Description
Uni-Solar PVL-136 Flexible Solar Panel for RV, Boat, & Camping 136w Peel n Stick. We include free MC4 Jbox set with every panel for DIY install if requested.
Uni-Solar PVL-136 136W 24-Volt Amorphous Flexible Solar Panels with Triple Junction Solar Cells Solder Points. These are top tier finished flexible solar panels. Unisolar made them this way for a specific client. These are also Grid Tie UL 1703 Listed for Systems up to 600 VDC, which means they were made to last 20 Years. See brochure.
Uni-Solar flexible solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. They are also Category 3 (130 MPH) Hurricane uplift resistant and installed with no hardware. Each solar cell is connected to each other via bypass diodes. Therefore, if one solar cell is shaded or soiled, only the power output of this one shaded solar cell is lost - usually less than 4.5%.These flexible solar panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications.
The following are basic specs for individual Uni-Solar PVL-136 136 W Flexible Solar Panel for RV, Boat, & Camping,
- Maximum Power (Pmax): 136 Watts
- Nominal Operating Voltage: 24 Volts
- Max Power Voltage (Vmpp): 33 Volts
- Max Power Current (Impp): 4.1 Amps
- Open Circuit Voltage (Voc): 46.2 Volts
- Short Circuit Current (Isc): 5.1 Amps
- Max System Voltage: 600 Volts
- Lightweight & Flexible
- Bypass Diodes at each solar cell connection
- Category 3 (130 MPH) Hurricane uplift resistant when installed in accordance with guidelines.
- Virtually Unbreakable (No Glass)
- Shadow & High Heat Tolerant
- Cells Per Module: 22
- Frame Material: Frameless
- None: Solder Points on bottom of panel
- Bonding adhesive factory-installed on the back of the laminate
- Panel Weight: 16 Pounds
- Panel Dimensions:216" (18 Feet) x 15 3/8"
- Uni-Solar flexible solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. Each solar cell is connected to each other via bypass diodes. Therefore, if one solar cell is shaded or soiled, only the power output of this one shaded solar cell is lost - usually less than 4.5%. These flexible solar panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications.
Condition: New
New Open Box. This Uni-Solar PVL-136 Flexible Solar Panel for RV, Boat, & Camping has bottom-facing solder points for connections down through a roof. We include a DIY Junction Box with MC4 Connectors with every flexible solar panel sold, but other components may be needed depending on the desired setup, such as short wires to connect the solder points to the j-box, and/or a sealant to connect the j-box securely to the panel. It is 18 feet long by 15.5 inches wide. Please view our photo set and contact us if you have any questions.
