Description
Lumenis UltraPulse Encore-OR CO2 Surgical Laser System For Parts 100-120V
The Lumenis UltraPulse Encore-OR is a CO2 (carbon dioxide, 10,600 nm) surgical and aesthetic laser system designed for soft tissue procedures including skin resurfacing, excision, incision, ablation, vaporization, and coagulation. It features both UltraPulse (high-peak-power pulsed) and Continuous Wave (CW) delivery modes, controlled through a color touchscreen interface, and delivers laser energy via an articulating weighted arm. This unit is being sold AS-IS for parts or repair — it is not functional as a complete system.
Specifications & What's Included
- Manufacturer: Lumenis (Coherent Medical Group platform)
- Model: UltraPulse Encore-OR
- Laser Type: CO2 (Carbon Dioxide), 10,600 nm wavelength
- Operating Modes: UltraPulse (pulsed, high peak power) and Continuous Wave (CW)
- Software Version: Rev C (visible on boot screen)
- Power Requirements: 100–120V AC, 50/60Hz, 20A
- Interface: Color touchscreen (Coherent Medical Group UI)
- Delivery System: Weighted articulating arm
- Form Factor: Mobile cart on casters
- UltraPulse mode settings visible: Energy up to 125 mJ, Rate 10 Hz (1.3W displayed)
- CW mode settings visible: Power 50 mW, Timed Exposure 10 ms, Repeat Delay 1.00s
- Rear panel: DB15 connector, BNC port, ventilation grille, laser hazard warning labels
- Includes: Blue UltraPulse thread adapter with lens (per original listing data)
- Footswitch: Not confirmed included — footswitch prompt displayed on screen
Applications
The Lumenis UltraPulse platform is a well-known CO2 laser system used in dermatology, plastic surgery, and aesthetic medicine for ablative skin resurfacing, scar revision, treatment of actinic keratosis, and surgical soft tissue procedures. CO2 lasers at 10,600 nm are strongly absorbed by water in tissue, making them effective for precise cutting and vaporization with controlled depth. The UltraPulse mode delivers high-energy pulses faster than tissue can conduct heat, reducing collateral thermal damage compared to older continuous-wave CO2 systems — a significant clinical advance when this platform was introduced. The Encore-OR designation indicates this unit was configured for operating room / surgical use in addition to aesthetic clinic applications. These systems are used by plastic surgeons, dermatologists, and ENT specialists, and functional units command significant value on the secondary medical equipment market. This particular unit is offered for parts and may be of interest to biomedical technicians or laser repair specialists.
This Lumenis UltraPulse Encore-OR CO2 Surgical Laser System is being sold AS-IS for parts or repair only. The touchscreen powers on and boots through to the main navigation interface (Software Rev C), and both the UltraPulse and CW control screens are accessible. However, the tower is physically damaged and leaning, and when powered on the system does not produce strong laser output — a fault/error indicator is visible on the control screen. The articulating arm is present. This unit is not functional as a complete system and is not guaranteed to work. It is priced and offered strictly for parts, components, or attempted repair by a qualified laser technician. Please review all photos carefully and contact us with any questions before purchasing.
Thanks for your interest. Recycled Goods Inc., Ventura, CA.
FDA Regulation and Certification: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not purchase this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping.
Upon receipt, it is the BUYER'S responsibility to have this instrument checked and certified for use by a qualified Technician prior to placing it into use or service.
Warranty Information
Additional Information
Brand: |
Lumenis |
Model: |
UltraPulse Encore-OR |
MPN: |
Encore-OR |
Type: |
CO2 Surgical Laser System |
SKU: |
52815 |
Seller Notes: |
Includes articulating arm, handpiece, and touchscreen interface. No accessories guaranteed. |
Power Requirements: |
100-120V AC, 50/60Hz, 20A |
Laser Type: |
CO2 (Carbon Dioxide) |
Laser Wavelength: |
10,600 nm (10.6 µm) |
Software Version: |
Rev C |
Interface: |
Color Touchscreen (Coherent Medical Group UI) |
Delivery System: |
Articulating Arm with Weighted Laser Head |
Form Factor: |
Mobile Cart / Tower on Casters |
Application: |
Skin resurfacing, soft tissue excision, ablation, coagulation |
Country/Region of Manufacture: |
United States |
Compatible With: |
UltraPulse Thread Adapter with lens (Blue) |
Condition Notes: |
Lumenis UltraPulse Encore-OR CO2 Surgical Laser – sold AS-IS for parts only. Screen powers on and navigates (Software Rev C); tower is physically damaged/leaning and laser does not produce strong output. Not functional. For parts or repair. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |