Clicky

Xunlight XRD12-100 100W 19V Flexible Solar Panel for Battery Charging - Solarlok

(No reviews yet) Write a Review
SKU:
52096
MPN:
XRD12-100
Condition:
Used
Shipping:
Calculated at Checkout
  • Xunlight XRD12-100 100W 19V Flexible Solar Panel for Battery Charging - Solarlok
  • Xunlight XRD12-100 100W 19V Flexible Solar Panel for Battery Charging - Solarlok
  • Xunlight XRD12-100 100W 19V Flexible Solar Panel for Battery Charging - Solarlok
  • Xunlight XRD12-100 100W 19V Flexible Solar Panel for Battery Charging - Solarlok
  • Xunlight XRD12-100 100W 19V Flexible Solar Panel for Battery Charging - Solarlok
  • Xunlight XRD12-100 100W 19V Flexible Solar Panel for Battery Charging - Solarlok
$125.00

Out of stock

Description

Xunlight XRD12-100 100 Watt 19 Volt DC Flexible Amorphous Solar Panel for Battery Charging - Solarlok Connectors


Xunlight Solar Panels are very flexible and utilize Amorphous Silicon technology. These panels are very light and strong because each stainless steel flexible solar cell is encapsulated with a special formula of EVA and ETFE which was used to provide resistance to daily sun weather and wind for 20 plus years. These panels were made in Ohio USA from 2012 to 2015. This flexible technology is very hard to cost-effectively recreate and since Xunlight has gone out of business these are the last of these very special flexible solar panels. Panel is indented for charging batteries and other OFF-GRID application - not for grid-tie usage.

Electrical Stats (approximate):

Peak Stats at 100% Factory-Perfect Simulated Sun

  • Power Output (Wmax): 100 Watts
  • Peak Power (Vpmax): 19.4 Volts
  • Peak Power (lpmax): 5 Amps
  • Open Circuit Volts (Voc): 26.5 Volts
  • Short Circuit Amps (Isc): 6.35 Amps
  • Max System Voltage: Designed for 1000 Volts, however, these should be used for battery charging.
  • Physical Stats

  • Overall dimensions: 5.8 x 2.9 feet (70 x 35 inches)
  • Rolled-up diameter: 12 inches (approximate)
  • This panel consists of 12 11 x 16.75 solar cells
  • The color of the solar cells and/or borders may vary from the panel show in the photographs.
  • Connectors: Solarlok. Solarlok is not compatible with MC4. If you need to connect to MC4 you have a few options. One is to use a solarlok to MC4 connection set. If you're handy, you can cut off the Solarlok and crimp on a pair of MC4. We just wanted to give you a heads up on this so you're not surprised when you get them.
  • View AllClose