Optical Test Equipment
Optical Test Equipment refers to specialized tools used for analyzing and testing optical devices and systems. This category includes devices such as optical power meters, optical spectrum analyzers, optical time-domain reflectometers, and optical loss test sets. Optical Test Equipment is crucial for ensuring the quality and performance of optical components, fibers, and networks in various industries including telecommunications, data centers, and research laboratories. These tools are designed to measure parameters such as power levels, wavelengths, reflections, and losses in optical signals accurately. Investing in high-quality Optical Test Equipment is essential for maintaining and troubleshooting optical systems efficiently.
-
KomShine KLS-35 Optical Light Source 1310/1550nm OLS FC/SC/PC Fiber Tester
KomShine
$45.00Was: $90.00KomShine KLS-35 Optical Light Source 1310/1550nm OLS FC/SC/PC Fiber TesterHandheld optical light source for fiber optic cable testing and troubleshooting. Transmits continuous wave signals at 1310nm...53363- SKU:
- 53363
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- KomShine
- Model:
- KLS-35
- MPN:
- KLS-35
- Type:
- Optical Light Source (OLS)
- SKU:
- 53363
- Wavelength:
- 1310nm / 1550nm
- Connector Type:
- FC/SC/PC (interchangeable)
- Test Range:
- >-7dBm
- Output Mode:
- CW (Continuous Wave)
- Form Factor:
- Handheld
- Housing Material:
- Plastic with removable rubber protective boot
- Color:
- Green
- Condition:
- Used – Inspected
- Seller Notes:
- Includes optical light source unit, tethered dust cap, rubber boot, plain white storage box
- Country/Region of Manufacture:
- China
- Condition Notes:
- KomShine KLS-35 Optical Light Source, used, inspected. Clean LCD screen, light cosmetic scuffs on green rubber boot. Dust cap included. Good cosmetic condition overall.
$45.00Was: $90.00 -
Ophir Optronics PD2-A Laser Power Monitor w/ Stancor AC Adapter Power Supply
Ophir Optronics
$490.00Was: $975.00Ophir Optronics PD2-A Laser Power Monitor w/ Stancor AC Adapter Power SupplyHandheld/benchtop laser power measurement instrument with LCD digital display and front-panel wavelength selection...51832- SKU:
- 51832
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 6.70 LBS
- Brand:
- Ophir Optronics
- Model:
- PD2-A
- MPN:
- PD2-A
- Type:
- Laser Power Monitor
- SKU:
- 51832
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Includes Stancor AC adapter power supply. Internal batteries dead.
- Country/Region of Manufacture:
- Israel
- Form Factor:
- Handheld / Benchtop
- Power Requirements:
- AC Adapter (included); internal NiCd batteries (non-functional)
- Input Connector:
- BNC
- Output Connector:
- 3.5mm REC (recorder output)
- Charger Input:
- 3.5mm jack (CHARGER port)
- Display Type:
- LCD digital readout
- Measurement Type:
- Laser Power
- Power Ranges:
- 2mW, 20mW, 200mW, 2W (selectable)
- Units:
- mW, W, µW (selectable UP/DOWN)
- Wavelength Selector:
- Yes — front-panel wavelength adjustment
- Application:
- Laser power measurement, optical lab, laser R&D
- Compatible With:
- Ophir photodetector heads (standard BNC interface)
- Condition Notes:
- Ophir PD2-A Laser Power Monitor powers on with included Stancor AC adapter. Internal rechargeable batteries are dead — AC power required. Front-panel controls and LCD display functional. Normal lab wear. Calibration label present on rear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$490.00Was: $975.00 -
Wilcom T319 T355 Optical Level Meter Transmitter Set w/ Case AC Adapter
Wilcom
$175.00Was: $350.00Wilcom T319 T355 Optical Level Meter Transmitter Set w/ Case AC AdapterThe Wilcom T319 Optical Level Meter and T355 Optical Transmitter form a matched two-instrument set for fiber optic cable testing...50294- SKU:
- 50294
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 10.00 LBS
- Brand:
- Wilcom
- Model:
- T319
- Secondary Model:
- T355
- MPN:
- T319
- SKU:
- 50294
- Type:
- Optical Level Meter and Transmitter Set
- Condition:
- Used – Powers on via AC adapter; internal batteries dead
- Seller Notes:
- Includes T319 meter, T355 transmitter, carrying case, AC adapter, accessories
- Country/Region of Manufacture:
- United States
- Form Factor:
- Handheld / Portable
- Manufacturer:
- Wilcom Products, Inc.
- Manufacture Location:
- Laconia, NH
- Measurement Type:
- Optical Power Level
- Application:
- Fiber Optic Cable Testing / Loss Measurement
- Power Source:
- Internal rechargeable battery or AC adapter
- Includes:
- T319 meter, T355 transmitter, case, AC adapter, accessories
- Compatible With:
- Fiber optic cable plant testing and maintenance
- Date of Manufacture (T355):
- May 1992
- Date of Manufacture (T319):
- May 1991
- Condition Notes:
- Wilcom T319 meter and T355 transmitter power on via AC adapter. Internal rechargeable batteries are dead and need replacement. Not fully tested due to battery condition. Case, AC adapter, and accessories included. ~248 chars
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$175.00Was: $350.00 -
Oriel Corporation 7081 Pyroelectric Detector System 110V Benchtop
Oriel
$150.00Was: $300.00Oriel Corporation 7081 Pyroelectric Detector System 110V BenchtopThe Oriel Corporation 7081 is a benchtop pyroelectric detector system designed to measure the power and energy of laser and other...47816- SKU:
- 47816
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 7.00 LBS
- Brand:
- Oriel
- Model:
- 7081
- MPN:
- 7081
- Type:
- Pyroelectric Detector System
- SKU:
- 47816
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Powers on; display works; zero-adjust confirmed. Missing black knob on right side.
- Country/Region of Manufacture:
- United States
- Form Factor:
- Benchtop
- Power Requirements:
- 110V AC, 50/60 Hz, 0.4A
- Input Voltage:
- 110V AC
- Input Current:
- 0.4A
- Frequency:
- 50/60 Hz
- Measurement Type:
- Optical Power / Laser Energy
- Detector Type:
- Pyroelectric
- Display Type:
- Analog meter + LED digital readout
- Controls:
- Multiplier, Response (fast/med/slow), Ambient Suppress, Zero Set
- Multiplier Range:
- 10^2 to 10^6 watts
- Connector Type:
- BNC, DIN, DB25 parallel
- Application / Use Case:
- Laser power measurement, optical lab, photonics
- Manufacture Date:
- August 1985
- Condition Notes:
- Oriel 7081 Pyroelectric Detector System — powered on, display works, zero-adjust confirmed. Not tested further. Missing black knob on right side. Good used condition overall.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Monolight Instruments 6115 PbSe Lead Selenide Detector Unit 110V AC BNC
Monolight
$125.00Was: $250.00Monolight Instruments 6115 PbSe Lead Selenide Detector Unit 110V AC BNCA benchtop infrared detector unit using lead selenide (PbSe) sensor technology. Designed for infrared spectroscopy and optical...47930- SKU:
- 47930
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Monolight Instruments Ltd.
- Model:
- 6115
- MPN:
- 6115
- Type:
- PbSe Lead Selenide Infrared Detector Unit
- SKU:
- 47930
- Detector Material:
- PbSe (Lead Selenide)
- Spectral Range:
- Near-IR / Mid-IR (PbSe: ~1–5 µm typical)
- Output Connector:
- BNC
- Power Requirements:
- 110V AC
- Probe Included:
- No — probe not included
- Country/Region of Manufacture:
- England (United Kingdom)
- Form Factor:
- Benchtop / Desktop
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Unit powers on and indicator light illuminates. No probe included.
- Application:
- Infrared spectroscopy, optical detection, gas analysis
- Condition Notes:
- Monolight 6115 PbSe Lead Selenide Detector Unit — powers on, indicator light illuminates. No probe included. Good used cosmetic condition with normal shelf wear. Power cord attached. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$125.00Was: $250.00 -
Newport NRC 875 PIN Photodiode Supply Laser Optical Power Measurement Benchtop
NRC / Newport
$75.00Was: $150.00Newport NRC 875 PIN Photodiode Supply Laser Optical Power Measurement BenchtopBenchtop bias supply and control unit for Newport PIN photodiode detectors used in laser optical power measurement...48528- SKU:
- 48528
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Newport Corporation (NRC)
- Model:
- 875
- MPN:
- 875
- Type:
- PIN Photodiode Bias Supply
- SKU:
- 48528
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only — no accessories included. Pulled from working optical lab environment.
- Country/Region of Manufacture:
- United States
- Form Factor:
- Benchtop
- Output Connections:
- BIAS output, POWER output (rear panel)
- Application:
- Laser optical power measurement, PIN photodiode biasing
- Manufacturer:
- Newport Corporation, Fountain Valley, California
- Front Panel Controls:
- POWER ON rocker switch
- Dimensions:
- 6.5" x 4.25" x 3.5"
- Compatible With:
- NRC / Newport PIN photodiode detectors and laser measurement systems
- Condition Notes:
- Newport NRC 875 PIN Photodiode Supply inspected and in good used condition. Pulled from a working optical lab environment. Enclosure shows light surface wear; front label clean, rear BIAS and POWER connectors intact. Photos available.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
Sivers Lab Stockholm M3638-302010 Brusgenerator Noise Figure Meter 50 Ohm
Sivers Lab Stockhom
$75.00Was: $150.00Sivers Lab Stockholm M3638-302010 Brusgenerator Noise Figure Meter 50 OhmBenchtop noise figure meter and generator manufactured by Sivers Lab in Sweden. Measures noise figure (Brusfaktor) in decibels...38568- SKU:
- 38568
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 30.00 LBS
- Brand:
- Sivers Lab
- Model:
- M3638-302010
- MPN:
- M3638-302010
- Secondary Model:
- Silab 5825
- Type:
- Noise Figure Meter / Noise Generator
- SKU:
- 38568
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Sold as-is for parts or repair; not tested at our facility
- Country/Region of Manufacture:
- Sweden
- Form Factor:
- Benchtop / Portable
- Power Requirements:
- 110V or 220V AC, switchable
- Output Impedance:
- 50 Ohm
- Measurement Type:
- Noise Figure (Brusfaktor dB)
- Meter Scale:
- Brusfaktor dB, 50 Ohm
- Max dB Range:
- 10 to 20 dB (front panel selector)
- Voltage Switch:
- 110V / 220V selectable
- Power Switch:
- Till (On) / Fran (Off)
- UH Mark / Asset Code:
- CVA 7203
- Ind-Nr:
- 1057
- Compatible With:
- 50 Ohm RF systems; noise figure measurement applications
- Condition Notes:
- Sivers Lab M3638-302010 Brusgenerator noise figure meter. Sold as-is for parts or repair; not tested at our facility. Enclosure shows moderate paint loss and scuffing. No functionality guaranteed.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
Santec IPD-8-F Tap-Integrated Photo Detector 8-Channel C L-Band DWDM PCB
Santec
$350.00Was: $700.00Santec IPD-8-F Tap-Integrated Photo Detector 8-Channel C L-Band DWDM PCBThe Santec IPD-8-F is an 8-channel tap-integrated photo detector designed for inline optical power monitoring in fiber optic...37087- SKU:
- 37087
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Santec
- Model:
- IPD-8-F
- MPN:
- IPD-8-F
- Type:
- Tap-Integrated Photo Detector
- SKU:
- 37087
- Number of Channels:
- 8
- Wavelength Range:
- C-Band and L-Band
- Application:
- DWDM Optical Power Monitoring
- Compatible With:
- DWDM systems, optical switches, amplifiers
- Form Factor:
- PCB-Mountable Module
- Connector Type:
- Fiber optic with threaded barrel connector
- Country/Region of Manufacture:
- Japan
- Seller Notes:
- New in original Santec packaging with foam insert; 8 detector pigtails included
- Condition:
- New – Original Packaging
- Condition Notes:
- Santec IPD-8-F Tap-Integrated Photo Detector is new and unused, in original Santec packaging with all 8 detector pigtails present. Box shows minor shelf wear from storage. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$350.00Was: $700.00 -
OAI Optical Associates 540nm UV Probe P356 C1331 for UV Exposure Meter
Optical Associates
$175.00Was: $350.00OAI Optical Associates 540nm UV Probe P356 C1331 for UV Exposure MeterThis is a 540nm UV probe designed for use with OAI UV exposure meters. The probe measures ultraviolet radiation intensity and is...31721- SKU:
- 31721
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Optical Associates Inc. (OAI)
- Model:
- P356
- MPN:
- P356
- Secondary Model:
- C1331
- Type:
- UV Exposure Meter Probe
- SKU:
- 31721
- Wavelength:
- 540 nm
- Connector Type:
- AMP 206485-1 Multi-Pin Circular
- Application / Use Case:
- UV exposure measurement, photolithography, semiconductor fab
- Compatible With:
- OAI UV Exposure Meters
- Form Factor:
- Handheld / Bench Probe
- Seller Notes:
- Includes integrated cable with AMP 206485-1 multi-pin connector
- Condition:
- Used – Pulled from Working Environment
- Country/Region of Manufacture:
- United States
- Condition Notes:
- OAI P356 540nm UV probe inspected and in good used condition. Pulled from a working environment where it was in active use. Cable intact, AMP multi-pin connector clean. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$175.00Was: $350.00 -
Oriel 7072 Photodiode Detection System Controller 110V Newport Optical Lab
Oriel
$125.00Was: $250.00Oriel 7072 Photodiode Detection System Controller 110V Newport Optical Lab The Oriel Corporation Model 7072 is a benchtop photodiode detection system controller designed to interface with photodiode...20281- SKU:
- 20281
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 12.00 LBS
- Brand:
- Oriel
- Model:
- 7072
- MPN:
- 7072
- Type:
- Photodiode Detection System Controller
- SKU:
- 20281
- Condition:
- Used – Inspected
- Form Factor:
- Benchtop
- Power Requirements:
- 110V, 50/60Hz, 0.5A
- Input Voltage:
- 110 V
- Frequency:
- 50/60 Hz
- Current Rating:
- 0.5 A
- Manufacture Date:
- April 1984
- Country/Region of Manufacture:
- United States
- Application / Use Case:
- Optical detection, photocurrent measurement, lab
- Interface / Connector:
- DB-25 parallel connector, banana jacks (rear panel)
- Controls:
- Multiplier, Ambient Suppress, Response, Zero, Measure
- Display:
- LED digital readout + analog meter
- Measurement Type:
- Photocurrent / optical power
- Compatible With:
- Oriel photodiode detectors and optical benches
- Seller Notes:
- Controller unit only — no detector or accessories included
- Condition Notes:
- Oriel 7072 Photodiode Detection System Controller inspected and in good condition. Shows normal lab wear. Controller unit only — no detector or accessories included. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$125.00Was: $250.00 -
Tektronix 7B50 100MHz Timebase Plug-In for 7000 Series Oscilloscope AS-IS
Tektronix
$29.70Was: $100.00Tektronix 7B50 100MHz Timebase Plug-In for 7000 Series Oscilloscope AS-IS The Tektronix 7B50 is a 100 MHz timebase plug-in designed for use with Tektronix 7000-series oscilloscope mainframes. The...19349- SKU:
- 19349
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Tektronix
- Model:
- 7B50
- MPN:
- 7B50
- SKU:
- 19349
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Sold AS-IS for parts or repair. No functionality guaranteed.
- Form Factor:
- Plug-In Module
- Compatible With:
- Tektronix 7000 Series Oscilloscope Mainframes
- Country of Manufacture:
- United States
- Measurement Type:
- Timebase
- Bandwidth:
- 100 MHz
- Time/Div Range:
- 0.5 ns/div to 5 s/div (with magnifier)
- Triggering:
- Internal, External, Line; AC, DC, HF Rej coupling
- Display Mode:
- Time Base, Amplifier
- Magnifier:
- 10x
- Type:
- Oscilloscope Timebase Plug-In
- Condition Notes:
- This Tektronix 7B50 100MHz Timebase Plug-In is being sold AS-IS for parts or repair. Its operational status is unknown — it has not been tested and no functionality is guaranteed.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$29.70Was: $100.00