Description
Allen-Bradley 1769-IQ6XOW4 I/O Module, Combination 24VDC Sink/Source Input
From the manufacturer:
The 1769 Compact I/O modules can be used with a CompactLogix controller, as well as for expansion I/O in a MicroLogix 1500 controller assembly or in an assembly with a 1769-ADN DeviceNet adapter module. Unless connected to a MicroLogix 1500 base, each bank of I/O modules must include its own power supply. Install the I/O modules on a panel with two mounting screws or on a DIN rail. The modules mechanically lock together by means of a tongue-and-groove design and have an integrated communication bus that is connected from module to module by a movable bus connector.
- Current draw @ 5.1V 105 mA
- Current draw @ 24V 50 mA
- Heat dissipation, max 2.75 W
- Off-state voltage, max 11V DC
- Isolation voltage Verified by one of the following dielectric tests: 1200V AC for 1 s or 1697V DC for 1 s, input group to bus,
- output group to bus, and input group to output group
- 75V DC working voltage (IEC Class 2 reinforced insulation)
- Weight, approx 280 g (0.61 lb)
- Dimensions (HxWxD), approx 118 x 35 x 87 mm (4.65 x 1.38 x 3.43 in.)
- Height with mounting tabs 138 mm (5.43 in.)
- Slot width 1
- Module location DIN rail or panel mount
- Power supply 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4
- Power supply distance rating 8 modules
- Terminal screw torque 0.68 Nm (6 lbin)
- Retaining screw torque 0.46 Nm (4.1 lbin)
- Wire size (22…14 AWG) solid
- (22…16 AWG) stranded
- Wire type Cu-90 °C (194 °F)
- IEC input compatibility Type 1+
This item has been visually inspected and it appears to be in good condition. It was pulled from a working environment but has not been tested at our facility. Please view our photo set and contact us with any questions.
Condition: Used
This item has been visually inspected and it appears to be in good condition. It was pulled from a working environment but has not been tested at our facility. Please view our photo set and contact us with any questions.