Description
RasterOps Video Expander BOARD SUPPORTED:8/24S,364,16PC,8-24 (APPLE) AND EQUIVILANT BOARDS (NTSC rates). STAND ALONE MODE: GENLOCK switch set to INTERNAL SUBCARRIER (SC) switch set to INT SC SUBCARRIER ADJUST is not applicable in this mode TERMINATION is not applicable in this mode 8/24S, 364 and 16PC in GENLOCK MODE: GENLOCK switch set to GENLOCK only in case of 8/24S or 364 (16PC board performs its own genlocking) SUBCARRIER (SC) switch set to INT SC unless EXT.SC (2vpp into 75 ohms) is inputed. SUBCARRIER ADJUST switch and fine adj. are set as necessary to achieve correct hue. TERM.switch is ON if expander is end of the line and no other devices are terminated and more downstream, TERM is OFF. EXT. VIDEO can be RS-170(A) COMPOSITE VIDEO (1vpp), COMPOSITE VIDEO (1vpp), COMPOSITE SYNC (1-4VPP), BLACK BURST, or the Y portion of S-VIDEO. The EXPANDER will output RGB and RS-170 SYNC, COMPOSITE and S-VIDEO simultaneously, buffered into 75 ohm loads.
View AllClose