Linear Slides
-
SMC Cylinder with CDQ2KB32-35DM 10.25" extended length 14.00" CDQ2B32-60DM
SMC
$23.60Was: $50.00SMC Cylinder with CDQ2KB32-35DM 10.25" extended length 14.00" CDQ2B32-60DM Max Press: 1.0 MPa, 10.2 Kgf/cm, 145 PSI Condition: UsedThis item has been inspected and it is in good condition.47953- SKU:
- 47953
- Weight:
- 3.00 LBS
$23.60Was: $50.00 -
Linak Linear Actuator Housing LS 22-50
Linak
$21.30Was: $45.00Linak LS 22-50 A 6 mm dia shaft can be pulled out and two micro switches activated by this. The first one at 0.45 and the second at a 1.75 pull. The large through-hole is just over 30 mm dia (1.22) Length: 3.57 weight 0.39 lbm. Condition: New...26371- SKU:
- 26371
- Weight:
- 1.00 LBS
$21.30Was: $45.00 -
NB SMT TypeTwo Side Cut Flange Slide Bush SMT25GUU
NB
$19.50Was: $42.00NB SMT25GUU SMT Type Two Side Cut Flange Slide Bush Inner core diameter: 25 mm Seals on both sides Condition: UsedThis item has been inspected and it is in good condition.48164- SKU:
- 48164
- Weight:
- 3.00 LBS
$19.50Was: $42.00 -
SMC Cylinder with CDQ2KB32-75DM, Extended Length from 12.00" to 17.25" CDQ2B32-6
SMC
$19.50Was: $42.00Max Press: 1.0 MPa, 10.2 Kgf/cm, 145 PSI Condition: UsedThis item has been inspected and it is in good condition.47962- SKU:
- 47962
- Weight:
- 3.00 LBS
$19.50Was: $42.00 -
Schneeberger Micro Linear Rail / Stage 2 1/8" x 2 3/8" x 1 1/8" CH-4914
Schneeberger
$18.90Was: $40.00Schneeberger CH-4914 Micro Linear Rail / Stage 2 1/8 x 2 3/8 x 1 1/8 Condition: UsedThis item has been inspected and it is in good condition.40878- SKU:
- 40878
- Weight:
- 2.00 LBS
$18.90Was: $40.00 -
Lucas Ledex 195444-001 Linear Solenoid with Arm
Lucas Ledex
$14.20Was: $30.00Lucas Ledex 195444-001 Linear Solenoid with Arm Approximately 2-1/4" long and 1-1/4" in diameter Arm attached to end of solenoid piston Unknown voltage as pulled from tape drive assembly Condition: UsedThis item has been inspected and it is in...46650- SKU:
- 46650
- Weight:
- 1.00 LBS
$14.20Was: $30.00