Laboratory Equipment
Laboratory equipment refers to the various tools and instruments used in scientific research, experimentation, and analysis within a laboratory setting. These tools are essential for measuring, mixing, heating, cooling, and storing substances for research and development purposes. Common types of laboratory equipment include microscopes, centrifuges, pipettes, flasks, beakers, Bunsen burners, and pH meters. Accurate and reliable laboratory equipment is crucial for obtaining precise and repeatable results in various scientific fields such as chemistry, biology, physics, and medicine. Investing in high-quality laboratory equipment ensures the safety and efficiency of experiments, leading to successful outcomes and advancements in scientific knowledge.
-
Waters Associates 710A WISP Automatic Sample Injector Liquid Chromatography HPLC
Waters
$120.00Was: $269.00Waters Associates 710A WISP Automatic Sample Injector Liquid Chromatography HPLCThe Waters Associates 710A WISP (Waters Intelligent Sample Processor) is a benchtop automatic sample injection system...34369- SKU:
- 34369
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 120.00 LBS
- Brand:
- Waters
- Model:
- 710A WISP
- MPN:
- 710A
- Type:
- Automatic Sample Injection System / HPLC Autosampler
- SKU:
- 34369
- Condition:
- Used – Inspected
- Country/Region of Manufacture:
- United States
- Form Factor:
- Benchtop
- Power Requirements:
- 88-236V AC, 50/60 Hz, 350 VA max
- Input Voltage Range 1:
- 88-107V (nominal 100V), 5A fuse
- Input Voltage Range 2:
- 105-128V (nominal 120V), 5A fuse
- Input Voltage Range 3:
- 194-236V (nominal 220V), 2.5A fuse
- Maximum Power:
- 350 VA
- Connector A:
- 15-pin D-sub (female)
- Connector B:
- 15-pin D-sub (male)
- Application:
- Liquid Chromatography / HPLC Sample Introduction
- Front Panel Lines:
- Column: Red (0.009" ID); From Pump: Blue (0.04" ID)
- Rear Panel Lines:
- Needle Wash Out: Yellow (1/16"); Needle Wash In: Green
- Air/Nitrogen Inlet Pressure:
- 30-100 psi (1/8" line)
- Dimensions:
- 18" x 15" x 13"
- Seller Notes:
- Unit only; no accessories included. Please see photos.
- Patent:
- U.S. Patent 3,916,692
- Condition Notes:
- Waters Associates 710A WISP Automatic Sample Injection System. Inspected and in good used condition. Front panel, keypad, and carousel intact with normal lab wear. Rear D-sub connectors undamaged. See photos.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$120.00Was: $269.00 -
Ultratech Stepper 0509-290800 50-Way Rainbow Ribbon Cable 32-Bit Interface Rev
Ultratech Stepper
$75.00Was: $150.00Ultratech Stepper 0509-290800 50-Way Rainbow Ribbon Cable 32-Bit Interface Rev B1A 50-conductor flat rainbow ribbon cable assembly designed for 32-bit interface connections on Ultratech Stepper...31118- SKU:
- 31118
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- UltraTech Stepper
- Model:
- 0509-290800
- MPN:
- 0509-290800
- Type:
- Rainbow Ribbon Cable
- SKU:
- 31118
- Revision:
- Rev B1
- Number of Conductors:
- 50
- Cable Style:
- Rainbow Flat Ribbon
- Interface:
- 32-Bit Interface
- Compatible With:
- Ultratech Stepper lithography systems
- Seller Notes:
- New old stock in original sealed Ultratech Stepper bag with QC acceptance tag.
- Country/Region of Manufacture:
- United States
- Condition:
- New – Old Stock (sealed OEM bag)
- Condition Notes:
- Ultratech Stepper 0509-290800 rainbow ribbon cable. New old stock in original sealed OEM bag with QC tag. Rev B1, dated 9/4/93. Bag seal appears intact. No signs of use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
TMA Quartz Sample Holder Thermomechanical Analyzer Dilatometry Lab Accessory
TMA
$325.00Was: $650.00TMA Quartz Sample Holder Thermomechanical Analyzer Dilatometry Lab AccessoryThis is a quartz glass sample holder assembly designed for use with thermomechanical analyzers (TMA). The assembly consists...31034- SKU:
- 31034
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Unbranded
- Model:
- TMA Quartz Sample Holder
- Type:
- TMA Sample Holder / Thermal Analysis Accessory
- Material:
- Quartz glass tube, stainless steel base
- Compatible With:
- Thermomechanical Analyzers (TMA)
- Application:
- Thermomechanical Analysis, Dilatometry
- Includes:
- Quartz glass tube, stainless steel base, lead wires
- Connector Type:
- Multi-pin circular connector (red and black leads)
- Condition:
- New – Open Box; may have been stored; out of original packaging
- SKU:
- 31034
- Seller Notes:
- New from manufacturer; may have been stored; out of original packaging
- Condition Notes:
- New open-box TMA quartz sample holder — new from manufacturer, never used, but may have been stored long-term or past shelf life, and is out of original packaging. Assembly appears complete. Contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$325.00Was: $650.00 -
Custom Vacuum Chuck Assembly Steel Block Linear Bearing Pneumatic 23x21cm Al
Unbranded
$200.00Was: $400.00Custom Vacuum Chuck Assembly Steel Block Linear Bearing Pneumatic 23x21cm Al BaseThis is a custom-built vacuum chuck assembly designed for precision workholding using pneumatic vacuum actuation. The...30901- SKU:
- 30901
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 16.00 LBS
- Brand:
- Unbranded
- Model:
- Custom Vacuum Chuck Assembly
- Type:
- Vacuum Chuck Assembly
- SKU:
- 30901
- Condition:
- Used – Inspected
- Base Plate Dimensions:
- 23 x 21 cm
- Steel Block Insert Size:
- 2.5 x 9.2 cm (two pieces)
- Actuator / Clamp Type:
- Toggle clamp / lever arm
- Linear Bearing:
- Yes
- Pneumatic Connections:
- Yes – spanner switches for pneumatic lines
- Micrometer Screws:
- Yes – one dial missing
- Base Material:
- Aluminum
- Chuck / Block Material:
- Steel (flat ground)
- Application:
- Vacuum workholding, semiconductor, precision machining
- Form Factor:
- Benchtop
- Seller Notes:
- One micrometer dial is missing. Pneumatic lines and linear bearing present.
- Condition Notes:
- Custom vacuum chuck assembly inspected and in good used condition. Linear bearing, pneumatic switches, and toggle clamp present. One micrometer dial is missing. Light surface wear on aluminum base.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$200.00Was: $400.00 -
Ultratech Stepper 0556-7003423 Cable Jumper Rev C Semiconductor Lithography
Ultratech Stepper
$75.00Was: $150.00Ultratech Stepper 0556-7003423 Cable Jumper Rev C Semiconductor LithographyCable jumper assembly for Ultratech stepper photolithography systems. Connects control and signal pathways within...30147- SKU:
- 30147
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Ultratech
- Model:
- 0556-7003423
- MPN:
- 0556-7003423
- Secondary Model:
- 0556-700342
- Revision:
- Rev C
- Type:
- Cable Jumper / Wiring Harness
- Compatible With:
- Ultratech Stepper Photolithography Systems
- Connector Type 1:
- Circular multi-pin connector (9-pin, gold contacts)
- Connector Type 2:
- Dual inline multi-pin housing (white + red keyed)
- Cable Jacket:
- Black braided sleeving
- Application:
- Semiconductor wafer stepper / photolithography
- SKU:
- 30147
- Seller Notes:
- New open-box cable jumper; may be out of original packaging.
- Country/Region of Manufacture:
- United States
- Form Factor:
- Cable / Harness
- Condition Notes:
- Ultratech Stepper 0556-7003423 Cable Jumper is new and unused, may be out of original packaging. All connectors intact, no installation or use. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
Ultratech Stepper 0509-285400 Rev A Cable Extension Ribbon Semiconductor Litho
Ultratech Stepper
$60.00Was: $125.00Ultratech Stepper 0509-285400 Rev A Cable Extension Ribbon Semiconductor LithoIDC ribbon cable extension for Ultratech Stepper photolithography systems. This component extends cable runs within...26616- SKU:
- 26616
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- UltraTech Stepper
- Model:
- 0509-285400
- MPN:
- 0509-285400
- Revision:
- Rev A
- Type:
- Ribbon Cable Extension
- Description:
- Cable Extended Length (CBL Extnd Leng)
- SKU:
- 26616
- Condition:
- New – Original Sealed Bag
- Compatible With:
- Ultratech Stepper photolithography systems
- Connector Type:
- IDC ribbon cable connector
- Application:
- Semiconductor wafer photolithography
- Country/Region of Manufacture:
- United States
- Seller Notes:
- New in original Ultratech Stepper sealed bag with QC inspection label
- Condition Notes:
- Ultratech Stepper 0509-285400 Rev A cable extension. New and unused in original sealed bag. QC label dated 8/2/93; bag seal intact. No wear or damage.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$60.00Was: $125.00 -
Ultratech Stepper 01-15-04325 Rev A Fiber Optic Cable WAS Semiconductor Stepper
Ultratech Stepper
$85.00Was: $175.00Ultratech Stepper 01-15-04325 Rev A Fiber Optic Cable WAS Semiconductor StepperFiber optic cable assembly for Ultratech Stepper photolithography systems. This component transmits optical signals...26615- SKU:
- 26615
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- UltraTech Stepper
- Model:
- 01-15-04325
- MPN:
- 01-15-04325
- Type:
- Fiber Optic Cable
- Part Name:
- Cable Fiber Optic WAS
- Revision:
- Rev A
- QC Audit Date:
- 12/7/95
- Audited By:
- Mercy
- Quantity:
- 1
- Compatible With:
- Ultratech Stepper Photolithography Systems
- Application:
- Semiconductor Wafer Stepper
- SKU:
- 26615
- Condition:
- New – Old Stock (Open Box)
- Seller Notes:
- New from manufacturer; stored in original anti-static bag. QC audited.
- Condition Notes:
- Ultratech Stepper 01-15-04325 Rev A Fiber Optic Cable WAS — new old stock, sealed in original anti-static bag. QC audited 12/7/95, never installed. In storage since manufacture.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$85.00Was: $175.00 -
GE Fanuc IC620MDR028A Bodine FPM Liquid Chemical Mixing Station 42A5BEPM
GE Fanuc Bodine Bridge
$1,100.00Was: $2,200.00GE Fanuc IC620MDR028A Bodine FPM Liquid Chemical Mixing Station 42A5BEPMIndustrial liquid chemical mixing station featuring a GE Fanuc programmable controller and Bodine geared motor. Equipped with a...22518- SKU:
- 22518
- Availability:
- Usually ships within 3-5 business days due to size and freight requirements.
- Weight:
- 215.00 LBS
- Brand:
- GE Fanuc
- Model:
- IC620MDR028A
- Secondary Model:
- 42A5BEPM
- MPN:
- IC620MDR028A
- SKU:
- 22518
- Type:
- Liquid Chemical Mixing Station
- Condition:
- Used – Inspected
- Controller:
- GE Fanuc IC620MDR028A Programmable Controller
- Torque Controller:
- Bodine FPM Adjustable Torque Controller
- Drive / Action Pack:
- Bridge Action Pack 480, P/N LR42272
- Motor:
- Bodine 42A5BEPM-GB, 1/4 HP, 190:1 Ratio, 10 RPM
- Motor Torque Rating:
- 300 Lb-In
- Motor Horsepower:
- 1/4 HP
- Motor Speed:
- 10 RPM
- Gear Ratio:
- 190:1
- Container Capacity:
- Approx. 10 Gallon (removable)
- Frame Construction:
- Heavy Steel, Stainless Clad
- Mobility:
- Mounted on Casters
- Chemical Connections:
- External IN and OUT / RETURN chemical flow ports
- Control Panel Features:
- Power On/Off, Motor Run, Alarm Silence, Emergency Power Off
- Alarm Stack Light:
- Red/Yellow Tower Alarm Stack (Low Level, No Rotation)
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Includes GE Fanuc PLC, Bodine FPM torque controller, Bridge Action Pack, motor, ~10-gal removable container, stainless frame on casters
- Condition Notes:
- GE Fanuc IC620MDR028A Bodine FPM Chemical Mixing Station — inspected and in good used condition. Frame, controls, PLC, drive, motor, removable container, and casters all present. Some fluid residue in motor bay. Contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$1,100.00Was: $2,200.00 -
Bellco Biotechnology 7765-46065 SCI ERA Precision Magnetic Stirrer 2-100 RPM
Bellco Biotechnology
$75.00Was: $150.00Bellco Biotechnology 7765-46065 SCI ERA Precision Magnetic Stirrer 2-100 RPM 110VTwo-station benchtop magnetic stirrer designed for laboratory mixing and cell culture applications. Operates at...19712- SKU:
- 19712
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 25.00 LBS
- Brand:
- Bellco Biotechnology
- Model:
- 7765-46065
- MPN:
- 7765-46065
- Type:
- Precision Magnetic Stirrer
- Product Line:
- SCI ERA
- SKU:
- 19712
- Speed Range:
- 2–100 RPM
- Voltage:
- 110V AC
- Frequency:
- 60 Hz
- Current:
- 0.5 A (per station)
- Power Requirements:
- 110V AC / 60Hz, 0.5A per station
- Number of Stations:
- 2
- Form Factor:
- Benchtop
- Condition:
- As-Is / For Parts or Not Working
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Does not power on; drive belts no longer intact. Sold for parts or repair.
- Application / Use Case:
- Laboratory mixing, cell culture, biological assays
- Compatible With:
- Standard laboratory stir plates and magnetic stir bars
- Condition Notes:
- Bellco Biotechnology 7765-46065 SCI ERA Magnetic Stirrer does not power on; drive belts missing. Sold as-is for parts or repair. Not tested, no functionality guaranteed. View photos and contact us.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
Hybritech Photon ERA-QA Automated Immunoassay Analyzer 120/240V 500W For Parts
Hybritech
$275.00Was: $550.00Hybritech Photon ERA-QA Automated Immunoassay Analyzer 120/240V 500W For PartsBenchtop automated immunoassay analyzer manufactured by Unipath Co. under the Hybritech brand. Designed for clinical...19688- SKU:
- 19688
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 225.00 LBS
- Brand:
- Hybritech
- Model:
- Photon ERA-QA
- MPN:
- PHOTON ERA
- Type:
- Automated Immunoassay Analyzer
- SKU:
- 19688
- Manufacturer:
- Unipath Co.
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Includes internal fluid/reagent containers visible in photos. Sold as-is.
- Country/Region of Manufacture:
- United States
- Power Requirements:
- 120/240V AC, 50/60Hz
- Voltage:
- 120/240V
- Wattage:
- 500W
- Amperage:
- 5A / 2.5A
- Frequency:
- 50/60Hz
- Form Factor:
- Benchtop
- Application:
- Clinical Immunoassay Testing / Diagnostic Laboratory
- Analyzer Type:
- Automated Immunoassay Analyzer
- Compatible Reagents:
- Hybritech ERA immunoassay reagent kits
- Condition Notes:
- Hybritech Photon ERA-QA Immunoassay Analyzer inspected, good cosmetic condition. Cannot be tested at our facility — sold strictly for parts or repair only. No functionality guaranteed. Internal fluid containers included. See photos.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$275.00Was: $550.00 -
Waters Millipore 712 WISP Automatic Sample Injection System w/ Cooling Module
Waters Millipore
$325.00Was: $650.00Waters Millipore 712 WISP Automatic Sample Injection System w/ Cooling ModuleBenchtop autosampler for Waters HPLC systems designed to automate liquid sample injection in chromatography workflows. The...19687- SKU:
- 19687
- Availability:
- Usually ships within 3-5 business days via freight carrier.
- Weight:
- 250.00 LBS
- Brand:
- Waters
- Model:
- 712 WISP
- MPN:
- 712 WISP
- Type:
- Automatic Sample Injection System / HPLC Autosampler
- SKU:
- 19687
- Condition:
- Used – Inspected
- Seller Notes:
- Includes WISP Cooling Module P/N 19320. Powers on. Freight shipment required.
- Country/Region of Manufacture:
- United States
- Application / Use Case:
- Liquid Chromatography (HPLC) Automated Sample Injection
- Compatible With:
- Waters HPLC Systems, Liquid Chromatography Systems
- Included Accessories:
- WISP Cooling Module P/N 19320 (115V, 4.5A, 428VA, 60Hz)
- Cooling Module Part Number:
- 19320
- Cooling Module Voltage:
- 115V
- Cooling Module Power:
- 428 VA max
- Cooling Module Current:
- 4.5A
- Cooling Module Frequency:
- 60 Hz
- Frequency:
- 60 Hz
- Form Factor:
- Benchtop / Floor-Standing (two-unit stacked)
- Dimensions:
- 26" W x 24" D x 21" H (approximate, WISP unit only)
- Front Panel Displays:
- LED: Injection Volume, Sample Number, Run Time, No. of Injections, Equilibration Delay
- Manufacturer Division:
- Waters, Division of Millipore, Milford MA 01757
- Condition Notes:
- Waters 712 WISP Automatic Sample Injection System. Powers on. Inspected, good used condition. Includes WISP Cooling Module P/N 19320. Normal lab wear. Freight shipment required. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$325.00Was: $650.00 -
Dynatech Laboratories Fluorolite 1000 Microplate Fluorometer 100-240V w/
Dynatech Laboratories
$175.00Was: $350.00Dynatech Laboratories Fluorolite 1000 Microplate Fluorometer 100-240V w/ CartridgesBenchtop microplate fluorometer designed for fluorescence measurement in 96-well plate assays. Features dual filter...19678- SKU:
- 19678
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 49.00 LBS
- Brand:
- Dynatech Laboratories
- Model:
- Fluorolite 1000
- MPN:
- Fluorolite 1000
- Type:
- Microplate Fluorometer
- SKU:
- 19678
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Includes emission filter (450nm), excitation filter (365nm), and Program Cartridge Rev 2.00
- Country/Region of Manufacture:
- United States
- Form Factor:
- Benchtop
- Power Requirements:
- 100-120V / 220-240V AC, 50/60Hz, 175VA
- Fuse:
- SLO-BLO T2.0A (100-120V) / T1.0A (220-240V)
- Emission Filter Wavelength:
- 450 nm
- Excitation Filter Wavelength:
- 365 nm
- Program Cartridge Revision:
- Rev 2.00
- Interface:
- RS-232 V24 Data Port; Printer Port
- Application / Use Case:
- Microplate fluorescence measurement, 96-well plate assays
- U.S. Patent:
- 4,501,790
- Manufacturer Address:
- Dynatech Laboratories, Inc., Chantilly, VA 22021
- Condition Notes:
- Dynatech Fluorolite 1000 Microplate Fluorometer sold as-is for parts or repair. Unit powers on but has not been tested for functionality. Functional status unknown; may be missing parts. No guarantee of operation.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$175.00Was: $350.00 -
Symyx Technologies S14100 Crystallizer CE Robot Crystallization Workstation 208V
Symyx Technologies
$10,330.00Was: $100,000.00Symyx Technologies S14100 Crystallizer CE Robot Crystallization Workstation 208V Automated robotic crystallization workstation designed for combinatorial chemistry and drug discovery applications...45337- SKU:
- 45337
- Availability:
- Usually ships within 5-10 business days — please contact us to arrange freight shipping for this large-format laboratory instrument.
- Weight:
- 2,295.00 LBS
- Brand:
- Symyx Technologies
- Model:
- S14100
- Secondary Model:
- Crystallizer CE
- MPN:
- S14100
- SKU:
- 45337
- Condition:
- Used – Inspected
- Seller Notes:
- Includes fluid delivery system, pumps, CCD camera, power unit, chiller, transformer, and HP PC
- Form Factor:
- Freestanding Cabinet Workstation
- Country of Manufacture:
- United States
- Power Requirements:
- 208/240 VAC, Single Phase, 30A, 50/60 Hz
- Manufacture Date:
- June 2004
- Application / Use Case:
- Automated robotic crystallization; combinatorial chemistry; drug discovery
- Fluid Delivery System:
- Kloehn / Carvo Robotics; Part Nos. 727230B / 726389B
- Robotic Travel (W x D x H):
- 48 in Wide x 12 in Deep x 11 in Tall
- Pumps Included:
- QTY 2 – Monostat E-Series Pumps
- Air Quality Controller:
- Alnor Airguard 405 Controller
- Light Source:
- Cuda Fiberoptics 250W Quartz Halogen, Model I-250
- Camera:
- Hitachi KP-MIAN CCD Camera
- Power Unit:
- NI MID-7602 Power Unit
- Chiller / Recirculator:
- Presto LH45, 230 VAC, 3600 W
- Step-Down Transformer:
- Todd Systems SD-13IEC/10TC; PRI 220-240V; SEC 110-120V
- PC Computer Included:
- HP PC, Part No. SK124UC#ABA
- Certifications:
- CE
- Condition Notes:
- This Symyx Technologies S14100 Crystallizer CE Robotic Crystallization Workstation has been inspected and appears to be in good cosmetic condition. It was pulled from a working environment where it was previously in use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$10,330.00Was: $100,000.00