Description
Grundfos CR 32-4 A-G-A-E-KUBE 20HP Vertical Multistage In-line Stainless Steel Centrifugal Pump with Alan Bradley ABB ACH550-UH-031A-4 20HP HVAC Drive
From the manufacturer:
CR 32-4 A-G-A-E-KUBE
Vertical, non-self-priming, multistage, in-line, centrifugal pump for installation in pipe systems and mounting on a foundation.
The motor is a 3-phase AC motor.
Liquid
- Pumped liquid: Water
- Liquid temperature range: 0 .. 120 °C
- Selected liquid temperature: 20 °C
- Density: 998.2 kg/m³
Technical
- Rated pump speed: 3444 rpm
- Rated flow: 36 m³/h
- Rated head: 87.2 m
- Code for shaft seal: KUBE
Materials
- Impeller: Stainless Steel
- EN-JS1050
- 80-55-06
- Mounting Base: Cast Iron
- EN 1.4301
- AISI 304
Installation
- Maximum ambient temperature: 40 °C
- Max pressure at stated temperature: 16 bar / 120 °C
- Type of connection: ANSI
- Size of suction port: 2 1/2" inch
- Size of outlet port: 2 1/2" inch
- Pressure rating for pipe connection: 125 Lb.
- Flange size for motor: 254TC
- Rubber flex bellow flanges measure 7" OD and 4.25" ID
Electrical data
- Motor type: Baldor
- Rated power - P2: 20HP (11 kW)
- Main frequency: 60 Hz
- Rated voltage: 3 x 208-230/460 V
- Service factor: 1.15
- Rated current: 38-34/17 A
- Cos phi - power factor: 0.94
- Rated speed: 3450 rpm
- Motor efficiency at full load: 90.2 %
- Number of poles: 2
- Enclosure class (IEC 34-5): 54 Dust/Splashing
- Insulation class (IEC 85): F
- Motor Number: 84Z05096
Weight
- Net weight: 139 kg
- Gross weight: 147 kg
- Shipping volume: 0.93 m³
ABB ACH550-UH-031A-4 HVAC Drive
- Series: ACH550
- Nominal Input VAC: 480 Volts AC
- Input Range VAC: 380 to 480 Volts AC
- Input Phase: 3
- HP (VT): 20 HP
- Amps (VT): 31 Amps
- Braking Type: Flux Braking
- IP Rating: IP21
- NEMA Rating: NEMA 1
- Frame Size: R3
- H x W x D: 23 in x 8 in x 9.1 in
Shipping and Tech notes
- Overall Dimensions - PUMP: 49" x 24" x 14" -- 366 LBS
- Overall Dimensions: - CONTROLLER: 23" x 9" x 8" -- 36 LBS
- This used pump and motor controller has been inspected and it appears to be in good condition. Was pulled working from a facility in California, but It has not been tested at our warehouse. Please view our photo set and contact us with any questions.
Condition:
This used pump and motor controller has been inspected and it appears to be in good condition. Was pulled working from a facility in California, but It has not been tested at our warehouse. Please view our photo set and contact us with any questions.