Microwave and RF

Microwave and RF

The Microwave and RF category encompasses technologies related to microwave frequencies and radio frequency systems. This field includes the design, development, and application of components such as amplifiers, antennas, filters, and transmitters. Researchers and engineers in this category focus on advancing communication systems, radar systems, wireless networks, and satellite technologies. The Microwave and RF industry plays a crucial role in various sectors such as telecommunications, aerospace, healthcare, and defense. Professionals in this field work with electromagnetic waves in the microwave and RF range to create innovative solutions for high-speed data transmission and wireless connectivity.

  • Aydin 3053 Demodulator Bit Sync front panel view showing LED display and data entry keypad in 19-inch rack chassis Aydin 3053 rear panel showing multiple BNC connectors for four channel inputs/outputs, RS-232, RS-449, IEEE-488, and AC power inlet

    Aydin 3053 Demodulator Bit Sync 356-0313-502 4-Ch RS-232 IEEE-488 19" Rack

    Aydin

    $400.00
    Was: $800.00
    Aydin 3053 Demodulator Bit Sync 356-0313-502 4-Ch RS-232 IEEE-488 19" RackThe Aydin 3053 is a 19-inch rackmount PCM telemetry demodulator and bit synchronizer manufactured by Aydin Computer and...
    45079
    SKU:
    45079
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    33.00 LBS
    Brand:
    Aydin
    Model:
    3053
    MPN:
    356-0313-502
    Type:
    Demodulator / Bit Synchronizer
    SKU:
    45079
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Includes 3x Aydin 460-2443-505 circuit cards and 1x Aydin 460-2444-502 controller card
    Country/Region of Manufacture:
    United States
    Form Factor:
    19" Rackmount
    Number of Channels:
    4
    Interface Type:
    RS-232, RS-449, IEEE-488 (GPIB), TTL, BNC
    Rear Connectors:
    IEEE-488 (J4), RS-232 (J3), RS-449 (J2), AC PWR (J1), BNC
    Included Cards:
    3x Aydin 460-2443-505 circuit card; 1x Aydin 460-2444-502 controller card
    Manufacturer Division:
    Aydin Computer and Monitor Division
    CAGE Code:
    20747
    Manufacture Date:
    April 1996 (4-96 per label)
    Compatible With:
    Telemetry / satellite ground station systems
    Front Panel Controls:
    Data Entry keypad, PAGE, RESET, FCTN, ENTER; STATUS, REMOTE LEDs
    Front Panel Indicators:
    LOCK, CHANNEL, LOSS per channel (4 channels); POWER switch
    Display:
    LED/Vacuum fluorescent display (no readout — not functional)
    Application:
    PCM telemetry demodulation and bit synchronization
    Condition Notes:
    Aydin 3053 Bit Sync Demodulator P/N 356-0313-502 powers on but has no front panel display readout. Sold as-is for parts or repair — no functionality guarantee. Includes 3x 460-2443-505 circuit cards and 1x 460-2444-502 controller card.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $400.00
    Was: $800.00
  • CCI Duplexer 190-CU391-F1V6 – angled front-left view showing aluminum enclosure and red-capped N-type RF ports on right side CCI Duplexer 190-CU391-F1V6 – angled rear-left view showing aluminum enclosure and small coaxial connector on rear edge

    CCI Duplexer 190-CU391-F1V6 FC3062607505 RF N-Type TNC Cavity Filter

    CCI

    $150.00
    Was: $300.00
    CCI Duplexer 190-CU391-F1V6 FC3062607505 RF N-Type TNC Cavity FilterRF cavity duplexer for signal separation and filtering in telecom and base station applications. Aluminum enclosure construction...
    40914
    SKU:
    40914
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    14.00 LBS
    Brand:
    CCI
    Model:
    190-CU391-F1V6
    MPN:
    190-CU391-F1V6
    Secondary Model:
    FC3062607505
    Type:
    RF Cavity Duplexer
    SKU:
    40914
    Condition:
    Used – Inspected
    Connector Type:
    N-Type, TNC
    Construction:
    Aluminum cavity enclosure
    Seller Notes:
    Unit only; no cables or accessories included.
    Form Factor:
    Flat panel / cavity module
    Application:
    RF signal separation, base station, telecom
    Country/Region of Manufacture:
    United States
    Condition Notes:
    CCI Duplexer 190-CU391-F1V6 inspected and in good used condition. Aluminum enclosure shows light surface soiling and minor scuffs. N-type and TNC connectors intact. Unit only, no cables included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00
  • Nokia WBVB CS7299413 mast head amplifier module shown with original Nokia cardboard box Nokia WBVB module top and side view showing BTS, PITA, ANT labels, UL and CE markings, and label with part number CS7299413_01

    Nokia CS7299413 WBVB BTS Mast Head Amplifier Module BTS PITA ANT

    Nokia

    $75.00
    Was: $150.00
    Nokia CS7299413 WBVB BTS Mast Head Amplifier Module BTS PITA ANTMast head amplifier (MHA) module for Nokia BTS cellular base transceiver stations. Mounts at the antenna to amplify RF signals in the...
    40900
    SKU:
    40900
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    4.00 LBS
    Brand:
    Nokia
    Model:
    WBVB
    MPN:
    CS7299413...01
    Secondary Model:
    CS7299413_01
    Type:
    Mast Head Amplifier (MHA) Module
    SKU:
    40900
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes original Nokia box. MHA switch not included.
    Country/Region of Manufacture:
    Finland
    Manufacturer:
    Filtronic (for Nokia)
    Application:
    Cellular BTS Base Transceiver Station RF Front End
    Connections:
    BTS, PITA, ANT
    Connector Type:
    7/16 DIN (RF), 4-pin circular (PITA/control)
    Certifications:
    UL Listed, CE
    Form Factor:
    Compact Module / Mast-Mounted
    Compatible With:
    Nokia BTS systems with WBVB MHA interface
    Date Code / Print Date:
    2005-11-18
    Interface:
    BTS port, ANT port, PITA control port
    Condition Notes:
    Nokia CS7299413 WBVB mast head amplifier in good used condition. Pulled from a working environment. Comes in original box. MHA switch not included. Minor oxidation on one RF port contact face — see photos.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • Nokia CS7299413 WBVB Bias Tee T900 shown with cables in ESD bag and original Nokia box — overview Nokia WBVB CS7299413 Bias Tee front view showing Nokia logo, WBVB designation, BTS PITA and ANT port labels, UL and CE markings

    Nokia CS7299413 WBVB Bias Tee T900 VSWR BTS Antenna Cables Original Box

    Nokia

    $75.00
    Was: $150.00
    Nokia CS7299413 WBVB Bias Tee T900 VSWR BTS Antenna Cables Original BoxThe Nokia CS7299413 WBVB is a bias tee designed for use in Nokia T900 base transceiver station (BTS) antenna feed lines. A bias...
    40899
    SKU:
    40899
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    4.00 LBS
    Brand:
    Nokia
    Model:
    CS7299413
    MPN:
    CS7299413...01
    Secondary Model:
    WBVB
    Type:
    Bias Tee
    SKU:
    40899
    Application:
    VSWR Monitoring, BTS Antenna Feed
    Compatible With:
    Nokia T900 BTS, Nokia Base Transceiver Station
    Frequency Band:
    900 MHz (T900)
    Connector Type (BTS Side):
    7-16 DIN (BTS/PITA port)
    Connector Type (Antenna Side):
    7-16 DIN (ANT port)
    Connector Type (Control):
    Multi-pin circular connector (BTS PITA)
    Certifications:
    UL Listed, CE
    Country/Region of Manufacture:
    Finland
    Manufacturer:
    Filtronic (manufactured for Nokia)
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes cables (in ESD bag) and original Nokia box
    Form Factor:
    Inline Module / Block Assembly
    Condition Notes:
    Nokia CS7299413 WBVB Bias Tee pulled from a working BTS environment, inspected and in good used condition. Housing clean; some oxidation on ANT-side flange. Cables in ESD bag and original Nokia box included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • Omni-Spectra 2001-6101-00 OSM 16179 50 Ohm 18 GHz SMA coaxial termination — front face showing SMA male connector and gold-plated hex body Omni-Spectra OSM 16179 coaxial termination — top and side view of gold hex body showing surface oxidation and label on cap

    Omni-Spectra 2001-6101-00 OSM 16179 50 Ohm 18 GHz SMA Coax Termination Load

    $8.00
    Was: $15.00
    Omni-Spectra 2001-6101-00 OSM 16179 50 Ohm 18 GHz SMA Coax Termination LoadFixed coaxial RF termination load designed to terminate unused ports on test equipment, network analyzers, and RF systems...
    40820
    SKU:
    40820
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Omni-Spectra
    Model:
    OSM 16179
    MPN:
    2001-6101-00
    Secondary Model:
    2001-6101-00
    Type:
    Fixed Coaxial Termination / RF Load
    SKU:
    40820
    Impedance:
    50 Ohm
    Frequency Range:
    DC to 18 GHz
    Connector Type:
    SMA (male)
    Form Factor:
    Miniature / Inline
    Seller Notes:
    Sold individually. Unit only — no accessories.
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and Tested
    Condition Notes:
    Omni-Spectra 2001-6101-00 OSM 16179 50 Ohm 18 GHz SMA coaxial termination. Inspected, good condition. Body shows minor surface oxidation typical of age. SMA connector face clean and intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $8.00
    Was: $15.00
  • Varian 01000281-00E RF Input Module top view with two attached semi-rigid RF cables and SMA/TNC connectors on black housing Varian 01000281-00E RF Input Module front panel closeup showing 'CALIBRATED AT TEST' label, dual TNC connectors, calibrated dB and GHz frequency table (14.00–14.50 GHz), and SMA adapter

    Varian 01000281-00E RF Input Module 14 GHz SMA Calibrated Satellite

    Varian

    $35.00
    Was: $70.00
    Varian 01000281-00E RF Input Module 14 GHz SMA Calibrated SatelliteRF input module designed for Ku-band satellite uplink applications. This benchtop module conditions and routes 14 GHz RF signals...
    40030
    SKU:
    40030
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Varian
    Model:
    01000281-00E
    MPN:
    01000281-00E
    Type:
    RF Input Module
    SKU:
    40030
    Frequency Range:
    14.00 – 14.50 GHz
    Frequency Band:
    Ku-band
    Connector Type:
    SMA, TNC
    Calibration:
    Calibrated at Test
    Included Cables:
    01-005462-00(A), 01-005464-00(A)
    Cable Date Code:
    LEE MAH 91 20 / LEE MAH 91 25
    Form Factor:
    Module / Benchtop
    Application:
    Satellite uplink RF signal input, Ku-band
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Includes two semi-rigid RF cables: 01-005462-00(A) and 01-005464-00(A)
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Varian 01000281-00E RF Input Module inspected and in good used condition. Housing shows minor wear; SMA and TNC connectors intact. Two semi-rigid RF cables included (01-005462-00(A) & 01-005464-00(A)).
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • RF Input Module 2 01000281-C front panel with SMA connectors and attached coaxial cable leads, angled view RF Input Module 2 01000281-C close-up of front panel showing CALIBRATED AT TEST label, GHz frequency markings (5925–6425) and dB attenuation columns

    RF Input Module 2 01000281-C 5925-6425MHz 12.2-52.4dB C-Band Attenuator SMA

    RF

    $65.00
    Was: $125.00
    RF Input Module 2 01000281-C 5925-6425MHz 12.2-52.4dB C-Band Attenuator SMARF input attenuator module for C-Band applications. Provides variable attenuation control across the 5925–6425 MHz frequency...
    40029
    SKU:
    40029
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    2.00 LBS
    Brand:
    Unbranded
    Model:
    RF Input Module 2
    MPN:
    01000281-C
    Type:
    RF Input Attenuator Module
    SKU:
    40029
    Condition:
    Used – Inspected
    Frequency Range:
    5925–6425 MHz (C-Band)
    Attenuation Range:
    12.2–52.4 dB
    Connector Type:
    SMA
    Calibration:
    Calibrated at Test
    Form Factor:
    Module / Panel-Mount
    Band:
    C-Band
    Seller Notes:
    Includes attached SMA coaxial cable leads as shown in photos.
    Condition Notes:
    RF Input Module 2 (01000281-C) inspected and in good used condition. Front panel markings legible, SMA connectors intact, coaxial leads present and undamaged. Light surface wear on housing.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • RF Tubing Calibrated Input Module 01000281-C – full assembly view showing black chassis with semi-rigid coaxial tubing, N-type connector end, and SMA end RF Tubing Calibrated Input Module 01000281-C – front panel closeup showing 'CALIBRATED AT TEST' label, two panel connectors, and printed dB and GHz calibration table (5925–6425 MHz)

    RF Tubing Calibrated Input Module 01000281-C 5925-6425 MHz N-Type SMA

    RF Tubing

    $95.00
    Was: $200.00
    RF Tubing Calibrated Input Module 01000281-C 5925-6425 MHz N-Type SMACalibrated RF input module designed for microwave and telecom test applications. Semi-rigid coaxial tubing assembly with N-type...
    40028
    SKU:
    40028
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    2.00 LBS
    Brand:
    Unbranded
    Model:
    01000281-C
    MPN:
    01000281-C
    Type:
    RF Tubing Calibrated Input Module
    SKU:
    40028
    Frequency Range:
    5925–6425 MHz (5.925–6.425 GHz)
    Calibration Frequencies (GHz):
    5925, 6050, 6175, 6300, 6425
    Input dB Values (Left Port):
    12.2, 12.2, 12.2, 12.3, 12.3 dB
    Output dB Values (Right Port):
    51.8, 51.6, 51.5, 51.5, 51.5 dB
    Connector Type 1:
    N-Type (female, on cable end)
    Connector Type 2:
    SMA (on cable end)
    Panel Connectors:
    2x BNC-style panel jacks (front face)
    Transmission Line Type:
    Semi-rigid RF coaxial tubing
    Calibration Status:
    Calibrated at Test (labeled on unit)
    Form Factor:
    Benchtop / Module
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Includes module with attached semi-rigid RF tubing, N-type end, and SMA end
    Condition Notes:
    RF Tubing Calibrated Input Module 01000281-C has been inspected and is in good used condition. Chassis intact, calibration label legible, semi-rigid tubing and connectors present. Light shelf wear. Please contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $95.00
    Was: $200.00
  • SMT I1316 891 RF coaxial isolator angled top view showing model label and SMA connectors on two sides SMT I1316 891 RF coaxial isolator front view showing model number label and two SMA female ports labeled 1 and 2

    SMT I1316 891 RF Coaxial Isolator SMA Connector Microwave Component ICY63

    SMT

    $35.00
    Was: $70.00
    SMT I1316 891 RF Coaxial Isolator SMA Connector Microwave Component ICY63RF coaxial isolator for microwave and RF systems. Provides isolation between connected components to prevent signal...
    38753
    SKU:
    38753
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    SMT
    Model:
    I1316
    MPN:
    I1316
    Secondary Model:
    891
    Type:
    RF Coaxial Isolator
    SKU:
    38753
    Connector Type:
    SMA (Female)
    Number of Ports:
    3
    Housing:
    Machined Metal, Nickel-Plated
    Country/Region of Manufacture:
    United States
    Form Factor:
    Inline / Drop-In
    Seller Notes:
    Unit only. No additional accessories included.
    Condition:
    Used – Inspected and Pulled from Working Environment
    Compatible With:
    SMA-based RF/microwave systems and test setups
    Condition Notes:
    SMT I1316 / 891 RF coaxial isolator. Inspected and in good used condition. Housing shows light wear and minor oxidation. All three SMA connectors appear intact and undamaged.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • CCI 190-CU391-F1V6 RF Duplexer — top and front view showing cavity housing with brass tuning screws and four 7/16 DIN connectors with red protective caps, hardware kit bag alongside Hardware kit FC3062604905 label showing part number 192-00687, contents 157-00118 qty 4 and 157-00115 qty 15, with Torx fasteners laid out on burlap bag

    CCI 190-CU391-F1V6 RF Duplexer UMTS Cositing Microwave Satcom 192-00687

    CCI

    $275.00
    Was: $550.00
    CCI 190-CU391-F1V6 RF Duplexer UMTS Cositing Microwave Satcom 192-00687RF duplexer cavity filter for UMTS/3G and satellite communication systems. Four 7/16 DIN coaxial RF ports; machined aluminum...
    36506
    SKU:
    36506
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    14.00 LBS
    Brand:
    CCI
    Model:
    190-CU391-F1V6
    MPN:
    190-CU391-F1V6
    Secondary Model:
    FC6061916720
    Kit Part Number:
    192-00687
    Kit FC Number:
    FC3062604905
    Hardware Part 1:
    157-00118 (qty 4)
    Hardware Part 2:
    157-00115 (qty 15)
    SKU:
    36506
    Type:
    RF Duplexer
    Application:
    UMTS Cositing, Microwave Satcom
    Technology:
    UMTS / 3G
    Connector Type:
    7/16 DIN (large coaxial RF connectors)
    Number of RF Ports:
    4 (visible on connector face)
    Construction:
    Cavity filter / duplexer, machined aluminum housing
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes hardware kit FC3062604905 (P/N 192-00687): 157-00118 x4, 157-00115 x15
    Form Factor:
    Standalone Module / Flat-Pack Cavity Assembly
    Condition Notes:
    CCI 190-CU391-F1V6 RF Duplexer pulled from a working UMTS satcom environment, in use and functional. Inspected; housing shows surface oxidation/patina from field use. All RF connectors intact. Hardware kit 192-00687 included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $275.00
    Was: $550.00
  • Artel R3050-840 fiber optic video receiver plug-in card — front panel angled view showing RX Overload, RX Input, Video On LEDs and Video Level Adjust control Artel R3050-840 module front panel close-up showing RX Overload, RX Input, Video On indicator LEDs, Video Level Adjust pot, Test LED, and Video Level Off switch

    Artel R3050-840 Video Fiber Optic Receiver Module Card Satcom RF R3050

    ARTEL

    $90.00
    Was: $175.00
    Artel R3050-840 Video Fiber Optic Receiver Module Card Satcom RF R3050Fiber optic video receiver plug-in card module designed for use in Artel communications systems. This card receives video signals...
    36031
    SKU:
    36031
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    Artel Communications Corporation
    Model:
    R3050-840
    MPN:
    R3050-840
    Secondary Model:
    R3050
    SKU:
    36031
    Type:
    Fiber Optic Video Receiver Plug-In Card Module
    Form Factor:
    Plug-In Card / Module
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    TX# 1213 and RX# 1213 are a factory optimized pair
    Front Panel Indicators:
    RX Overload, RX Input, Video On LEDs; Test LED
    Front Panel Controls:
    Video Level Adjust pot; Video Level Off switch
    Connector Type:
    Gold-edge card connector; SMA-style RF/fiber connector
    Country/Region of Manufacture:
    United States
    Compatible With:
    Artel fiber optic video transmission systems
    Application:
    Fiber optic video signal reception and transmission
    Condition Notes:
    Artel R3050-840 fiber optic video receiver card. Inspected, good condition. Pulled from a working environment. TX# 1213 / RX# 1213 factory optimized pair. Normal wear. Please contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $90.00
    Was: $175.00
  • CCI RMC-1819-2-8 RX-AIT 1U rackmount receiver multicoupler front panel with included blue and gray cables laid on top CCI RMC-1819-2-8 RX-AIT rear chassis view showing gold-iridite rack tray, blue and gray cables, and small wiring harness

    CCI RMC-1819-2-8 RX-AIT 1900MHz Receiver Multicoupler Cositing UMTS GSM 1U

    CCI

    $325.00
    Was: $650.00
    CCI RMC-1819-2-8 RX-AIT 1900MHz Receiver Multicoupler Cositing UMTS GSM 1UReceiver multicoupler designed for 1900 MHz PCS band applications. Distributes a single RF input across 16 outputs arranged...
    34930
    SKU:
    34930
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    10.00 LBS
    Brand:
    Communication Components Inc
    Model:
    RMC-1819-2-8
    MPN:
    RMC-1819-2-8
    Secondary Model:
    RX-AIT
    SKU:
    34930
    Type:
    Receiver Multicoupler
    Frequency Band:
    1900 MHz (PCS Band)
    Application:
    Cositing UMTS / GSM
    Number of Outputs:
    16 (2 banks of 8 DIV OUT)
    Input Connector:
    BNC (RX IN)
    Output Connectors:
    SMA (DIV OUT ports)
    Bypass:
    Yes — switchable bypass (0/1)
    Alarm:
    Yes — alarm port (RJ-style connector)
    DC Bias:
    Yes — DC bias port present
    Form Factor:
    1U Rackmount (19-inch)
    What's Included:
    Unit, blue Cat5e cable, gray multi-conductor cable, connector pigtail harness
    Condition:
    New – Open Box
    Country/Region of Manufacture:
    United States
    Condition Notes:
    CCI RMC-1819-2-8 RX-AIT 1900MHz Receiver Multicoupler. New open-box — unused condition, not tested at our facility. Includes blue and gray cables and pigtail harness. Original box may not be included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $325.00
    Was: $650.00
  • Nokia 468532A RMC M2HA 2-way GSM multicoupler front panel showing multiple gold SMA connectors labeled RX1, RX2, DRX1, DRX2, with SMA flexiform cables alongside Nokia 468532A multicoupler rear/side view showing aluminum enclosure with mounting brackets and included SMA coaxial cable bundle

    Nokia 468532A 2-Way GSM 1800/1900 MHz Multicoupler RMC M2HA w/ SMA Cables

    Nokia

    $75.00
    Was: $150.00
    Nokia 468532A 2-Way GSM 1800/1900 MHz Multicoupler RMC M2HA w/ SMA CablesThe Nokia 468532A is a 2-way RF multicoupler (Nokia designation RMC M2HA) designed for GSM 1800 and GSM 1900 MHz cellular...
    34927
    SKU:
    34927
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    3.00 LBS
    Brand:
    Nokia
    Model:
    468532A
    MPN:
    468532A.105
    Secondary Model:
    RMC M2HA
    Part Number 2:
    1R024000252
    Variant Code:
    M2HA11
    Type:
    2-Way RF Multicoupler
    SKU:
    34927
    Frequency Band:
    GSM 1800 / GSM 1900 MHz
    Number of Ways:
    2
    Connector Type:
    SMA
    Application:
    Nokia GSM BTS / Cellular Base Station
    Includes:
    Multicoupler unit + Nokia SMA flexiform RF cables
    Cable Part Number:
    094081b 5005
    Manufacturer / Assembler:
    ELCOTEQ
    Condition:
    New – Open Box
    Country/Region of Manufacture:
    Finland
    Form Factor:
    Module / Card
    Condition Notes:
    Nokia 468532A RMC M2HA GSM Multicoupler — new/unused, open-box surplus. May have been stored long-term or removed from original packaging. Includes SMA flexiform cables. Please contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • Triangle Microwave CO-361 Directional Coupler — angled front-left view showing CPL port on top, IN and OUT SMA ports on body Triangle Microwave CO-361 Directional Coupler — angled rear-right view showing SMA connectors and teal aluminum housing

    Triangle Microwave CO-361 Directional Coupler SMA RF Microwave Coaxial Component

    Triangle Microwave

    $35.00
    Was: $70.00
    Triangle Microwave CO-361 Directional Coupler SMA RF Microwave Coaxial ComponentThe Triangle Microwave CO-361 is a passive coaxial directional coupler in a compact, teal-anodized aluminum housing. It...
    33405
    SKU:
    33405
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    Triangle Microwave
    Model:
    CO-361
    MPN:
    CO-361
    Type:
    Directional Coupler
    SKU:
    33405
    Connector Type:
    SMA (female)
    Number of Ports:
    3 — IN, OUT, CPL
    Housing Material:
    Aluminum alloy
    Housing Color:
    Teal / Blue-Green
    Form Factor:
    Benchtop / In-line module
    Application:
    RF signal sampling, power monitoring, test setups
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Unit only; no cables or accessories included.
    Condition:
    Used – Inspected and in Good Condition
    Condition Notes:
    Triangle Microwave CO-361 Directional Coupler — inspected, good used condition. Housing shows normal shelf wear; SMA ports (IN, OUT, CPL) are intact with good threads. No damage to body.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • HP 788C Directional Detector front and top view showing HP logo label, two coaxial port stubs on top, and Type N connector on left side HP 788C Directional Detector side view showing Type N male coaxial connector with gold center pin and weathered metal housing

    HP Hewlett Packard 788C Directional Detector 3.7-8.3 GHz RF Microwave Signal

    HP

    $90.00
    Was: $175.00
    HP Hewlett Packard 788C Directional Detector 3.7-8.3 GHz RF Microwave Signal The HP 788C is a directional detector used for RF signal sampling and microwave power monitoring across the C and S band...
    33315
    SKU:
    33315
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    0.95 LBS
    Brand:
    HP
    Model:
    788C
    MPN:
    788C
    Type:
    Directional Detector
    SKU:
    33315
    Frequency Range:
    3.7–8.3 GHz (3.7–8.3 GC)
    Frequency Band:
    C-Band / S-Band microwave
    Connector Type:
    Type N (male input); APC-7 / precision coaxial ports
    Application:
    RF signal sampling, microwave power monitoring
    Form Factor:
    Handheld / Inline microwave component
    Seller Notes:
    Unit only, as photographed. No accessories included.
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Condition Notes:
    HP 788C Directional Detector pulled from a working environment, inspected and in good condition. Coaxial connectors intact. Housing shows age wear and label paint loss. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $90.00
    Was: $175.00
  • K&L Microwave 6MP-28-F-0-4 SP6T coaxial relay — top and side view showing cylindrical stainless body, K&L Microwave Incorporated label, Salisbury MD USA markings, and solder lug terminals on top K&L Microwave 6MP-28-F-0-4 SP6T coaxial relay — bottom flange view showing six SMA female connectors labeled J1 through J6 arranged radially with blue seals on stainless mounting plate

    K&L Microwave 6MP-28-F-0-4 SP6T Coaxial Relay Indicator Switch 18 GHz SMA

    K&L

    $275.00
    Was: $550.00
    K&L Microwave 6MP-28-F-0-4 SP6T Coaxial Relay Indicator Switch 18 GHz SMAThe K&L Microwave 6MP-28-F-0-4 is a single pole, 6-throw (SP6T) coaxial relay designed for RF and microwave signal switching...
    33312
    SKU:
    33312
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    K&L Microwave
    Model:
    6MP-28-F-0-4
    MPN:
    6MP-28-F-0-4
    Type:
    SP6T Coaxial Relay with Indicator Switch
    SKU:
    33312
    Configuration:
    Single Pole, 6 Throw (SP6T)
    Frequency Range:
    DC to 18 GHz (estimated)
    Connector Type:
    SMA Female
    Number of Ports:
    7 (1 common + 6 throw ports)
    Indicator Switch:
    Yes — insulated, indicates energized position
    Form Factor:
    Flange Mount, Cylindrical Body
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Pulled from a working environment; includes indicator switch function
    Condition:
    Used – Pulled from Working Environment
    Application:
    RF Signal Routing, Microwave Test Systems, ATE
    Condition Notes:
    K&L Microwave 6MP-28-F-0-4 SP6T coaxial relay inspected and in good used condition. Pulled from a working environment. Indicator switch appears functional. Estimated good to 18 GHz. SMA connectors clean.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $275.00
    Was: $550.00
  • HP Hewlett Packard H424A Crystal Detector – angled three-quarter view showing body, BNC output port, and blue WR-112 flange base HP H424A Crystal Detector – close-up front view of BNC output connector on blue flange mount

    HP Hewlett Packard H424A Crystal Detector WR-112 Waveguide BNC 7.05-10.0 GHz

    Hewlett Packard

    $65.00
    Was: $125.00
    HP Hewlett Packard H424A Crystal Detector WR-112 Waveguide BNC 7.05-10.0 GHz X-BandA waveguide-mounted crystal detector for X-Band microwave applications. This detector converts RF signals to...
    33301
    SKU:
    33301
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    0.95 LBS
    Brand:
    HP
    Model:
    H424A
    MPN:
    H424A
    Type:
    Waveguide Crystal Detector
    SKU:
    33301
    Frequency Range:
    7.05 to 10.0 GHz
    Frequency Band:
    X-Band
    Waveguide Size:
    WR-112
    Output Connector:
    BNC
    Detector Polarity:
    Negative (NEG)
    Flange Type:
    WR-112 Standard Flange
    Form Factor:
    Waveguide-Mounted Module
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes blue protective flange cover. Pulled from a working environment.
    Condition Notes:
    HP H424A Crystal Detector in good used condition. Pulled from a working environment. Body shows typical wear; BNC connector and WR-112 flange are clean and intact. Blue flange cover included. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • OSM RF load termination 3001 6100-00 — front view showing N-Male connector with gold center pin and knurled body OSM RF load termination 3001 6100-00 — rear/bottom view showing cylindrical termination cap end of the component

    OSM RF Load Termination N-Male Connector 50 Ohm Coaxial Dummy Load 3001 6100-00

    OSM

    $12.00
    Was: $25.00
    OSM RF Load Termination N-Male Connector 50 Ohm Coaxial Dummy Load 3001 6100-00RF coaxial dummy load termination for N-Male connectors. Used to terminate unused ports in RF and microwave test...
    33248
    SKU:
    33248
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    OSM
    Model:
    3001 6100-00
    MPN:
    3001 6100-00
    Type:
    RF Coaxial Load / Termination
    SKU:
    33248
    Connector Type:
    N-Male (N-M)
    Impedance:
    50 Ohm
    Form Factor:
    Inline / Inline Coaxial Component
    FSC Code:
    16179
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Unit only — no additional accessories included.
    Compatible With:
    N-Male coaxial RF systems and test setups
    Condition Notes:
    OSM RF Load Termination N-Male 3001 6100-00 has been inspected and is in good used condition. Minor surface wear on body; connector threads and center pin are undamaged. Label intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $12.00
    Was: $25.00
  • Anzac C254124 Power Divider – front/top view showing label with model number and SMA-F connectors on front face Anzac C254124 Power Divider – angled top view showing two SMA-F output connectors and label on top of housing

    Anzac C254124 RF Power Divider Splitter Combiner SMA-F Connectors Microwave

    Anzac

    $28.00
    Was: $60.00
    Anzac C254124 RF Power Divider Splitter Combiner SMA-F Connectors MicrowaveCoaxial RF power divider with one input port and two output ports, operating bidirectionally for splitting or combining...
    33241
    SKU:
    33241
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Anzac
    Model:
    C254124
    MPN:
    C254124
    Type:
    RF Power Divider / Splitter / Combiner
    SKU:
    33241
    Connector Type:
    SMA-F (SMA Female)
    Number of Ports:
    3 (1 input, 2 output / bidirectional)
    Technology:
    Coaxial RF / Microwave
    Housing / Enclosure:
    Metal (dark anodized aluminum)
    Form Factor:
    Benchtop / Inline Module
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Unit only; no additional accessories included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Anzac C254124 RF Power Divider inspected and in good used condition. Housing is solid, SMA-F connectors intact with normal wear. Please view photos and contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $28.00
    Was: $60.00
  • ARD RD EQ/Filter RF signal equalizer front and top panel view showing BNC input/output connectors, dB Boost and MHz Frequency control knobs, and calibration table label ARD EQ/Filter front panel close-up showing BNC Single and Diff inputs and four BNC EQ and DFF outputs with labeled connectors

    ARD EQ/Filter RF Signal Equalizer Booster dB MHz BNC Single Diff EQ DFF 120VAC

    ARD

    $130.00
    Was: $250.00
    ARD EQ/Filter RF Signal Equalizer Booster dB MHz BNC Single Diff EQ DFF 120VACBenchtop RF signal equalizer and filter unit designed to condition and boost broadband RF signals. Features adjustable...
    33053
    SKU:
    33053
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    5.00 LBS
    Brand:
    ARD
    Model:
    RD EQ/Filter
    MPN:
    RD EQ/Filter
    Type:
    RF Signal Equalizer / Filter
    SKU:
    33053
    Condition:
    Used – Inspected
    Seller Notes:
    Unit only; no accessories included. Calibration table label present on top.
    Power Requirements:
    120VAC, 1/4 Amp
    Input Connectors:
    BNC — Single-Ended and Differential (DIFF)
    Output Connectors:
    4x BNC — EQ and DFF outputs
    Boost Range:
    Adjustable via front-panel BOOST [dB] knob
    Frequency Range:
    Adjustable via front-panel FREQ [MHz] knob
    Frequency Caution:
    Do not exceed 130 on FREQ knob; cycle power if exceeded
    Form Factor:
    Benchtop / Desktop
    Signal Type:
    RF / Broadband
    Output Types:
    Equalized (EQ) and Differentiated (DFF)
    Calibration Table:
    Equalizer Calibration Table label affixed to top panel
    Country/Region of Manufacture:
    United States
    Condition Notes:
    This ARD RD EQ/Filter RF Signal Equalizer has been inspected and is in good used condition. Chassis and connectors show minor bench wear. BNC inputs/outputs appear intact. Control knobs present and functional. 120VAC.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $130.00
    Was: $250.00