Printers

Printers

  • Oakleaf P-400 Dot Matrix Printer 9-Pin Impact Printer Parallel

    Oakleaf P-400 Dot Matrix Printer 9-Pin Impact Printer Parallel

    Oakleaf

    $100.00
    Was: $200.00
    Oakleaf P-400 Dot Matrix Printer 9-Pin Impact Printer ParallelThe Oakleaf P-400 is a 9-pin dot matrix impact printer designed for reliable, economical printing of forms, invoices, and multi-part...
    19597
    SKU:
    19597
    Availability:
    Local pickup only. Please contact us before purchasing to confirm availability and arrange pickup details.
    Weight:
    37.00 LBS
    Brand:
    Oakleaf
    Model:
    P-400
    Type:
    9-Pin Dot Matrix Impact Printer
    Interface Type:
    Parallel (Centronics)
    Print Head Type:
    9-Pin Impact Matrix
    Form Factor:
    Desktop / Benchtop
    Power Requirements:
    AC 110-120V or 220-240V (verify with seller)
    Seller Notes:
    Tested printing functionality. No toner, ink, ribbon, or media included.
    SKU:
    19597
    Condition:
    Used – Tested, Pulled from Working Environment
    Condition Notes:
    Oakleaf P-400 Dot Matrix Printer has been tested and verified to pass copies in good working order. Unit is in used condition and was pulled from a working environment. Local pickup only; not available for shipping due to fragility.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $100.00
    Was: $200.00
  • Tektronix Phaser IIsd 4684 color thermal wax transfer printer – front right three-quarter view showing paper output tray and power switch Tektronix Phaser IIsd 4684 – rear panel view showing upper interface section and lower power/rating label area

    Tektronix Phaser IIsd 4684 Color Thermal Wax Transfer Printer RS-232 Ethernet

    Tektronix

    $100.00
    Was: $200.00
    Tektronix Phaser IIsd 4684 Color Thermal Wax Transfer Printer RS-232 EthernetDesktop color thermal wax transfer printer from Tektronix. Uses color transfer roll media to produce color prints via...
    19691
    SKU:
    19691
    Availability:
    This item requires special shipping — please contact us for a freight quote or to arrange local pickup.
    Weight:
    85.00 LBS
    Brand:
    Tektronix
    Model:
    Phaser IIsd
    MPN:
    4684
    Type:
    Color Thermal Wax Transfer Printer
    SKU:
    19691
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    No toner, ink, ribbon, or media included. Sold AS-IS — powers on only.
    Country/Region of Manufacture:
    United States
    Form Factor:
    Desktop
    Print Technology:
    Thermal Wax Transfer (Color Transfer Roll)
    Color Printing:
    Yes
    Interface:
    RS-232 (Serial), LocalTalk, Ethernet, Parallel, SCSI Disk
    Connectivity:
    RS-232, LocalTalk, Ethernet, Parallel, SCSI
    Serial Interface:
    RS-232 (DB-25)
    Network Interface:
    Ethernet (DB-15), LocalTalk (mini-DIN)
    Additional Interfaces:
    Parallel (Centronics 36-pin), SCSI Disk (Centronics 50-pin)
    Ethernet Status:
    Ethernet port present; address label reads 'Not Installed'
    Front Panel Indicators:
    Power, Ready, Error, Jam, Paper, Transfer Roll, Cover
    Dimensions:
    24" W x 20" D x 18" H (approx.)
    Compatible Media:
    Color Transfer Rolls (no consumables included)
    Power Requirements:
    120V AC (visible IEC inlet on rear)
    Condition Notes:
    Tektronix Phaser IIsd 4684 Color Printer powers on but has not been tested further. Sold AS-IS for parts or repair — no functionality guarantee. No consumables included. Special shipping required — contact us for a quote.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $100.00
    Was: $200.00
  • NEC P5200 Dot Matrix Printer Printhead Impact Print Head

    NEC P5200 Dot Matrix Printer Printhead Impact Print Head

    NEC

    $45.00
    Was: $90.00
    NEC P5200 Dot Matrix Printer Printhead Impact Print HeadThe NEC P5200 printhead is an impact printing component designed for NEC's P5200 series dot matrix printers. This type of printhead uses...
    34770
    SKU:
    34770
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    NEC
    Model:
    P5200
    Type:
    Dot Matrix Printer Printhead
    SKU:
    34770
    Printer Type:
    Dot Matrix / Impact
    Condition:
    Used
    Country/Region of Manufacture:
    Japan
    Condition Notes:
    NEC P5200 dot matrix printhead in used condition, pulled from working environment. Verify compatibility before purchase. Contact us for details.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $45.00
    Was: $90.00
  • Unisys NIP 2-PTR laser printer – right-side three-quarter front view showing paper tray, front panel LCD, and output slot Unisys NIP 2-PTR laser printer – rear three-quarter view showing ventilation, rear panel, and interface port area

    Unisys NIP 2-PTR Laser Printer 1991 115-120V Parallel For Parts 23x18x14

    Unisys

    $150.00
    Was: $300.00
    Unisys NIP 2-PTR Laser Printer 1991 115-120V Parallel For Parts 23x18x14Desktop laser printer manufactured by Unisys in March 1991. Features dual parallel (Centronics) connectivity for connection to...
    8570
    SKU:
    8570
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    124.00 LBS
    Brand:
    Unisys
    Model:
    NIP 2-PTR
    MPN:
    3789 3504
    Type:
    Laser Printer
    SKU:
    8570
    Condition:
    As-Is / For Parts or Not Working
    Power Requirements:
    115-120V, 50-60Hz, 800W / 8.0A
    Voltage:
    115-120V AC
    Amperage:
    8.0A
    Wattage:
    800W
    Frequency:
    50-60Hz
    Interface / Connectivity:
    Dual Parallel (Centronics)
    Connector Type:
    Parallel (Centronics), x2
    Form Factor:
    Desktop
    Dimensions:
    23" x 18" x 14"
    Manufacture Date:
    March 1991
    FCC ID:
    C9SDP020A3
    Country/Region of Manufacture:
    Japan
    UL Listing:
    Listed E.D.P. 230T — Office Appliance/Electronic
    Serial Number:
    See internal fields
    Seller Notes:
    Sold AS-IS for parts or repair. No toner or media included.
    Condition Notes:
    Unisys NIP 2-PTR laser printer sold AS-IS for parts or repair. Not tested; no functionality guaranteed. No toner or media included. Typical age-related cosmetic wear. Please contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00
  • HP Hewlett-Packard C2354A 2300 Line Printer cabinet – front left angle view showing white floor-standing enclosure HP C2354A 2300 Line Printer – front right angle view showing paper feed slot, operator panel area, and cabinet on casters

    HP Hewlett-Packard C2354A 2300 Line Printer 840 LPM HPIB Cabinet For Parts

    HP

    $200.00
    Was: $400.00
    HP Hewlett-Packard C2354A 2300 Line Printer 840 LPM HPIB Cabinet For PartsThe HP C2354A is a floor-standing cabinet line printer from HP's 2300 series, rated at 840 lines per minute. It uses an...
    11408
    SKU:
    11408
    Availability:
    Freight shipping required — contact us for a quote or to arrange local pickup.
    Weight:
    200.00 LBS
    Brand:
    HP
    Model:
    C2354A
    MPN:
    C2354A
    Type:
    Line Printer
    SKU:
    11408
    Series:
    HP 2300
    Print Speed:
    840 Lines Per Minute (840 LPM)
    Interface:
    HPIB-IF (HP-IB / IEEE-488)
    Voltage Settings:
    4 selectable voltage settings
    Form Factor:
    Floor-Standing Cabinet
    Dimensions:
    18" W x 24" D x 39" H
    Print Technology:
    Line Matrix / Band Printer
    Condition:
    As-Is / For Parts or Not Working
    Options:
    1CW ABA
    Seller Notes:
    No display panel. Prints 6 lines then paper jam error. Line Feed button broken. No ribbon/media included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    HP C2354A 2300 Line Printer sold as-is for parts/repair. Prints ~6 lines then stops with paper jam error. Line Feed button broken. Front display panel missing. Additional unknown issues possible. No ribbon/media included. Freight ship required.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $200.00
    Was: $400.00
  • DH Print 546 Cypher IV thermal label printer – front-left three-quarter view showing label output slot and top panel with indicator LEDs DH Print 546 Cypher IV thermal label printer – rear panel showing ventilation slots, DIP switch bank, RS-232C serial connector, and power switch

    DH Print 546 Cypher IV Thermal Label Printer RS-232 Serial ROHM KF1504-AA

    DH Print

    $45.00
    Was: $90.00
    DH Print 546 Cypher IV Thermal Label Printer RS-232 Serial ROHM KF1504-AAThe DH Print 546 Cypher IV is a desktop thermal label printer manufactured in the United States and dated April 1990. It uses...
    12144
    SKU:
    12144
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    32.00 LBS
    Brand:
    DH Print
    Model:
    546
    MPN:
    546 S12000-086
    Secondary Model:
    Cypher IV
    Type:
    Thermal Label Printer
    SKU:
    12144
    Condition:
    As-Is / For Parts or Not Working
    Print Head:
    ROHM KF1504-AA
    Interface:
    RS-232C Serial
    Baud Rate:
    300, 600, 1200, 2400, 4800, 9600, 19.2K
    Print Modes:
    Strip Mode, Batch Mode, Batch Rewind
    Front Panel Controls:
    Power, Ready, Strip Mode LEDs; Label Advance button
    Revision:
    Rev A00
    Date Code:
    0490 (April 1990)
    Country/Region of Manufacture:
    United States
    Form Factor:
    Desktop
    Seller Notes:
    Sold as-is for parts or repair. Untested. Unit may vary from photo.
    Condition Notes:
    DH Print 546 Cypher IV thermal label printer sold as-is for parts or repair. Untested — no functionality guaranteed. May be incomplete. Unit received may vary from photo. Please contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $45.00
    Was: $90.00
  • JDL 950TH Omniplotter 950 wide format plotter – right-side view, lid closed, roll paper loaded at front JDL 950TH Omniplotter 950 – top lid open showing pen carriage rail and multiple color ribbon pens installed

    JDL 950TH Omniplotter 950 Wide Format Plotter 23" Color Ribbon Japan Digital Lab

    JDL

    $120.00
    Was: $250.00
    JDL 950TH Omniplotter 950 Wide Format Plotter 23" Color Ribbon Japan Digital LabThis is a wide-format dot matrix plotter manufactured by Japan Digital Laboratory in 1990. It accepts 23-inch roll...
    12445
    SKU:
    12445
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    155.00 LBS
    Brand:
    JDL (Japan Digital Laboratory)
    Model:
    950TH
    MPN:
    950TH
    Secondary Model:
    JDL-950
    Type:
    Wide Format Dot Matrix Plotter
    SKU:
    12445
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Includes color ribbon. Sold as-is for parts or repair.
    Country/Region of Manufacture:
    Japan
    Power Requirements:
    AC 115V, 3A, 50/60Hz
    Paper Width:
    23 inches
    Print Technology:
    Dot Matrix / Pen Plotter
    Color:
    Color (Color Ribbon)
    Memory:
    2MB
    Interface Type:
    Parallel (Centronics), Serial
    Form Factor:
    Desktop / Tabletop
    Date of Manufacture:
    March 1990
    Connectivity:
    Computer, Feed-D, Terminal, Controller ports
    Front Panel Controls:
    LCD display; FONT, TOF, MICRO-ADJUST, PLOT/PRINT, MENU, NEXT, ENTER, REGISTER, FORM FEED, LINE FEED, READY/PAUSE
    Compatible With:
    CAD/CAM drafting systems, legacy workstations
    Media Type:
    Roll paper, 23" wide
    Condition Notes:
    JDL 950TH Omniplotter 950 wide format plotter sold as-is for parts or repair. Functionality not confirmed. Cosmetically shows light age-related yellowing and minor wear. Color ribbon included. Not guaranteed working.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $120.00
    Was: $250.00
  • HP Hewlett Packard 78101A Telemetry System Receiver front panel with power indicator lit, CAL button, INOPERATIVE/ELECTRODE/RANGE/BATTERY indicators, and whip antenna on top HP 80240A Telemetry System Receiver top view showing mounted whip antenna and partial label on right side

    HP Hewlett Packard 80240A 78101A Telemetry System Receiver 115-230V ECG

    Hewlett Packard

    $100.00
    Was: $200.00
    HP Hewlett Packard 80240A 78101A Telemetry System Receiver 115-230V ECGBiomedical telemetry system receiver designed for patient ECG monitoring. This benchtop unit receives wireless ECG signals from...
    14594
    SKU:
    14594
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    10.00 LBS
    Brand:
    HP
    Model:
    80240A
    MPN:
    78101A
    Secondary Model:
    78101A
    SKU:
    14594
    Type:
    Biomedical Telemetry System Receiver
    Condition:
    As-Is / For Parts or Not Working
    System Configuration - Transmitter:
    80140A
    System Configuration - Receiver:
    78101A
    System Configuration - Transmitter Module:
    78120A
    System Configuration - Receiver Interface:
    80140-60001
    Power Requirements:
    115-230V AC, 50-60Hz
    Output Type:
    ECG Output
    Antenna:
    Included
    Country/Region of Manufacture:
    Germany
    Form Factor:
    Benchtop
    Application:
    Patient ECG Telemetry Monitoring
    Seller Notes:
    Sold AS-IS for parts or repair; includes antenna. System SN 2623G08172.
    Condition Notes:
    HP 80240A 78101A Telemetry System Receiver sold AS-IS for parts or repair. Not tested or guaranteed functional. Unit appears physically intact with normal age wear; antenna present. May yield useful parts.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $100.00
    Was: $200.00
  • Esselte Meto Atlas AS40 industrial thermal label printer — front and left-side view showing steel enclosure and label exit slot Esselte Meto Atlas AS40 thermal label printer — right-side view with external control panel arm and label dispenser extended

    Esselte Meto Atlas AS40 Advanced Thermal Label Printer Industrial For Parts

    Esselte Meto

    $100.00
    Was: $200.00
    Esselte Meto Atlas AS40 Advanced Thermal Label Printer Industrial For PartsIndustrial-grade thermal label printer from the Atlas Advanced product line. Desktop freestanding unit designed for...
    24359
    SKU:
    24359
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    57.00 LBS
    Brand:
    Esselte Meto
    Model:
    AS40
    MPN:
    AS40
    Type:
    Industrial Thermal Label Printer
    SKU:
    24359
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold for parts or repair. Includes detachable external control panel.
    Product Line:
    Atlas Advanced
    Form Factor:
    Freestanding / Desktop Industrial
    Print Technology:
    Thermal
    Interface:
    Parallel (Centronics), Serial (DB9) — visible on rear panel
    Display:
    LCD with backlight
    Control Panel:
    External detachable — Esc, Menu, Test, Feed, Stop keys
    Construction:
    Heavy-duty steel enclosure
    Country/Region of Manufacture:
    Germany
    Condition Notes:
    Esselte Meto Atlas AS40 thermal label printer sold as-is for parts or repair. Not tested or guaranteed functional. Includes detachable control panel and label dispenser arm. Surface wear from industrial use. View photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $100.00
    Was: $200.00
  • Accton EN2010 EtherRepeater-II front panel showing AUI ports, LED indicators, and segment labeling Accton EN2010 EtherRepeater-II rear panel showing IEC AC power inlet and power switch

    Accton EN2010 EtherRepeater-II 10Base-T Ethernet Repeater Hub AUI BNC 2-Segment

    Accton

    $35.00
    Was: $70.00
    Accton EN2010 EtherRepeater-II 10Base-T Ethernet Repeater Hub AUI BNC 2-Segment10Base-T Ethernet repeater hub designed to extend network segments across two ports. Functions as an unmanaged repeater...
    24605
    SKU:
    24605
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    10.00 LBS
    Brand:
    Accton
    Model:
    EN2010
    MPN:
    EN2010
    Type:
    10Base-T Ethernet Repeater Hub
    SKU:
    24605
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold as-is for parts or repair. No functionality guarantee.
    Country/Region of Manufacture:
    Taiwan
    Form Factor:
    Rackmount / Desktop, 1U
    Number of Segments:
    2
    Interface Type:
    AUI, BNC (10Base2), 10Base-T
    Network Standard:
    10Base-T, 10Base2 (Coax), IEEE 802.3
    Data Rate:
    10 Mbps
    Connector Type:
    AUI (DB15), BNC, IEC AC inlet
    LED Indicators:
    TX, COL, RX per segment; PWR, Jabber, Fault, Partition
    Management Type:
    Unmanaged
    Compatible With:
    10Base-T Ethernet networks, IEEE 802.3 equipment
    Condition Notes:
    Accton EN2010 EtherRepeater-II sold as-is for parts or repair. Not tested, no functionality guaranteed. Chassis intact; sold in current condition. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • Yokogawa YEW 3033 X-Y Analog Recorder Plotter – front view showing large chart surface in worn, soiled condition with control panel at bottom Yokogawa 3033 X-Y Recorder – rear panel view showing D-sub connector and overall enclosure in dark gray finish

    Yokogawa 3033 X-Y Analog Recorder Plotter YEW Vintage For Parts Repair

    Yokogawa

    $110.00
    Was: $225.00
    Yokogawa 3033 X-Y Analog Recorder Plotter YEW Vintage For Parts RepairBenchtop X-Y analog recorder plotter manufactured by Yokogawa Electric Works. Records data on chart paper using pen drive...
    24785
    SKU:
    24785
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    45.00 LBS
    Brand:
    Yokogawa
    Model:
    3033
    MPN:
    3033
    Type:
    X-Y Analog Recorder Plotter
    SKU:
    24785
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Powers on and lights up. Poor physical condition. Includes instruction manual.
    Country/Region of Manufacture:
    Japan
    Form Factor:
    Benchtop / Wall-Mountable
    Mounting:
    Flat or vertical
    Recording Type:
    X-Y Analog
    Drive Mechanism:
    Pen / DC Amplifier
    Input Channels:
    2 (X and Y1 axes)
    Input Range:
    mV/cm (vernier adjustable)
    Filter:
    On/Off switchable per channel
    Time Base:
    Sweep rate adjustable (0.25–10 s/cm)
    Controls:
    Offset, Position, Range/Vernier, Filter, Sweep, Chart Hold, Pen Down
    Rear Interface:
    D-sub connector (visible on rear panel)
    Includes:
    Instruction Manual
    Compatible With:
    Standard chart paper for Yokogawa 3033 series
    Series:
    YEW (Yokogawa Electric Works)
    Condition Notes:
    Yokogawa 3033 X-Y Analog Recorder Plotter powers on and light illuminates but is in poor physical condition. Sold as-is for parts or repair only — no functionality guaranteed. Includes instruction manual.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $110.00
    Was: $225.00
  • Semtek 3913 magnetic IC card reader front view showing black housing and card insertion slot with mounting bracket Semtek 3913 card reader rear view showing 20-pin header connector and Semtek P/N 3913 label with serial number

    Semtek 3913 Magnetic IC Card Reader RS-232 20-Pin ISO-7816 Credit Debit Serial

    Semtek

    $25.00
    Was: $50.00
    Semtek 3913 Magnetic IC Card Reader RS-232 20-Pin ISO-7816 Credit Debit SerialManual insert magnetic and IC card reader with RS-232 serial interface. Reads magnetic stripe cards (1, 2, or 3 tracks)...
    26495
    SKU:
    26495
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    0.95 LBS
    Application Guide:
    Semtek 3913 SP1 Application Guide
    Brand:
    Semtek
    Model:
    3913
    MPN:
    3913
    Type:
    Manual Insert Magnetic & IC Card Reader
    SKU:
    26495
    Series:
    Series 3900
    Specification No.:
    91029003
    Card Standard:
    ISO-7810, ISO-7811, ISO-7812, ISO-7816
    Magnetic Recording Method:
    F2F (FM)
    Recording Density:
    ISO 1–1/2/3 tracks
    Recording Capacity:
    40 characters (5-bit)
    Card Thickness:
    0.76 ± 0.08mm
    Interface Type:
    RS-232 Serial, 20-Pin
    Connector Type:
    20-Pin Header
    IC Contact Pins:
    8-pin IC contact (ISO-7816)
    Supplying Voltage:
    +5VDC ±5%
    Power Consumption:
    1.5mA standby, 6mA reading
    Ripple:
    100mA p-p
    IC Contact Resistance:
    0.5 ohm max.
    Card Feeding Speed:
    10–150 cm/sec
    Head Lifetime:
    400,000 round trips
    IC Contact Lifetime:
    700,000 contacts
    Card Insert Lifetime:
    500,000 card inserts minimum
    Permissible Card Warp:
    3mm max.
    Operating Temperature:
    -10 to 50°C, 20–90% RH
    Storage Temperature:
    -30 to 70°C, less than 95% RH
    Vibration:
    Amplitude 2mm, 10–50Hz, X/Y/Z
    Shock:
    Up to 30G, 11ms
    Output High Level:
    3.5V (Ioh=6mA)
    Output Low Level:
    0.4V (Iol=6mA)
    Power Source:
    Port Powered (bus powered)
    LED Indicator:
    Green LED — Power and Read status
    Card Type Support:
    Credit, Debit, Prepaid IC card
    Hi-Co / Lo-Co Support:
    Yes — reads Hi-Co and Lo-Co
    Tracks Supported:
    1, 2, or 3 tracks
    Insertion Type:
    Manual Insert / Manual Extract
    Bezel Color:
    Black
    Mounting:
    Bracket mount (zinc-plated bracket included)
    Condition:
    New
    Seller Notes:
    New in box, in original anti-static bag with mounting bracket
    Country/Region of Manufacture:
    Japan
    Condition Notes:
    Semtek 3913 Magnetic IC Card Reader — new in box, sealed in original anti-static bag. Surplus/old stock; may have been stored for an extended period. Unused. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $25.00
    Was: $50.00
  • Research Inc 8300890 Thermal Printer Module – front view showing blue steel enclosure with thermal paper roll and two red push buttons Research Inc 8300890 Thermal Printer Module – rear and top view showing 25-pin DB25 serial connector, green PCB, and IEC AC power inlet

    Research Inc 8300890 Thermal Printer Module 25-Pin Serial 115/230VAC KD61270-001

    Research Inc

    $35.00
    Was: $70.00
    Research Inc 8300890 Thermal Printer Module 25-Pin Serial 115/230VAC KD61270-001Thermal printer module designed for serial communication in industrial and telecom equipment. Accepts 25-pin DB25...
    26694
    SKU:
    26694
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    8.00 LBS
    Brand:
    Research Inc
    Model:
    8300890
    MPN:
    8300890
    Secondary Model:
    KD61270-001
    Type:
    Thermal Printer Module
    SKU:
    26694
    Interface Type:
    25-Pin Serial (DB25)
    Connector Type:
    25-Pin DB25 Serial Input
    Power Requirements:
    115/230 VAC, 50-60 Hz
    Fuse Rating:
    115V: 1/4A; 230V: 1/8A
    Line Select:
    115V / 230V switchable
    Form Factor:
    Benchtop / Enclosed Module
    Enclosure:
    Blue powder-coated steel enclosure
    Paper Type:
    Thermal roll paper
    Assembly Number:
    KD61270-001
    Country/Region of Manufacture:
    United States
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold as-is for parts or repair. Paper roll visible. No functionality guarantee.
    Condition Notes:
    Research Inc 8300890 Thermal Printer Module sold as-is for parts or repair. Not tested, no functionality guaranteed. Enclosure intact, paper roll present, rear panel and connectors appear complete. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • TTC PR-2000 Fireberd Thermal Printer front panel view showing paper slot, TTC logo, and power switch TTC PR-2000 1170-2800 Fireberd Thermal Printer rear view showing D-Sub 25-pin connector and power cord

    TTC PR-2000 1170-2800 Fireberd Thermal Printer 115V/230V D-Sub For Parts

    Telecommunications Techniques Corporation

    $35.00
    Was: $70.00
    TTC PR-2000 1170-2800 Fireberd Thermal Printer 115V/230V D-Sub For PartsThe TTC PR-2000 is a compact thermal printer produced by Telecommunications Techniques Corporation (TTC) and designed as a...
    29815
    SKU:
    29815
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    6.00 LBS
    Brand:
    Telecommunications Techniques Corporation (TTC)
    Model:
    PR-2000
    MPN:
    1170-2800
    SKU:
    29815
    Type:
    Thermal Printer
    Compatible With:
    TTC Fireberd Series Test Sets
    Power Requirements:
    115V 1/2A Slow Fuse / 230V 1/4A Slow Fuse
    Connector Type:
    D-Sub (25-pin)
    Form Factor:
    Benchtop / Compact
    Country/Region of Manufacture:
    United States
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Powers on; paper feed and test functions non-operational. Sold AS-IS.
    Condition Notes:
    TTC PR-2000 (1170-2800) Fireberd Thermal Printer powers on but will not feed paper or run tests. Sold AS-IS for parts or repair only. Not guaranteed functional. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • Eltron Privilege S.A. ID card printer front-left view showing dark gray enclosure and EII logo badge Eltron Privilege S.A. card printer rear view showing parallel interface connector, IEC power inlet, and rating label

    Eltron Privilege S.A. ID Card Printer CF-02389 110/240V Parallel For Parts

    Eltron

    $75.00
    Was: $150.00
    Eltron Privilege S.A. ID Card Printer CF-02389 110/240V Parallel For PartsThe Eltron Privilege S.A. is a desktop dye-sublimation and thermal-transfer ID card printer designed to produce full-color or...
    32391
    SKU:
    32391
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    21.00 LBS
    Brand:
    Eltron
    Model:
    Privilege S.A.
    MPN:
    CF-02389
    SKU:
    32391
    Type:
    ID Card / Plastic Card Printer
    Condition:
    As-Is / For Parts or Not Working
    Power Requirements:
    110/240V AC, 50-60 Hz
    Interface:
    Parallel (DB25-style connector)
    Form Factor:
    Desktop
    Country/Region of Manufacture:
    E.E.C. (European Economic Community)
    Serial Number Range / Date Code:
    CF-02389, 01/96
    Seller Notes:
    Sold as-is for parts/repair; ribbon included, untested
    Compatible With:
    Standard CR-80 plastic/PVC ID cards
    Print Technology:
    Dye sublimation / thermal transfer (card printer)
    Condition Notes:
    Eltron Privilege S.A. ID card printer CF-02389 is untested and sold as-is for parts or repair. Ribbon included. Interior mechanism appears intact. No functionality guaranteed. 01/96 manufacture date.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • Tektronix Phaser 440 Model 4685 color thermal transfer printer front right view with lower paper tray installed Tektronix Phaser 440 4685 rear panel view showing interface ports and power cord connected

    Tektronix Phaser 440 4685 Color Thermal Transfer Printer SCSI Parallel Serial

    Tektronix

    $99.00
    Was: $200.00
    Tektronix Phaser 440 4685 Color Thermal Transfer Printer SCSI Parallel SerialDesktop color thermal transfer printer from the 1990s. Supports SCSI, Parallel, Serial (RS-232), and LocalTalk...
    33632
    SKU:
    33632
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    75.00 LBS
    Brand:
    Tektronix
    Model:
    Phaser 440
    MPN:
    4685
    Type:
    Color Thermal Transfer Printer
    SKU:
    33632
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold as-is for parts or repair. Powers on; printing roller melts ribbon.
    Country/Region of Manufacture:
    Japan
    Form Factor:
    Desktop
    Power Requirements:
    115/230V AC, 50-60Hz (selector switchable)
    Current Rating:
    115V: 5.7A; 220V: 3.5A
    Interface:
    SCSI, Parallel, Serial (RS-232), LocalTalk
    Connectivity:
    SCSI Disk, Parallel, LocalTalk, Serial RS-232
    Network Interface:
    Ethernet (not installed on this unit)
    Print Technology:
    Thermal Transfer / Solid Ink
    Color Output:
    Yes
    Media Supported:
    Letter, A4, Letter Extra (per label)
    Status Indicators:
    Error, Jam, Media, Ribbon, Cover, Ready, Power
    Dimensions:
    18.75" x 13.25" x 15"
    Compatible With:
    Mac (LocalTalk/SCSI), PC (Parallel/Serial), SCSI hosts
    Certifications:
    UL (E145607), TUV GS, FCC Part 15, CSA LR23200
    Condition Notes:
    Tektronix Phaser 440 (4685) powers on but printing roller melts thermal transfer ribbon. Sold strictly as-is for parts or repair — not functional. No warranty. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $99.00
    Was: $200.00
  • Epson Stylus Photo 1200 P113A wide carriage inkjet printer – front view with top cover open showing printhead carriage and paper guides Epson Stylus Photo 1200 P113A wide carriage inkjet printer – left rear three-quarter view with power cord visible

    Epson Stylus Photo 1200 P113A Wide Carriage Inkjet Printer USB Parallel Serial

    Epson

    $35.00
    Was: $70.00
    Epson Stylus Photo 1200 P113A Wide Carriage Inkjet Printer USB Parallel SerialWide carriage desktop inkjet printer manufactured by Epson. Designed for photo and document printing with support for...
    33753
    SKU:
    33753
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    19.00 LBS
    Brand:
    Epson
    Model:
    Stylus Photo 1200
    MPN:
    P113A
    SKU:
    33753
    Type:
    Wide Carriage Inkjet Printer
    Condition:
    As-Is / For Parts or Not Working
    Power Requirements:
    120V AC, 50-60Hz, 0.4A
    Interface:
    USB, Parallel (Centronics), Serial
    Form Factor:
    Desktop
    Print Technology:
    Inkjet
    Carriage Width:
    Wide Carriage
    Connectivity:
    USB Type-B, Parallel, Serial (Mini-DIN)
    Country/Region of Manufacture:
    Japan
    FCC ID:
    BKMFB P113A
    Certifications:
    UL Listed UL1950, CSA LR102293
    Seller Notes:
    Sold AS-IS for parts or repair. No ink, toner, or media included.
    Condition Notes:
    Epson Stylus Photo 1200 P113A wide carriage inkjet printer sold AS-IS for parts or repair. Not tested, no functionality guarantee. No ink or media included. Housing intact. Please contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • Burnett Bros Engineering industrial label applicator front-left view showing blue cast housing, roller mechanism, and power cord with plug Burnett Bros Engineering industrial label applicator rear-right view showing vented blue housing and power cord routing

    Burnett Bros Engineering Industrial Label Applicator 115V 1PH 60Hz For Parts

    Burnett Bros

    $250.00
    Was: $500.00
    Burnett Bros Engineering Industrial Label Applicator 115V 1PH 60Hz For PartsBenchtop label applicator manufactured by Burnett Bros Engineering in Anaheim, California. Designed for automated label...
    35750
    SKU:
    35750
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    95.00 LBS
    Brand:
    Burnett Bros Engineering
    Model:
    Industrial Label Applicator
    MPN:
    Industrial Label Applicator
    Type:
    Industrial Label Applicator
    SKU:
    35750
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold as-is for parts or repair; powers on only
    Country/Region of Manufacture:
    United States
    Power Requirements:
    115V AC, 1-Phase, 60Hz
    Voltage:
    115V AC
    Phase:
    Single Phase (1PH)
    Frequency:
    60Hz
    Current Rating:
    3 Amps
    Date of Manufacture:
    5/84 (May 1984)
    Form Factor:
    Benchtop / Tabletop
    Dimensions:
    18" x 14" x 13"
    Application:
    Industrial label applying / processing equipment
    Manufacturer Location:
    Anaheim, California, USA
    Condition Notes:
    Burnett Bros Engineering industrial label applicator sold as-is for parts or repair. Powers on only — not fully tested. Housing shows wear, chips, and oxidation. Roller assembly and feed trough intact. No functionality guarantee. May 1984.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $250.00
    Was: $500.00
  • Seiko Instruments LTP5446B-C832 thermal printer mechanism — top view showing print head assembly, motor, PCB, and wiring harness Seiko Instruments LTP5446B-C832 thermal printer mechanism — side view showing flat flex ribbon cable, wiring harness, and metal frame

    Seiko Instruments LTP5446B-C832 Thermal Printer Mechanism 12V 112mm Curved Path

    Seiko Instruments

    $90.00
    Was: $250.00
    Seiko Instruments LTP5446B-C832 Thermal Printer Mechanism 12V 112mm Curved PathThermal printer mechanism and printhead assembly designed for portable thermal printing applications. The unit operates...
    39952
    SKU:
    39952
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    2.00 LBS
    Brand:
    Seiko Instruments
    Model:
    LTP5446B-C832
    MPN:
    LTP5446B-C832
    Type:
    Thermal Printer Mechanism
    SKU:
    39952
    Voltage:
    12V
    Print Width:
    112mm
    Paper Path:
    Curved
    Interface:
    Ribbon/Flat Flex Cable Connector
    Seller Notes:
    New/open box printhead pulled from a new, unused portable printer.
    Country/Region of Manufacture:
    Japan
    Compatible With:
    Seiko Instruments portable thermal printers
    Form Factor:
    Mechanism / Component
    Power Requirements:
    12V DC
    Condition Notes:
    Seiko Instruments LTP5446B-C832 Thermal Printer Mechanism — new/open box, pulled from a new, unused portable printer. Never installed or operated. No wear. Original packaging may not be included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $90.00
    Was: $250.00
  • ExpoMobile Posh MR3 magnetic smart card reader decoder – front/side view showing card swipe slot and attached mini-DIN cable ExpoMobile Posh MR3 card reader – opposite side view showing velcro mounting strip and mini-DIN cable connector

    ExpoMobile Posh MR3 Magnetic Smart Card Reader Decoder Registration Control

    Posh

    $15.00
    Was: $30.00
    ExpoMobile Posh MR3 Magnetic Smart Card Reader Decoder Registration ControlProgrammable magnetic stripe and smart card reader designed for event registration and badge control applications. Connects...
    40044
    SKU:
    40044
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    0.95 LBS
    Brand:
    ExpoMobile
    Model:
    MR3
    MPN:
    Posh MR3
    Type:
    Programmable Magnetic & Smart Card Reader/Decoder
    SKU:
    40044
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold as-is. Unable to test. Includes attached mini-DIN cable.
    Interface:
    Mini-DIN (PS/2-style) connector
    Connector Type:
    8-pin Mini-DIN
    Card Type Supported:
    Magnetic Stripe, Smart Card
    Application:
    Event Registration / Badge Control
    Form Factor:
    Handheld / Desktop
    Country/Region of Manufacture:
    Unknown
    Condition Notes:
    ExpoMobile Posh MR3 Magnetic Smart Card Reader sold as-is for parts or repair. Unable to test — no functionality guaranteed. Shows general surface wear. Mini-DIN cable attached.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $15.00
    Was: $30.00