WV Communications

WV Communications 70-01FM 70-01FD RF/IF Demodulator 70MHz 3-Module Rackmount

(No reviews yet) Write a Review
SKU:
39379
MPN:
19"
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
25.00 LBS
Shipping:
Calculated at Checkout
  • WV Communications 19-inch rackmount RF/IF demodulator chassis front panel — three plug-in modules with AC PWR ON and FAULT indicator LEDs and rack handles visible
  • WV Communications 70-01FM and 70-01FD module chassis rear panel — three IEC AC inlets, BNC connectors, DB9 connectors, and individual power switches
  • Close-up of WV Communications 70-01FM-CH plug-in module front panel — AC PWR ON green LED, FAULT red LED, FM Modulation Sensitivity Adjust knob
  • Close-up of two WV Communications 70-01FD-CH FM demodulator module front panels — AC PWR ON, FAULT, Tone Monitor BNC, FM Demod Output Level Adjust, RF Input Frequency Select showing 69.6/70.0 MHz
  • Rear panel of WV Communications 70-01FM-CH module — Tone Input BNC (J1), DB9 (J4), RF Output BNC (J2), IEC C14 AC input (J3), 115 VAC 1A fuse, AC ON/OFF switch
  • Rear panel of two WV Communications 70-01FD-CH demodulator modules — RF Input BNC (J1), DB9 (J4), Tone Output BNC (J2), IEC C14 AC input, 115 VAC 1A fuse, AC ON/OFF switches
  • Interior top-down view of WV Communications RF/IF demodulator chassis with cover removed — three plug-in modules showing PCBs, power supplies, wiring, and shielded RF subassemblies
  • Close-up of WV Communications RF/IF Demodulator internal subassembly label — P/N RF/IF-DEM-PANAM, with LO IN, RF IN, IF OUT, GND, and +12V connections
  • Close-up of WV Communications 10.7 ±0.14 MHz IF bandpass filter internal subassembly — P/N 10.7-IF-BPF-PANAM with SMA connectors
  • Close-up of WV Communications IF Amp Gain Stage internal subassembly — P/N IF-AMP-PANAM with SMA connectors and wiring harness
  • WV Communications 19" Rackmount RF IF Demodulator 3 module Chassis
$142.00
Was: $300.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

WV Communications 70-01FM 70-01FD RF/IF Demodulator 70MHz 3-Module Rackmount

This WV Communications 19" rackmount chassis houses three plug-in RF/IF processing modules: one model 70-01FM-CH FM modulator and two model 70-01FD-CH FM demodulators. Each module operates independently with its own AC power inlet, fuse, and on/off switch. The chassis provides a compact, organized rackmount platform for multi-channel IF signal processing in a standard 19" bay.

Specifications & What's Included

  • Manufacturer: WV Communications Inc.
  • Chassis: 19" rackmount, 3-slot plug-in module frame
  • Slot 1 — WV 70-01FM-CH FM Modulator Module:
    • Front panel: AC PWR ON indicator (green), FAULT indicator (red), FM Modulation Sensitivity Adjust pot
    • Rear: Tone Input BNC (J1), RF Output BNC (J2), DB9 connector (J4), IEC C14 AC inlet (J3)
  • Slots 2 & 3 — WV 70-01FD-CH FM Demodulator Modules (×2):
    • Front panel: AC PWR ON indicator (green), FAULT indicator (red), Tone Monitor BNC, FM Demod Output Level Adjust, RF Input Frequency Select window (69.6 / 70.0 MHz)
    • Rear: RF Input BNC (J1), Tone Output BNC (J2), DB9 connector (J4), IEC C14 AC inlet (J3)
  • RF Input frequency: 69.6 MHz / 70.0 MHz (selectable via front-panel frequency select)
  • Power per module: 115 VAC, 1-phase, 47–63 Hz, 1A SB fuse
  • Internal RF/IF Demodulator subassembly: P/N RF/IF-DEM-PANAM (LO IN, RF IN, IF OUT, GND, +12V)
  • Internal IF Bandpass Filter: 10.7 ±0.14 MHz, P/N 10.7-IF-BPF-PANAM
  • Internal IF Amplifier Gain Stage: P/N IF-AMP-PANAM
  • Connectors: BNC (RF and Tone I/O), DB9 (J4, each module), IEC C14 AC inlet per module
  • Includes: chassis with all 3 plug-in modules installed as shown; no additional cables or accessories

Applications

70 MHz is a standard intermediate frequency used throughout satellite communications, VSAT ground terminals, broadcast uplink/downlink chains, and point-to-point microwave links. In a typical satellite IF chain, a downconverter shifts the received L-band or C-band carrier to a 70 MHz IF, which is then passed to FM demodulator equipment like the WV 70-01FD to recover the baseband audio, data, or tone signal. The companion 70-01FM modulator performs the reverse — converting a baseband tone or audio input back to a 70 MHz FM carrier for uplink or loopback testing. The internal 10.7 MHz IF bandpass filter (10.7 ±0.14 MHz BPF) and IF amplifier gain stage are building blocks of a double-conversion receive chain common in this era of analog satellite and telecom equipment. Systems like this were widely used in broadcast relay, SCPC (single-channel-per-carrier) satellite links, and aviation/airline communications networks during the 1980s and 1990s. The modular plug-in architecture allows individual modules to be serviced or replaced without disturbing the rest of the chassis, a design approach common in professional broadcast and telecom rack systems of that period.

Condition: Used
This WV Communications 70-01FM / 70-01FD RF/IF Demodulator 3-Module Rackmount Chassis has been inspected and is in good used condition. All three plug-in modules are present — one 70-01FM-CH FM modulator and two 70-01FD-CH FM demodulators. The chassis and module faceplates show typical light wear consistent with rack service use. Please review our photos for a detailed look at the cosmetic condition, and contact us with any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
WV Communications
Model:
70-01FM / 70-01FD
MPN:
70-01FM-CH / 70-01FD-CH
Secondary Model:
RF/IF-DEM-PANAM
Type:
RF/IF FM Demodulator Plug-In Module Chassis
SKU:
39379
Number of Modules:
3 (1x 70-01FM-CH, 2x 70-01FD-CH)
IF Frequency:
70 MHz (69.6 / 70.0 MHz selectable)
IF Bandwidth:
10.7 ±0.14 MHz (internal IF BPF)
Form Factor:
19" Rackmount, 3-slot plug-in chassis
Power Requirements:
115 VAC, 1-phase, 47–63 Hz, 1A fuse per module
Connector Types:
BNC (RF/Tone I/O), DB9, IEC C14 AC inlet per module
Module 1 (Slot 1):
WV 70-01FM-CH FM Modulator — Tone In, RF Out, FM Mod Sensitivity Adj
Module 2 (Slot 2):
WV 70-01FD-CH FM Demodulator — RF In, Tone Out, Output Level Adj
Module 3 (Slot 3):
WV 70-01FD-CH FM Demodulator — RF In, Tone Out, Output Level Adj
Internal Subassembly 1:
WV RF/IF Demodulator P/N RF/IF-DEM-PANAM
Internal Subassembly 2:
WV 10.7±0.14MHz IF BPF P/N 10.7-IF-BPF-PANAM
Internal Subassembly 3:
WV IF Amp Gain Stage P/N IF-AMP-PANAM
Seller Notes:
Includes all 3 plug-in modules as shown. No additional cables or accessories.
Country/Region of Manufacture:
United States
Condition Notes:
WV Communications 70-01FM/70-01FD RF/IF Demodulator 3-Module Rackmount has been inspected and is in good used condition. All 3 plug-in modules present. Light wear from rack use. Contact us with questions.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose