Description
Leeds & Northrup 420 Type-P Controller 120V 1A Cat 420-20-3-0104-21-2-1-100-300
Analog PID process controller designed for industrial process control applications. The 420 Type-P features proportional, rate, and reset control modes with selectable local or remote setpoint operation.
Specifications & What's Included
- Input Voltage: 120V AC, 50/60Hz
- Power Requirements: 14 VA
- Output: 120V AC, 1 Amp
- Control Modes: Proportional, Rate, Reset (Repeats/Minute), Approach
- Setpoint Mode: Local/Remote selectable
- Operating Mode: Auto/Manual selectable
- Form Factor: Panel/Rack Insert Module
- Unit only; labeled ETEC System Number on front panel
Applications
The 420 Type-P was used in industrial process control systems, particularly in manufacturing and utility applications requiring proportional control. These controllers were commonly integrated into larger control systems and instrumentation racks for temperature, pressure, and flow regulation. Historical use spans utility automation, chemical processing, and industrial HVAC applications.
Condition: Used
This Leeds & Northrup 420 Type-P process controller has been inspected and appears to be in good used condition overall. The aluminum housing shows general surface soiling and light wear consistent with industrial service, and the rating plate and front panel markings are legible. The four internal adjustment knobs (Proportional Gain, Rate Time, Repeats/Minute Reset, and Approach) are present and intact. The front panel percentage indicator strip and circular setpoint dial are visible and appear undamaged. The card-edge connector on the rear is present. This unit was previously labeled for an ETEC system application (Unit 2 ZIC-120 MFL Feed Valve) as seen on the front panel tags. It has not been powered or tested at our facility. Please view our photo set and contact us if you have any questions.
This Leeds & Northrup 420 Type-P process controller has been inspected and appears to be in good used condition overall. The aluminum housing shows general surface soiling and light wear consistent with industrial service, and the rating plate and front panel markings are legible. The four internal adjustment knobs (Proportional Gain, Rate Time, Repeats/Minute Reset, and Approach) are present and intact. The front panel percentage indicator strip and circular setpoint dial are visible and appear undamaged. The card-edge connector on the rear is present. This unit was previously labeled for an ETEC system application (Unit 2 ZIC-120 MFL Feed Valve) as seen on the front panel tags. It has not been powered or tested at our facility. Please view our photo set and contact us if you have any questions.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
Leeds & Northrup |
Model: |
420 Type-P |
MPN: |
420-20-3-0104-21-2-1-100-300 |
Secondary Model: |
177545 |
SKU: |
9624 |
Type: |
Analog PID Process Controller |
Input Voltage: |
120V AC, 50/60Hz |
Power Requirements: |
120V AC, 50/60Hz, 14 VA |
Output Voltage: |
120V AC |
Output Current: |
1 Amp |
Control Modes: |
Proportional, Rate, Reset (Repeats/Minute), Approach |
Setpoint Mode: |
Local / Remote selectable |
Form Factor: |
Panel/Rack Insert Module |
Country/Region of Manufacture: |
United States |
Condition: |
Used – Pulled from Working Environment |
Seller Notes: |
Unit only; labeled ETEC System Number application on front panel tags. |
Condition Notes: |
Leeds & Northrup 420 Type-P controller in good used condition with typical industrial wear. Four internal adjustment knobs intact. Not powered or tested at our facility. Pulled from industrial service. Contact us with questions. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |