Clicky

RasterOps 351 Video Expander

$60.00
(No reviews yet) Write a Review
SKU:
32213
Condition:
Used
RasterOps 351  Video Expander

Out of stock

RasterOps Video Expander BOARD SUPPORTED:8/24S,364,16PC,8-24 (APPLE) AND EQUIVILANT BOARDS (NTSC rates). STAND ALONE MODE:
  • GENLOCK switch set to INTERNAL
  • SUBCARRIER (SC) switch set to INT SC
  • SUBCARRIER ADJUST is not applicable in this mode
  • TERMINATION is not applicable in this mode 8/24S, 364 and 16PC in GENLOCK MODE:
  • GENLOCK switch set to GENLOCK only in case of 8/24S or 364 (16PC board performs its own genlocking)
  • SUBCARRIER (SC) switch set to INT SC unless EXT.SC (2vpp into 75 ohms) is inputed.
  • SUBCARRIER ADJUST switch and fine adj. are set as necessary to achieve correct hue.
  • TERM.switch is ON if expander is end of the line and no other devices are terminated and more downstream, TERM is OFF.
  • EXT. VIDEO can be RS-170(A) COMPOSITE VIDEO (1vpp), COMPOSITE VIDEO (1vpp), COMPOSITE SYNC (1-4VPP), BLACK BURST, or the Y portion of S-VIDEO.
  • The EXPANDER will output RGB and RS-170 SYNC, COMPOSITE and S-VIDEO simultaneously, buffered into 75 ohm loads.