Vacuum Chamber Accessories

Aluminum Fluid Chamber with DN40KF Vacuum Flanges and Course Filters Upper vacuum ports: DN40KF / NW-40 - OD: 55 mm, ID 41 mm Smaller upper port OD: 1-7/8 Diameter Larger upper port OD: 3-13/16 Diameter Side ports: 1/4 NPT Chamber dimensions...

Aluminum KF-16 LOT OF 5 Hinge Clamp Vacuum Fittings - ISO-KF Flange Size NW-16   This used lot of FIVE vacuum flanges has been inspected and appears to be in good condition. Please view our photo set and contact us with any questions. ...

Input / output port Inner Dimensions: 7/8 Max inlet pressure: 800 PSI Mas outlet 100 PSI  Condition:This item has been inspected and appears to be in good condition

Aurion Anlagentechnik B-MBT-48 30kW T300 Matchbox Prodik RF Sputtering   Overall Dimensions: 23" x 20" x 13" -- 65 LBS This used sputtering device has been inspected and it appears to be in good condition. It has not been tested. Please view...

Balzers BG 543 610 -T RF Microwave Plasma Igniter with DN40KF Flange Leads are only SEMI-flexible and should not be bent. This unit is untested. It was pulled from a 2.5 kW @ 13.56 MHz RF Plasma Generator system. Alternate Part Numbers: BG54360-T,...

Balzers BP-226-106-T Vacuum Chamber O-Ring w/Housing  Condition:This item is new from the manufacturer, but could have been stored for a long time or past its expiration date, or is out of its original packaging. Please view our photo set and...

Burkert US05812 General Purpose Soleniod Valve 1 NPT Ports Stainless steel body Normally closed 24 VDC, 8 W 140 PSI MAX  Condition:This item is new but may be out of the original box.

15/16 Hose fitting

Cashco 8903 stainless steel pressure reducing regulator  Condition:This item has been inspected and it is in good condition.

Comdel CPS-200AX High Frequency Power Supply / RF Generator with N Socket Output   Overall Dimensions: 11" x 10.5" x 6" -- 25 LBS This used power supply has been inspected and it appears to be in good condition. It has not been tested. Please...

Cryogenic Associates Vacuum Chamber with Detector. We are unsure as to the type of detector is may be a PMT or used for some type of spectral analysis.  Condition:This item has been inspected and appears to be in good condition

Cryogenic Associates R-141212-75 High Vacuum test chamber2.75 inch Port, 1.75 inch window. 3.75 w x 4.50 d x 8.25 h  Condition:This item has been inspected and it is in good condition.

CTI Cryogenics 140316 Compressor He Return Line Aeroquip 5400-S5-4 and 5400-S2-4 Low Air Inclusion Refrigerant Coupling (one on each end) Coupling has a 0.75" hex nut  Condition:This hose line has been inspected and it appears to be in good...

CTI Cryogenics OLFLEX 190 1.7 foot Power Cable w/ 4 Pin male to 4 Pin Female  Condition:This item has been inspected and appears to be in good condition. It was pulled from a working environment where it was in use and functional. Please view our...

Denton Vacuum SD-10 Vacuum Monitor  Condition:Please view our photo set and contact us if you have any questions about the condition of this item.

Edwards E085-47-000 240v Ion Beam HT Power Supply for Auto 306 Coater Model: E085-47-000 for Edwards High Vacuum  Condition:This item has been inspected and appears to be in good condition

Edwards High Vacuum Changeover Valve and Vibration Isolation System Block 1 Ports  Condition:This item has been inspected and it is in good condition.

Generic 7 x 6 x 5 Electronic Shutter  Condition:This item has been inspected and appears to be in good condition

Stainless steel rings 10 OD x 8.25 ID screen holes .1875  Condition:This item has been inspected and it is in good condition.

GNB Corporation G10PSORPX 10" Stainless Steel Pneumatic Gate Valve Opening: 10" diameter Flange: 16" diameter Overall Dimensions: 45" x 18" x 5" -- 128 LBS This used valve has been inspected and it appears to be in good condition. We cannot test it...