Description
Lneya Sundi-125 Recirculating Chiller & Heating Machine -10 to 200°C 220V 1-Phase 2.5kW
The Lneya Sundi-125 is a floor-standing recirculating chiller and heating machine capable of precise temperature control from -10°C to 200°C. Built by Wuxi Guanya Refrigeration Technology Co., Ltd. (Lneya), it circulates a heat transfer fluid through an external process load — heating or cooling as required — with the target temperature set and monitored via an integrated touchscreen HMI. The unit runs on single-phase 220V/60Hz power and uses R404A refrigerant for its cooling circuit.
Specifications & What's Included
- Model: Sundi-125 (Wuxi Guanya Refrigeration Technology Co., Ltd. / Lneya)
- Temperature range: -10°C to 200°C
- Heating power: 2.5 kW
- Cooling capacity: 200W – 2.5 kW (lower range); up to 9.5 kW (mid-range); ~1.5 kW (upper range)
- Power supply: 220V / 60Hz / 1-Phase
- Pump flow rate: 20 L/min at 2 bar
- Refrigerant: R404A, 1.3 kg charge
- Heat transfer fluid (previously used): Duratherm XLT-120
- Control interface: LNEYA color touchscreen HMI — displays Medium Return Temp, Medium Outlet Temp, Process Temp, Setting Temp, program number, and refrigeration system diagram
- External connectivity: RS485 communication port; Pt100 temperature input (circular multi-pin connector)
- Internal controls: DIN-rail PLC (LN-branded), DB 30-24 DIN-rail 24VDC power supply (100–240V input), contactor modules, terminal blocks, green PCB communication board
- Front panel: power button, emergency stop (red rotary disconnect), column of status indicator lights
- Fluid management: hand-wheel exhaust valve on top panel; fluid fill port cap; side-mounted liquid level indicator tube with Max and Min Fill Level markings
- Fluid ports: labeled OUT and RETURN fittings on rear/side panel
- Two analog pressure/refrigerant gauges on side panel
- Enclosure: stainless steel cabinet on four rubber-wheeled casters
- Dimensions: 400 × 600 × 1150 mm (W × D × H)
- Production date: May 2017
- Includes: AC Enviro certificate of cleaning confirming decontamination of chemical hazards (Duratherm XLT-120 fluid, dated 2/19/2019)
Applications
Recirculating chiller-heater systems like the Sundi-125 are used wherever a process requires controlled fluid temperature across a wide range — both above and below ambient. Common applications include reactor jacketing in chemical synthesis and pharmaceutical processing, temperature cycling in semiconductor and electronics testing, environmental simulation chambers, extruder barrel temperature control in plastics processing, and general laboratory temperature-controlled baths and condensers. The -10°C to 200°C range makes this class of unit particularly suited for processes that move between sub-ambient cooling and elevated heating within the same run. The Duratherm XLT-120 fluid previously in this unit is a high-temperature synthetic heat transfer fluid rated for continuous circulation at elevated temperatures, commonly specified in industrial and lab recirculator applications where thermal fluid stability matters. Units of this type connect via insulated fluid hoses to the jacketed vessel or process load, with the internal circulation pump maintaining flow at the set pressure and temperature.
This Lneya Sundi-125 Recirculating Chiller and Heating Machine has been inspected and is in good used condition. It comes with an AC Enviro certificate of cleaning confirming that chemical hazards have been decontaminated — the heat transfer fluid used was Duratherm XLT-120. The unit was pulled from a working environment where it was actively in use and functional. The stainless steel cabinet shows normal surface scuffing consistent with lab or industrial service; the touchscreen, controls, fluid ports, and internal components all appear complete and intact. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Lneya |
Model: |
Sundi-125 |
MPN: |
SUNDI-125 |
Type: |
Recirculating Chiller and Heating Machine |
SKU: |
53161 |
Temperature Range: |
-10°C to 200°C |
Heating Power: |
2.5 kW |
Cooling Capacity: |
200W – 2.5 kW (low range); up to 9.5 kW |
Power Requirements: |
220V / 60Hz / 1-Phase |
Pump Flow Rate: |
20 L/min, 2 bar |
Refrigerant: |
R404A, 1.3 kg charge |
Control Interface: |
LNEYA touchscreen (touch panel HMI) |
Connectivity: |
RS485, Pt100 input (circular connector) |
Heat Transfer Fluid: |
Duratherm XLT-120 |
Dimensions (mm): |
400 × 600 × 1150 mm |
Factory No.: |
0126005 |
Production Date: |
May 2017 |
Form Factor: |
Floor-Standing Cabinet on Casters |
Enclosure: |
Stainless Steel |
Manufacturer: |
Wuxi Guanya Refrigeration Technology Co., Ltd. |
Country/Region of Manufacture: |
China |
Application: |
Laboratory, Industrial Process Temperature Control |
Seller Notes: |
Unit only — no additional accessories included. Duratherm XLT-120 fluid previously used; decontaminated per AC Enviro certificate. |
Condition Notes: |
This Lneya Sundi-125 Recirculating Chiller has been inspected and is in good used condition. Includes AC Enviro decontamination certificate (Duratherm XLT-120 fluid). Pulled from working service. Normal surface wear on cabinet. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |