicators:
- Power, Tuned, Fault LEDs
- Network Protocol:
- EtherCAT
- Compatible With:
- Advanced Energy RF Generators, Plasma Etch / CVD Systems
- Condition Notes:
- Advanced Energy Navigator II 3155999-175 RF Match Network, 13.56 MHz — used, inspected. Pulled from an active semiconductor process environment. Chassis shows light surface wear. All I/O connectors present and intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$5,000.00Was: $10,000.00 -
Advanced Energy RFDS 2000-2V RF Generator 3155038-013 13.56MHz 5kW 208V 3P
Advanced Energy
$2,500.00Was: $5,000.00Advanced Energy RFDS 2000-2V RF Generator 3155038-013 13.56MHz 5kW 208V 3P RF power generator for semiconductor processing applications. Operates at 13.56 MHz with 5 kW output power, water-cooled...53323- SKU:
- 53323
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 32.00 LBS
- Brand:
- Advanced Energy
- Model:
- RFDS 2000-2V
- MPN:
- 3155038-013
- SKU:
- 53323
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Sold AS-IS for parts or repair. Not tested. Unit only — no cables included.
- Form Factor:
- Benchtop / Enclosed Module
- Power Requirements:
- 208V, 3-Phase, 50/60Hz, 5kW
- Output Frequency:
- 13.56 MHz
- Power Rating:
- 5 kW
- Voltage Rating:
- 208V
- Phase:
- Three Phase
- Frequency:
- 50/60 Hz
- Output Voltage:
- 387V (labeled on output panel)
- Cooling Method:
- Water Cooled
- Max Water Pressure:
- 6.90 Bar / 690 kPa
- Control Interface:
- D-Sub (DB-25 style) Control Connector
- Input Connector:
- High-current multi-pin circular connector
- Output Connector:
- Coaxial RF output port
- Status Indicators:
- AC On, RF On, Alarm LED indicators
- Certifications:
- CSA NRTL/C, CE, LR 106911
- Application:
- Plasma etch, CVD, PVD, semiconductor processing
- Country of Manufacture:
- USA
- Hardware Revision:
- C
- Compatible With:
- Plasma etch and deposition systems using 13.56 MHz RF
- Condition Notes:
- Advanced Energy RFDS 2000-2V RF Generator 3155038-013 sold AS-IS for parts or repair. Pulled from working environment; not tested at our facility. No functionality guarantee. Cosmetically good. Contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$2,500.00Was: $5,000.00 -
HP 608F VHF Signal Generator 10-455 MHz 115/230V 50-400Hz Hewlett Packard
Hewlett Packard
$450.00Was: $900.00HP 608F VHF Signal Generator 10-455 MHz 115/230V 50-400Hz Hewlett Packard Benchtop VHF RF signal generator covering 10 MHz to 455 MHz across five frequency bands. Generates continuously adjustable...53310- SKU:
- 53310
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 45.00 LBS
- Brand:
- HP
- Model:
- 608F
- MPN:
- 608F
- SKU:
- 53310
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Sold as-is for parts or repair. Powers up; connectors and controls need cleaning.
- Country of Manufacture:
- United States
- Form Factor:
- Benchtop
- Power Requirements:
- 115/230 VAC ±10%, 50–400 Hz, DC 0.25A
- Measurement Type:
- VHF RF Signal Generation
- Frequency Range:
- 10 MHz to 455 MHz (5 bands)
- Frequency Bands:
- 10-21, 21-44, 44-95, 95-210, 210-455 MHz
- Output Level:
- 0.1 µV to 0.5 V into 50 Ω (continuously adjustable)
- Output Impedance:
- 50 Ω, SWR 1.2 (return loss 20.8 dB)
- Modulation:
- AM internal 400 Hz or 1000 Hz; external AM or pulse
- Modulation Depth:
- 0–95%
- Frequency Accuracy:
- 1% with fine adjustment
- Crystal Calibrator:
- 1 MHz and 5 MHz
- Compatible With:
- HP 8708A Synchronizer
- Application:
- Receiver alignment, antenna testing, RF calibration, lab use
- Condition Notes:
- Hewlett Packard 608F VHF Signal Generator (10-455 MHz, 115/230V, 50-400Hz) — tested and confirmed to power on at our facility. The unit is fully functional and operational.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$450.00Was: $900.00 -
General Radio W10 Variac Variable Autotransformer 120V 10A 50-60Hz Panel
General Radio Company
$175.00Was: $500.00General Radio W10 Variac Variable Autotransformer 120V 10A 50-60Hz Panel The General Radio Company W10 is a panel-mount variable autotransformer — commonly known by the Variac trade name — designed...53217- SKU:
- 53217
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 16.00 LBS
- Brand:
- General Radio
- Model:
- W10
- MPN:
- W10
- Type:
- Variable Autotransformer (Variac)
- SKU:
- 53217
- Condition:
- Used – Pulled from Working Environment
- Input Voltage:
- 120V AC
- Current Rating:
- 10 Amperes
- Frequency:
- 50-60 Hz
- Phase:
- Single Phase
- Output Voltage:
- 0-120V AC (variable)
- Form Factor:
- Panel Mount
- Terminal Configuration:
- 5 screw terminals on top plate
- Winding Style:
- Toroidal
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Unit only — no enclosure or mounting hardware included.
- Condition Notes:
- This General Radio Company W10 Variac Variable Autotransformer has been inspected and is in good used condition. The unit was pulled from a working environment where it was previously in service.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$175.00Was: $500.00 -
Omron LY2N-D2 General Purpose Relay 2PDT 10A 24VDC w/ PTF08A Socket Base
Omron
$20.00Was: $40.00Omron LY2N-D2 General Purpose Relay 2PDT 10A 24VDC w/ PTF08A Socket Base A 2PDT general purpose relay rated for 10A at 24VDC coil voltage. The relay switches up to 110VAC/240VAC loads and mounts via...53214- SKU:
- 53214
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Omron
- Model:
- LY2N-D2
- MPN:
- LY2N-D2
- Type:
- General Purpose Relay
- SKU:
- 53214
- Coil Voltage:
- 24V DC
- Contact Configuration:
- 2PDT (Double Pole Double Throw)
- Contact Rating (Amps):
- 10A
- Contact Voltage Rating:
- 110VAC / 240VAC
- Socket / Base Model:
- Omron PTF08A
- Number of Poles:
- 2
- Case Style:
- Transparent
- Indicator:
- LED operation indicator
- Mounting:
- Socket / DIN Rail via PTF08A base
- Socket Rating:
- Max 15A 240V
- Certifications:
- UL, CE
- Country/Region of Manufacture:
- Japan
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes relay and matching Omron PTF08A socket base with wired leads
- Condition Notes:
- This Omron LY2N-D2 General Purpose Relay with PTF08A socket base was removed from a large industrial controller system and is in good used condition. The transparent relay case is intact and the internal coil assembly is visible and undamaged.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$20.00Was: $40.00 -
Omron G3PA-420B Solid State Relay 20A 200-480VAC 24VDC Input 50-60Hz SSR
Omron
$50.00Was: $100.00Omron G3PA-420B Solid State Relay 20A 200-480VAC 24VDC Input 50-60Hz SSR Solid state relay (SSR) with integrated aluminum heat sink for switching AC loads. Operates on 3-32VDC control input and...53207- SKU:
- 53207
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Omron
- Model:
- G3PA-420B
- MPN:
- G3PA-420B
- Type:
- Solid State Relay (SSR)
- SKU:
- 53207
- Load Voltage:
- 200-480VAC
- Load Current:
- 20A
- Control Input Voltage:
- 3-32VDC
- Frequency:
- 50/60Hz
- Switching Type:
- Zero-Cross (AC Output)
- Relay Series:
- G3PA
- Heat Sink:
- Integrated aluminum heat sink included
- Mounting:
- Panel Mount / DIN Rail compatible
- Country/Region of Manufacture:
- Japan
- Certifications:
- UL, CE
- Seller Notes:
- Unit includes integrated heat sink as shown in photos.
- Condition:
- Used – Pulled from Working Environment
- Condition Notes:
- This Omron G3PA-420B Solid State Relay was removed from a large industrial controller system and is in good used condition. The relay module and integrated aluminum heat sink are intact with no visible damage.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$50.00Was: $100.00 -
Specialty Microwave 573874-1 LNA Control Panel SATCOM 120V Dual PSU Rack Mount
Specialty Microwave
$750.00Was: $1,500.00Specialty Microwave 573874-1 LNA Control Panel SATCOM 120V Dual PSU Rack MountThe Specialty Microwave 573874-1 is a rack-mount Low Noise Amplifier (LNA) control panel designed for SATCOM ground...53107- SKU:
- 53107
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 23.00 LBS
- Brand:
- Specialty Microwave
- Model:
- 573874-1
- MPN:
- 573874-1
- Type:
- LNA Control Panel
- SKU:
- 53107
- Seller Notes:
- Includes two power cords. Unit only — no additional accessories.
- Form Factor:
- Rack Mount
- Power Requirements:
- 120V AC, Dual Power Supply
- Number of Power Supplies:
- 2 (PS1 and PS2, each 7.5A fused)
- Number of LNA Channels:
- 3 (LNA1, LNA2, LNA3 — each 0.25A fused)
- Control Modes:
- Local and Remote
- Front Panel Indicators:
- Multi-color LED matrix; Auto, Man, REM, LCL, Fault, PS1, PS2
- Front Panel Controls:
- Lamp Test, Fault Reset, Local Select (POS1/POS2), Execute, Mismatch
- Signal Path:
- Vertical In, Horizontal In, Vertical Out, Horizontal Out, Offline In/Out
- Switching Matrix:
- S1 / S2 redundancy switching with LNA1, LNA2, LNA3
- Rear Connectors:
- J1 circular mil-spec connector, J2 DB-25, J5 DB-9, coax ports
- Rear Fusing:
- PS1 7.5A, PS2 7.5A, LNA1/2/3 each 0.25A
- Application:
- SATCOM ground station LNA redundancy and switching control
- Compatible With:
- SATCOM ground station systems requiring LNA switching control
- Co-Branding / OEM:
- AIL / Eaton Advanced Electronics (labeled on front panel)
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Inspected and Tested
- Condition Notes:
- Specialty Microwave 573874-1 LNA Control Panel pulled from a working SATCOM environment. Powered on — all LEDs illuminate on lamp test; front and rear switches engage. Output not tested. Good cosmetic condition. Includes two power cords.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$750.00Was: $1,500.00 -
Fisherbrand Traceable S11120 Hygrometer Thermometer Dew Point Meter Data Logger
Fisherbrand
$140.00Was: $275.00Fisherbrand Traceable S11120 Hygrometer Thermometer Dew Point Meter Data LoggerHandheld meter for simultaneous measurement of humidity, temperature, and dew point. Features integrated data logging...53048- SKU:
- 53048
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Fisherbrand
- Model:
- S11120
- MPN:
- S11120
- Type:
- Hygrometer / Thermometer / Dew Point Meter with Data Logger
- SKU:
- 53048
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Includes humidity/temperature probe, RS-232 cable, documentation sheet, and hard carrying case
- Country/Region of Manufacture:
- United States
- Form Factor:
- Handheld
- Measurement Type:
- Humidity, Temperature, Dew Point
- Temperature Range:
- 32.00 to 122.00°F / 0.00 to 50.00°C
- Temperature Resolution:
- 0.01°
- Humidity Range:
- 0.00 to 95.00% RH
- Humidity Resolution:
- 0.01%
- Dew Point Range:
- -13.50 to 120.10°F / 25.30 to 48.90°C
- Dew Point Resolution:
- 0.01°
- Data Logging Capacity:
- 1000 readings
- Interface / Data Output:
- RS-232 (PC serial interface)
- Display:
- Dual LCD (primary large display + secondary smaller display)
- Functions:
- Data Logger, Min/Max Memory, Hold, Record/Enter
- Certifications:
- CE
- Compatible With:
- PC via RS-232 serial interface
- Includes:
- Meter, humidity/temperature probe, RS-232 cable, hard case, documentation
- Condition Notes:
- Fisherbrand Traceable S11120 Hygrometer/Dew Point Meter Data Logger tested and in good working order. Powers on, LCD displays correctly, all buttons functional. Includes probe, RS-232 cable, documentation, and hard carrying case.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$140.00Was: $275.00 -
Eaton ASY-0647 3000W Battery Charger Module 200-240V 16A for 9170 Rackmount UPS
Eaton
$225.00Was: $450.00Eaton ASY-0647 3000W Battery Charger Module 200-240V 16A for 9170 Rackmount UPSBattery charger module designed for the Eaton 9170 Rackmount UPS system. This slide-in cartridge module handles charging...52924- SKU:
- 52924
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 20.00 LBS
- Brand:
- Eaton
- Model:
- ASY-0647
- MPN:
- ASY-0647
- Secondary Model:
- M650N3000G020003
- Type:
- UPS Battery Charger Module
- SKU:
- 52924
- Compatible With:
- Eaton 9170 Rackmount UPS, Powerware 9170
- Input Voltage:
- 200-240V AC
- Input Current:
- 16A
- Frequency:
- 60Hz
- Power Rating:
- 3000W
- Phase:
- Single Phase (Split Phase)
- Certifications:
- CE, cULus (E99255)
- Form Factor:
- Rackmount Module / Slide-In Cartridge
- Connector Type:
- Multi-pin blade connectors; wide SCSI-style data connector
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Pulled from an Eaton 9170 Rackmount UPS. Unit only — no additional accessories.
- Condition Notes:
- Eaton ASY-0647 3000W Battery Charger Module pulled from an Eaton 9170 Rackmount UPS. Inspected and in good used condition. Labels intact, connectors undamaged. Please view photos and contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$225.00Was: $450.00 -
Best Power Axxium Pro 18kVA UPS 0650C120AAA 208-240V Modular w/ Batteries
Best Power
$2,800.00Was: $12,000.00Best Power Axxium Pro 18kVA UPS 0650C120AAA 208-240V Modular w/ BatteriesOnline double-conversion UPS system providing continuous power conditioning and battery backup for critical infrastructure...52918- SKU:
- 52918
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 679.00 LBS
- Brand:
- Best Power
- Model:
- Axxium Pro
- MPN:
- 0650C120AAAAO
- Secondary Model:
- ASY-0673
- Type:
- Modular Online Double-Conversion UPS
- SKU:
- 52918
- Seller Notes:
- Includes battery modules; BestLink SNMP/Web adapter installed
- Country/Region of Manufacture:
- United States
- Form Factor:
- Tower / Floor-Standing
- Power Rating:
- 18 kVA / 12.6 kW
- Nominal Input Voltage:
- 208-240V AC
- Input Voltage Range:
- 176-276V AC
- Nominal Output Voltage:
- 208-240V AC
- Input Current:
- 16A
- Phase:
- Single Phase
- UPS Topology:
- Online Double-Conversion (Transformerless)
- Scalability:
- Modular — up to 12 expansion slots
- Redundancy:
- N+X Power and Logic Redundancy
- Battery Type:
- Sealed Lead Acid (SLA), 96V
- Battery Capacity:
- 7.2Ah MAX per module (5 cells per module)
- Battery Part Number:
- ASY-0529
- Management Interface:
- BestLink SNMP/Web Adapter, 10BaseT LAN, RS-232
- Network Management Card:
- BestLink SNMP/WEB Adapter (installed)
- Condition:
- Used – Pulled from Working Environment
- Compatible With:
- Best Power / Powerware Axxium Pro series
- Condition Notes:
- Best Power Axxium Pro 18kVA UPS inspected and in good used condition; pulled from a working environment. Battery modules included but date from 2016 — evaluate before reuse. BestLink SNMP adapter installed.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$2,800.00Was: $12,000.00 -
Eaton 9395-275 Power Xpert 225KVA 480V 3-Phase UPS Uninterruptible Power Supply
Eaton
$12,000.00Was: $24,000.00Eaton 9395-275 Power Xpert 225KVA 480V 3-Phase UPS Uninterruptible Power Supply Double conversion online UPS system designed to provide continuous power backup for data centers, healthcare...52907- SKU:
- 52907
- Availability:
- This is a large, heavy industrial UPS. Please contact us prior to purchasing to arrange freight shipping and logistics.
- Weight:
- 2,719.00 LBS
- Brand:
- Eaton
- Model:
- 9395-275
- MPN:
- 9395-275
- SKU:
- 52907
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Pulled from a local data center. Inspected, no batteries included.
- Form Factor:
- Freestanding Cabinet
- Country of Manufacture:
- United States
- Power Rating:
- 225 KVA / 205 KW
- Voltage Rating (Input):
- 480 VAC, 3-Phase, 3W/PE, 60Hz
- Current Rating (Input):
- 300 Amps
- Voltage Rating (Output):
- 480 VAC, 3-Phase, 3W/N/PE, 60Hz
- Current Rating (Output):
- 271 Amps
- Bypass:
- 480 VAC, 3W/N/PE, 60Hz, 3-Phase, 271A, 225 KVA
- DC Bus Voltage:
- 480 VDC
- DC Bus Current:
- 451 Amps
- Phase:
- Three Phase
- Frequency:
- 60 Hz
- UPS Type:
- Double Conversion Online Modular UPS
- Universal Power Module Part No.:
- 105006250
- Configuration:
- CB22106130000R3
- Application:
- Data Center, Healthcare, Critical Power, Industrial
- Display:
- Color LCD Touchscreen
- Certifications:
- UL Listed
- Compatible With:
- Eaton 9395 Series, Data Center Critical Power Systems
- Condition Notes:
- This Eaton 9395-275 Power Xpert 225KVA 480V 3-Phase UPS has been inspected and appears to be in good condition overall. It was pulled from a local data center. Cabinets show typical surface wear consistent with data center use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$12,000.00Was: $24,000.00