Semiconductor Tools

Accuprobe Dual D-Type Probe Standard Long Hard BeCu - USED - D2HB7B3 For use with Probe Cards D: Blade Type: Standard 2: Holder: Long: 1.720" (43.688mm) HB: Needle Material and Diameter: BeCu 15 mils (.381 mm) 7: Tip Diameter: 0.005" (.127mm) B:...

e p/n: 0001-00219-00

Advanced Energy 10kW AE AE RAS Split Inductor Power Supply 40Hz 3152522-001B We are unable to test this power supply. Please view out photo set and contact us with any questions.

Advanced Energy 2011-011-C MDX Series DC Power Supply - Magnetron Drive Overall Dimensions: 24" x 20" x 7" -- 57 LBS This used power supply can not be fully tested at our facility. Please view our photo set and contact us with any questions.

Advanced Energy 3155017-000 M RF Match

Advanced Energy B5181854DD AE MDX Pinnacle 8kW DC Power Supply 3152352-122B P/N: B5181854DD M/N: 3152352-122B Power Input: Volt: 400 AC Current: 22 Amp Freq: 50/60 Hz Phase-3

Advanced Energy MDX 2226-000-F Magnetron Drive Power Supply - Sputtering Systems 380 / 415 Volt AC, 25 Amps, 50/60 Hz Overall Dimensions: 25" x 19" x 7" -- 85 LBS This used power supply can not be fully tested at our facility. Please view our photo...

Advanced Energy MDX-10K DC Magentron Slave Power Supply - 2012-010-C m/n: 2012-010-C Overall Dimensions: 20" x 19" x 7" -- 53 LBS This used power supply can not be fully tested at our facility. Please view our photo set and contact us with any...

Advanced Energy MDX-2.5K DC Sputter Power Supply - 2224-006-B M/N: 2224-025-A Overall Dimensions: 25" x 19" x 7" -- 73 LBS This used power supply can not be fully tested at our facility. Please view our photo set and contact us with any questions.

Advanced Energy MDX-5K DC Magnetron Sputter Power Supply - 2011-029 All of the units are MDX-5K with differing quantities of the following M/N numbers. Please contact us in advance if a specific REV is...

Advanced Energy PI-980 Aera Pressure Insensitive MFC CAL DATA AMAT FCPIDN980C-ABA BIN: MULTI-08 RANGE: 10000 SCCM CAL GAS: N2 DNET FW: 2.10 N2 FLOWS: 100%: 10000.716 SCCM 50%: 499.351 SCCM 30%: 2999.593 SCCM 10%: 999.281 SCCM DIAPHRAGM:...

Amistar JEDEC Tray Option PlaceMaster FP Tray Chip Loader - As Is / For Parts   Thirteen Loading Trays Data Interface Connections Pneumatic Hose Overall Dimensions: 20" x 20" x 37" Tall -- 180 LBS (approximately) This vintage loader powers...

Applied Magnetics 559883 SFL Grammer w/ linear slide and air actuated Precision Custom Designed Machine used to align drive heads

Applied Magnetics AMG Mono Monolithic Gold Reference Grammer w/ Wood Case Analogic Measureometer II Electronic Display Air actuated precision jig setup

Camtek Falcon PD 200mm Optical Wafer Inspection System w/ Basler A201b Camera - As Is The maximum size wafer this machine can process is 200 mm 220VAC 50/60HZ Basler Camera, Model: A201b (monochrome) Basler Camera Resolution: 1 MP, 1008(H) x...

CPS 1966-00-0030 TFE High Voltage Power Supply - Etec MEBES Flectrostatic Focus −15 kV@10μA +15 kV@1 mA +30 kV@10 μA −2 kV @ 10 μA +5.5 V @ 0 to 3.5 A This used power supply pow Overall Dimensions: 26" x 19" x 11" Tall --...

Dima SMDU-5000 Dotmaster Automatic Dispensing Unit - Solder Dot Placer Power Rating: 115 / 230 Volt AC, 5 Amp, 125 Watt, 50/60 Air Input: 4 Bar Powers on and lights up, but we do not have the software to test and run it. Includes a User Manual...

Dr. Schenk 4 250 415 Customer I/O Converter Box 24 VDC Voltage

Drytek DRIE-100 Cassette Planar Plasma Wafer Etcher System Uses chlorine- and fluorine-based chemistries for etching various Si, polysilicon, nitride, tungsten, tungsten silicide films.+ Low energy etching for minimal substrate damage. Excellent...

Dytex Products 6.5" MAX Circuit Board Holder - No Pads MAX Span: 6.5" This holder no longer has the rubber gripping pads. This holder expands and contracts okay, the swivel base will lock in place as intended. Please view our photo set and contact us...