Pitney Bowes

Pitney Bowes DM800 DJB0 Digital Mailing System No IntelliLink For Parts

(No reviews yet) Write a Review
SKU:
48667
MPN:
DM800
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
151.00 LBS
Shipping:
Calculated at Checkout
  • Pitney Bowes DM800 digital mailing system full length view from above-left on two red freight dollies showing complete inline feeder and transport assembly
  • Pitney Bowes DM800 digital mailing system full length right-side view on freight dollies showing stacker output end and transport housing
  • Pitney Bowes DM800 model label showing Model No. DM800, PCN DJB0, assembled in USA — Stamford CT
  • Pitney Bowes DM800 model label showing Model No. DM800, PCN DJF0, Serial 0002550, 100-240Vac 50/60Hz 5.0A Max, CE and UL Listed markings
  • Pitney Bowes DM800 feeder section with stainless steel feed deck open, showing envelope feed guides and caution label
  • Pitney Bowes DM800 ink and transport area close-up showing blue ink cartridge cap and feeder transport junction
  • Pitney Bowes DM800 print module bay open showing ink cartridge installed with blue cap, print head carriage assembly, and caution label
  • Pitney Bowes DM800 internal transport drive roller assembly with white label reading Reconditioned Part visible on roller component
  • Pitney Bowes DM800 internal print and transport mechanism with drive rollers, springs, and Reconditioned Part label — cover open
  • Pitney Bowes DM800 internal cracked ribbon cable visible running along lower transport section between housing panels
  • Pitney Bowes DM800 interior overview with cover open showing tape loading bay with tape roll, print head assembly, and transport roller deck
  • Pitney Bowes DJW1 module label showing Model No. DJW1, PCN DJW3, Serial 0004005, RoHS mark, assembled in USA
  • Pitney Bowes DM800 transport roller deck close-up with four roller assemblies and stainless steel feed tray visible, cover raised
  • Pitney Bowes DM800 tape loading bay with white tape roll installed and Load Tape Here label visible
  • Pitney Bowes DM800 empty IntelliLink Control Center mounting bay showing exposed parallel interface port connector with no module installed
  • Pitney Bowes DM800 print module section open showing teal/green Pitney Bowes ink cartridge installed in cartridge bay
  • Pitney Bowes DM800 ink cartridge label close-up reading Pitney Bowes Red Ink 190ml Reorder 766-8
  • Pitney Bowes DM800 stacker output end view showing output tray and stacker module housing on freight dolly
  • Pitney Bowes DM800 rear connectivity panel showing 2x USB Type-A ports and 1x DB9 serial port
  • Pitney Bowes DM800 rear power inlet area showing IEC C14 power connector, rocker on/off switch, and DJF0 label with 100-240V 50/60Hz 5.0A Max rating
$350.00
Was: $2,600.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Pitney Bowes DM800 DJB0 Digital Mailing System No IntelliLink For Parts

The Pitney Bowes DM800 is a high-volume inline digital mailing system built for large mail-room operations. This unit is being sold strictly as-is for parts or repair. The IntelliLink Control Center — the touchscreen module that manages postage rates, accounting, and USPS LAN connectivity — is not present, and without it the system cannot be powered or operated. The unit carries PCNs DJB0 and DJF0 on the main housing labels and includes the DJW1 module (PCN DJW3).

Specifications & What's Included

  • Brand: Pitney Bowes
  • Model: DM800
  • PCN (main unit labels): DJB0 / DJF0
  • Module present: DJW1 (PCN DJW3)
  • Power: 100–240V AC, 50/60 Hz, 5.0A Max
  • Connectivity (rear panel): 2x USB Type-A ports, 1x DB9 serial port
  • Power inlet: IEC C14 connector with rocker on/off switch
  • Certifications: UL Listed (ITE 6886), CE, RoHS
  • Assembled in USA (Stamford, CT)
  • IntelliLink Control Center: NOT included — mounting bay and parallel interface port are present but module is absent
  • Feeder section: stainless steel feed deck with envelope guides, feed rollers, and transport assembly
  • Print module bay: present with ink cartridge installed (Pitney Bowes Red Ink 190ml, reorder 766-8)
  • Tape loading bay: tape roll installed, Load Tape Here label present
  • Internal transport roller deck: 4-roller assembly with stainless steel feed tray
  • Drive roller assembly: one component labeled "Reconditioned Part"
  • Known damage: cracked ribbon cable visible internally
  • Stacker/output module present at exit end
  • Approximate dimensions: 69" x 20" x 15"
  • Freight shipping required due to size

Applications

The Pitney Bowes DM800 is a high-capacity digital postage meter and mailing system designed for organizations that process large volumes of outgoing mail — typically corporate mail rooms, universities, government agencies, and large businesses. The system automates envelope feeding, postage printing, sealing, and stacking in a single inline pass, replacing manual meter stamping for runs of hundreds or thousands of pieces per day. The DM800 was introduced in the mid-2000s as part of Pitney Bowes' DM Series, which replaced earlier analog meter systems with USPS-approved digital metering connected via LAN through the IntelliLink Control Center. The IntelliLink module is the brain of the system: it stores the postage license, connects to the USPS for rate updates, and controls job accounting — which is why its absence makes this unit non-operational as a postal system. This listing is well-suited to parts sourcing: the feeder transport assembly, print mechanism, roller deck, stacker module, and DJW1 module are all serviceable components that support other DM800 installations. Buyers maintaining or repairing existing DM800 systems in the field are the primary audience for this unit.

Condition: For Parts or Not Working
This Pitney Bowes DM800 Digital Mailing System (PCN DJB0/DJF0) is being sold as-is for parts or repair. The IntelliLink Control Center module — the touchscreen unit that handles postage rates, accounting, and USPS connectivity — is not included, and without it the system cannot be powered or tested. The unit was removed from an active mail room at a local college. The feeder transport section, print mechanism, tape loading bay (with tape roll installed), and ink cartridge bay (Pitney Bowes Red Ink 190ml, reorder 766-8) are all present. A cracked ribbon cable is visible internally, and one transport drive roller assembly component carries a "Reconditioned Part" label. The DJW1 module (PCN DJW3) is present on the unit. The system is large — approximately 69" x 20" x 15" — and will require freight shipping. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Pitney Bowes
Model:
DM800
MPN:
DM800
PCN:
DJB0 / DJF0
Secondary Model:
DJW1
Type:
Digital Mailing System / Postage Meter
SKU:
48667
Seller Notes:
IntelliLink Control Center module not included; tape roll and ink cartridge present
Country/Region of Manufacture:
United States
Power Requirements:
100-240V AC, 50/60 Hz, 5.0A Max
Connectivity:
2x USB, 1x DB9 Serial
Ink Cartridge:
Pitney Bowes Red Ink 190ml, Reorder 766-8
Tape Roll:
Tape roll present in tape loading bay
Form Factor:
Freestanding Inline Mailing System
Dimensions:
Approx. 69" x 20" x 15"
Shipping Method:
Freight required due to size and weight
Missing Component:
IntelliLink Control Center module (touchscreen) not included
Certifications:
UL Listed, CE, RoHS
Compatible With:
Pitney Bowes DM Series mailing systems
Condition Notes:
Pitney Bowes DM800 Digital Mailing System sold as-is for parts. IntelliLink Control Center missing; cannot be powered or tested. Removed from working college mail room. Cracked ribbon cable internally. Freight required.
Secondary PCN:
DJW3
Interface — IntelliLink Bay:
Parallel interface port present; mounting bay empty
Known Damage:
Cracked ribbon cable visible internally
Noted Component:
One drive roller assembly component labeled Reconditioned Part
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose