Description

Xunlight XRD36-300 300W 59V Flexible Amorphous Solar Panel - No Cables - Metal Tabs - No Peel and Stick backing making them lighter and easier to roll and carry. High GRADE ETFE Flexible top Sheet - Factory Second

Name: Xunlight XRD36-300 300W 58V Flex Amorphous Solar Panel - No Cables - Metal Tabs
Brand: Xunlight
SKU: 52377
Price: 291 USD
Availability: InStock

These flexible panels came from Xunlight Factory in Ohio and are factory 2nds because of cosmetic issues. These are tested for power output prior to shipping and should provide at least 95% of rated capacity sometimes even more as they are very robust flexible solar panels. Xunlight Solar Panels are very flexible and utilize Amorphous Silicon technology. These panels are very light and strong because each stainless steel flexible solar cell is encapsulated with a special formula of EVA and ETFE which was used to provide resistance to daily sun weather and wind for 20 plus years. These panels were made in Ohio USA from 2012 to 2015. This flexible technology is very hard to cost-effectively recreate and since Xunlight has gone out of business these are the last of these very special flexible solar panels.

Panel does not have cables. There are Metal Tabs for soldering Junction Boxes - Includes 1 pair of loose / unattached male/female MC4 connectors for DIY assembly. It will require 2x short electrical wires to attach tabs to junction boxes - NOT INCLUDED

Electrical Stats (approximate):

Peak Stats at 100% Factory-Perfect Simulated Sun

Maximum Power (Pmax): 300 Watts

Peak Power (Vpmax): 57.9 Volts

Peak Power (lpmax): 5.71 Amps

Open Circuit Volts (Voc): 78 Volts

Short Circuit Amps (Isc): 7.7 Amps

Max System Voltage: Designed for 1000 Volts, however, these should be used for battery charging.

Module Efficiency: 6.2%

Physical Stats

Overall dimensions: 16 Feet 9 Inches Long x 2 Feet 11 Inches Wide (203" x 35") -- 26 LBS

Rolled-up diameter: 12 inches (approximate)

This panel consists of 36 10.75x16 solar cells

Connectors: Metal Tabs for soldering Junction Boxes - Includes 1 pair of loose / unattached male/female MC4 connectors for DIY assembly

Link for Cables: https://www.ebay.com/itm/264433066904

The color of the solar cells and/or borders may vary from the panel shown in the photographs.

Lightweight & Flexible

Virtually Unbreakable (No Glass)

Shadow & High Heat Tolerant - Triple Junction Amorphous Technology

Frame Material: Frameless

Condition: Open Box

These flexible panels came from Xunlight Factory in Ohio and are factory 2nds because of cosmetic issues. These are tested for power output prior to shipping and should provide at least 95% of rated capacity sometimes even more as they are very robust flexible solar panels. Xunlight Solar Panels are very flexible and utilize Amorphous Silicon technology. These panels are very light and strong because each stainless steel flexible solar cell is encapsulated with a special formula of EVA and ETFE which was used to provide resistance to daily sun weather and wind for 20 plus years. These panels were made in Ohio USA from 2012 to 2015. Connectors: Metal Tabs for soldering Junction Boxes. We have had multiple units in stock and the unit shipped may vary from the unit photographed. Please view our photo set and contact us if you have any questions.

View AllClose