Electronic Test

Electronic Test

Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.

  • Spirent DLS 90 Wireline Simulator – front-left three-quarter view showing front panel LCD display and channel A indicators Spirent DLS 90 DLS90/26-9.35 – rear-left three-quarter view showing rear panel connectors and IEC power inlet

    Spirent DLS 90 DLS90/26-9.35 Ver 4 Wireline Simulator IEEE 488 RS-232 100-240V

    Spirent

    $273.00
    Was: $550.00
    Spirent DLS 90 DLS90/26-9.35 Ver 4 Wireline Simulator IEEE 488 RS-232 100-240VDSL loop emulator and wireline simulator for testing DSL and xDSL modems in subscriber line environments. Generates...
    50220
    SKU:
    50220
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    13.00 LBS
    Brand:
    Spirent
    Model:
    DLS 90
    MPN:
    DLS90/26-9.35
    Type:
    Wireline Simulator / DSL Loop Emulator
    SKU:
    50220
    Version:
    Version 4
    Manufacturer:
    Consultronics (now Spirent)
    Country/Region of Manufacture:
    Canada
    Power Requirements:
    100-240 VAC, 50-60 Hz, 30 VA Max
    Fuse:
    T 0.25A / 250V Slow Blow
    Interface Type:
    IEEE 488 (GPIB), RS-232 (DCE)
    RS-232 Port:
    RS-232 DCE (DB-25 female), front panel RJ ports
    GPIB Interface:
    IEEE 488 (standard GPIB connector, rear panel)
    Form Factor:
    Rackmount, 1U
    Display:
    Front-panel LCD display
    Ports / Connections:
    Channel A and B: RJ port + terminal block each side
    Certifications:
    CSA SPE-1000, Canadian Electrical Code Part 1, CE
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; no accessories included unless shown in photos.
    Compatible With:
    DSL / xDSL modem and CPE test environments
    Application:
    DSL subscriber loop simulation, telecom R&D, QA testing
    Condition Notes:
    Spirent DLS 90 Wireline Simulator (DLS90/26-9.35 Ver 4) inspected and in good condition. Pulled from a working environment where it was in use and functional. Light surface wear; all visible connectors intact. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $273.00
    Was: $550.00
  • Det Tronics Rexnord Model 880 Gas Detection Monitor mainframe with four monitor modules installed in rack – front panel three-quarter view Det Tronics Model 880 mainframe rack – rear view showing four green PCB monitor boards with terminal blocks and wiring

    Det Tronics Rexnord Model 880 Gas Detection Monitor Mainframe 4-Channel Rack

    Det Tronics

    $325.00
    Was: $650.00
    Det Tronics Rexnord Model 880 Gas Detection Monitor Mainframe 4-Channel Rack Four-channel gas detection monitor mainframe designed for industrial flammable gas monitoring. The unit displays gas...
    50196
    SKU:
    50196
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    40.00 LBS
    Brand:
    Det Tronics
    Model:
    Model 880
    MPN:
    226138-01
    Secondary Model:
    AW Rev B
    SKU:
    50196
    Type:
    Gas Detection Monitor System
    Configuration:
    Mainframe with 4 monitor modules, rack-mounted
    Number of Channels:
    4
    Alarm Types:
    High Alarm, Low Alarm, Trouble
    Display / Indication:
    %LFL (Lower Flammable Limit) scale, 1–8 LED bar
    Controls:
    Reset, Cal. Mode, Manual Select, Channel Number
    Form Factor:
    Rack Mount
    Country/Region of Manufacture:
    United States
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Lot of 4 monitor modules in mainframe rack; sold as-is, cannot be tested
    Application:
    Industrial gas detection and alarm monitoring
    Compatible With:
    Det Tronics / Rexnord Model 880 gas detection system
    PCB Part Number:
    226138-01 AW Rev B (visible on monitor boards)
    Condition Notes:
    This Det Tronics Rexnord Model 880 Gas Detection Monitor — a mainframe containing four Model 880 monitor modules mounted in a rack — is being sold AS-IS for parts or repair.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $325.00
    Was: $650.00
  • GasTech 3220 HS GasTechtor portable gas monitor — angled front-left view showing yellow enclosure, LCD display panel, carry handle, and side fittings GasTech 3220 HS GasTechtor gas monitor — right-side view showing LCD display at top and locking connector with bead chain at lower left

    GasTech 3220 HS GasTechtor Portable Gas Monitor LEL OXY H2S Intrinsically Safe

    GasTech, Inc.

    $100.00
    Was: $200.00
    GasTech 3220 HS GasTechtor Portable Gas Monitor LEL OXY H2S Intrinsically Safe Handheld tri-gas monitor designed to detect combustible gases (LEL), oxygen levels, and hydrogen sulfide. Features...
    50193
    SKU:
    50193
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    8.60 LBS
    Brand:
    GasTech
    Model:
    3220 HS
    MPN:
    3220 HS
    Type:
    Portable Tri-Gas Monitor / Combustion Analyzer
    SKU:
    50193
    Gases Detected:
    LEL (Combustibles), Oxygen (%OXY), H2S (PPM)
    Display Type:
    LCD — simultaneous %LEL, %OXY, PPM H2S readout
    Safety Rating:
    Intrinsically Safe
    Form Factor:
    Portable / Handheld with Carry Handle
    Analyzer Type:
    Computer Controlled Combust/Oxy/Toxic Analyzer
    Country/Region of Manufacture:
    United States
    Manufacturer Location:
    Newark, CA 94560 USA
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold as-is and untested. Unit only — no accessories confirmed included.
    Condition Notes:
    This GasTech 3220 HS GasTechtor portable gas monitor is being sold as-is and has not been tested at our facility — no functionality is guaranteed. The unit presents in fair cosmetic condition overall: the yellow enclosure shows scuffing, paint
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $100.00
    Was: $200.00
  • Lorain MZHSA15CAB Modular DC-DC Converter rear three-quarter view showing gold heatsink fins and ventilation slots Lorain MZHSA15CAB Modular DC-DC Converter front three-quarter view showing heatsink array and module slots

    Lorain MZHSA15CAB Modular DC-DC Converter -48V 15A w/ 4x MZHSA3B Modules

    Lorain

    $95.00
    Was: $200.00
    Lorain MZHSA15CAB Modular DC-DC Converter -48V 15A w/ 4x MZHSA3B ModulesModular DC-DC converter power supply manufactured by Reliance Electric Co. Converts +/-24VDC input to -48VDC output. Rack-mount...
    50182
    SKU:
    50182
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    25.00 LBS
    Brand:
    Lorain
    Model:
    MZHSA15CAB
    MPN:
    MZHSA15CAB
    Secondary Model:
    MZHSA3B
    Spec Number:
    5882-406
    Module Spec Number:
    4868-846-00
    SKU:
    50182
    Type:
    Modular DC-DC Converter Power Supply
    Condition:
    Used – Pulled from Working Environment
    DC Input Voltage:
    +/-24VDC
    DC Input Current (Max):
    45A Max
    DC Output Voltage:
    -48VDC
    DC Output Current (Max):
    15A Max
    Module Input Voltage:
    +24VDC, 9A
    Module Output Voltage:
    -48VDC, 3A
    Number of Modules:
    4
    Module Model:
    MZHSA3B
    Manufacturer:
    Reliance Electric Co., Lorain, Ohio
    Country/Region of Manufacture:
    United States
    Form Factor:
    Rack Mount
    Seller Notes:
    Includes chassis (MZHSA15CAB) with 4x MZHSA3B DC-DC converter modules installed.
    Condition Notes:
    This Lorain MZHSA15CAB Modular DC-DC Converter was pulled from a working environment and inspected. Includes 4x MZHSA3B modules. Shows light wear consistent with normal use. Good overall condition.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $95.00
    Was: $200.00
  • Unbranded 5-pin DIN extension cable 25 ft gray coiled spool, full cable view 5-pin DIN male connector close-up showing five pins and metal housing on gray cable

    5-Pin DIN Extension Cable 25 ft Male to Female Data Spool Cord Unbranded

    Generic

    $15.00
    Was: $30.00
    5-Pin DIN Extension Cable 25 ft Male to Female Data Spool Cord UnbrandedSingle extension cable with 5-pin DIN connectors, 25 feet in length on coiled spool. Connects male DIN devices to female...
    50070
    SKU:
    50070
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Unbranded
    Model:
    5-Pin DIN Extension Cable 25 ft
    Type:
    DIN Extension Cable
    Connector Type:
    5-Pin DIN Male to Female
    Cable Length:
    25 ft (25 Feet)
    Number of Pins:
    5
    Gender:
    Male to Female
    Cable Color:
    Gray
    SKU:
    50070
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Single 5-pin DIN male-to-female extension cable, 25 ft coiled spool
    Condition Notes:
    Unbranded 5-pin DIN extension cable, 25 ft, inspected and in good used condition. Pulled from a working environment. Cable jacket shows surface grime and minor scuffing. Both connectors intact, pins present.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $15.00
    Was: $30.00
  • 200ft gray 5-pin data extension cable wound on orange spool — top view with carry handle 200ft gray 5-pin extension cable on orange spool — side profile showing full cable wrap

    200ft 5-Pin Male Female Extension Data Cable on Orange Spool 60M Gray

    Unbranded

    $55.00
    Was: $100.00
    200ft 5-Pin Male Female Extension Data Cable on Orange Spool 60M Gray5-pin circular connector extension cable rated for industrial and telecom data applications. This male-to-female configuration...
    50069
    SKU:
    50069
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    11.00 LBS
    Brand:
    Unbranded
    Model:
    5-Pin Male/Female Extension Data Cable
    Type:
    Data Extension Cable
    Connector Type:
    5-Pin Circular (Male / Female)
    Cable Length:
    200 ft (approx. 60 m)
    Cable Color:
    Gray
    Includes:
    Orange cable storage spool with handle
    Gender:
    Male to Female
    Number of Pins:
    5
    SKU:
    50069
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes orange storage spool; 5-pin male and female connectors on each end
    Condition Notes:
    200ft 5-pin male/female data cable inspected and in good used condition. Pulled from a working environment. Gray jacket shows light normal wear; connectors intact. Orange spool included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $55.00
    Was: $100.00
  • Deltron W109B open frame linear power supply – front label view showing model matrix, serial number 946943, and CSA marking Deltron W109B open frame linear power supply – top/side view showing transformer, clear cover, control PCB, and assembled-in-Mexico label

    Deltron W109B 15VDC 3A Single Output Open Frame Linear Power Supply 100-240VAC

    $55.00
    Was: $100.00
    Deltron W109B 15VDC 3A Single Output Open Frame Linear Power Supply 100-240VACOpen frame linear power supply delivering 15V DC at 3.0A output. Accepts universal input voltage 100-240V AC with...
    50061
    SKU:
    50061
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    8.00 LBS
    Brand:
    Deltron
    Model:
    W109B
    MPN:
    W109B
    Type:
    Open Frame Linear Power Supply
    SKU:
    50061
    Series:
    W Series (World Series Linears)
    Output Voltage:
    15V DC
    Output Current:
    3.0A
    Number of Outputs:
    1
    Input Voltage:
    100/120/220/230/240V AC (universal)
    Input Current:
    1.17/0.98/0.54/0.49/0.49A (by voltage tap)
    Input Frequency:
    47–53Hz / 57–63Hz
    Power Requirements:
    100-240V AC, 47-63Hz
    Topology:
    Linear (transformer-based)
    Form Factor:
    Open Frame
    Output Connection:
    Hardwired leads / terminal block
    Input Connection:
    Hardwired leads (voltage tap jumper configurable)
    Voltage Tap Configuration:
    Jumper-selectable: 100/120/220/230/240V AC
    Current Configuration Note:
    Derate output amps by 10% for 47-53Hz operation
    Component Type:
    Custom Rectifier
    Certifications:
    CSA (visible on label)
    Country/Region of Manufacture:
    Mexico
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Unit tested good at 15.05V DC output. Currently wired for 100/120V AC input.
    Condition Notes:
    Deltron W109B 15VDC 3A open frame linear power supply. Tested good at 15.05V DC output. Currently wired for 100/120V AC input; jumper-configurable for higher voltages. Normal cosmetic wear. Used condition.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $55.00
    Was: $100.00
  • Balzers RFS 302 RF Power Supply – front view of full floor-standing white cabinet enclosure with Balzers nameplate and front panel controls at top Balzers RFS 302 RF Plasma Generator – right-side view of cabinet showing ventilation louvers and electrical warning label, cables on top

    Balzers RFS 302 RF Power Supply 2.5kW 13.56 MHz Plasma Generator 380V 3-Phase

    Balzers

    $1,800.00
    Was: $3,600.00
    Balzers RFS 302 RF Power Supply 2.5kW 13.56 MHz Plasma Generator 380V 3-PhaseRF plasma generator power supply manufactured by Balzers with internal Hüttinger electronics. Supplies 2.5 kW of RF energy...
    50032
    SKU:
    50032
    Availability:
    This item requires freight shipping due to its size and weight. Please contact us for a freight quote or to arrange local pickup.
    Weight:
    1,111.00 LBS
    Brand:
    Balzers
    Model:
    RFS 302
    MPN:
    RFS 302
    Secondary Model:
    TIS 2.5/13560
    Type:
    RF Plasma Generator Power Supply
    SKU:
    50032
    Internal Generator Brand:
    Fritz Hüttinger Elektronik GmbH
    Internal Generator Type:
    TIS 2.5/13560
    Internal Generator Version:
    A 46-0104
    Output Power:
    2500 W (2.5 kW)
    Output Frequency:
    13.56 MHz
    Line Voltage:
    3 x 380V AC
    Phase:
    Three Phase
    Frequency:
    50/60 Hz
    Power Consumption:
    5400 VA
    Input Current:
    8.2 A
    RF Output Connector:
    N-type / coaxial (50 Ohm)
    RF Output Impedance:
    50 Ohm
    Max RF Voltage:
    1000 Vp (per Vorsicht HF-Spannung label)
    Form Factor:
    Floor-Standing Enclosure / Cabinet
    Dimensions:
    27.5" W x 22" D x 53" H
    Front Panel Meters:
    Incident Power (kW), Reflected Power meters
    Front Panel Controls:
    Mains/Standby/Remote switch, RF on/off, Overload indicator, Interlock
    Power Switch:
    Siemens rotary lockout/keyed main disconnect
    Internal Power Supply Module:
    Hüttinger Netzteil Typ B 66-0015
    Internal RF Unit:
    Hüttinger HF-Teil Typ B 76-0002
    Internal Control Board:
    Hüttinger Typ B 38-0114
    Application:
    RF Plasma Etching, Sputtering, CVD, PVD Semiconductor
    Cooling:
    Forced air (internal axial fans visible)
    Country/Region of Manufacture:
    West Germany
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold AS-IS. Freight shipping required — contact us for quote or local pickup.
    Condition Notes:
    Balzers RFS 302 RF Plasma Generator Power Supply sold AS-IS, untested, for parts or repair. Not powered or tested at our facility. Freight shipping required — contact us for a quote or local pickup.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $1,800.00
    Was: $3,600.00
  • Balzers RFS 302 RF Power Supply – front view showing control panel, key switch, and analog meters with cables on top Balzers RFS 302 RF Power Supply – rear/side view showing ventilation panels and lower cable compartment

    Balzers RFS 302 RF Power Supply 2.5kW 13.56 MHz Plasma Hüttinger TIS 2.5/13560

    Balzers

    $2,500.00
    Was: $5,000.00
    Balzers RFS 302 RF Power Supply 2.5kW 13.56 MHz Plasma Hüttinger TIS 2.5/13560RF power supply and plasma generator for industrial semiconductor and materials processing. Delivers 2.5 kW at 13.56 MHz...
    50029
    SKU:
    50029
    Availability:
    This item requires freight shipping due to its size and weight. Please contact us for a freight quote or to arrange local pickup.
    Weight:
    495.00 LBS
    Brand:
    Balzers
    Model:
    RFS 302
    MPN:
    BG M34 563 / 0157
    Secondary Model:
    TIS 2.5/13560
    Type:
    RF Power Supply / Plasma Generator
    SKU:
    50029
    Seller Notes:
    Includes RF output cables and associated cabling visible on top of unit
    Country/Region of Manufacture:
    Germany
    Form Factor:
    Floor-Standing Cabinet
    Output Power:
    2500 W (2.5 kW)
    Output Frequency:
    13.56 MHz
    Input Voltage:
    3 x 380V AC (Three-Phase)
    Phase:
    Three Phase
    Input Frequency:
    50/60 Hz
    Power Consumption:
    5400 VA
    Current Rating:
    8.2 A
    RF Generator Manufacturer:
    Fritz Hüttinger Elektronik GmbH
    RF Generator Type:
    TIS 2.5/13560
    RF Generator Version:
    A 46-0104
    Cooling:
    Water-cooled and fan-cooled
    Cooling Water Flow Min:
    6 l/min
    Cooling Water Pressure:
    7 bar nominal / max
    Front Panel Meters:
    Incident Power Pi (0-2.5 kW), Reflected Power Pr (0-500 W)
    Front Panel Controls:
    Key switch, Mains/Standby/Remote indicators, RF on/off, Overload reset
    Overload Indicators:
    Interlock, T>, Pr>, I>
    Output Connector:
    Coaxial (N-type / threaded RF output)
    Max RF Voltage (Output):
    Up to 1000 Vp
    Application:
    Plasma Etch, PVD Sputtering, CVD, Semiconductor
    Dimensions:
    27.5" W x 22" D x 52.25" H
    Condition:
    Used – Pulled from Working Environment
    Condition Notes:
    Balzers RFS 302 RF Power Supply inspected and in good used condition. Cabinet and internals intact; Fritz Hüttinger TIS 2.5/13560 module present. Cables included. Freight shipping required — contact us for a quote.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $2,500.00
    Was: $5,000.00
  • HP 8551A Spectrum Analyzer RF Section front panel — three-quarter view showing analog meter, frequency and attenuator knobs on gray chassis HP 8551A Spectrum Analyzer RF Section rear panel — showing fan, ventilation grille, and rear connector area with coaxial cables

    HP 8551A Spectrum Analyzer RF Section 10 MHz-10 GHz 115/230V For Parts

    HP

    $297.00
    Was: $1,600.00
    HP 8551A Spectrum Analyzer RF Section 10 MHz-10 GHz 115/230V For Parts The HP 8551A is a vintage spectrum analyzer RF section designed for direct RF measurement and analysis from 10 MHz to 10 GHz...
    50027
    SKU:
    50027
    Availability:
    This item requires freight shipment or local pickup due to its size and weight — please contact us to arrange shipping before ordering.
    Weight:
    155.00 LBS
    Brand:
    HP
    Model:
    8551A
    MPN:
    8551A
    Type:
    Spectrum Analyzer RF Section
    SKU:
    50027
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Powers on to STANDBY only. No power cord included. Freight or local pickup required.
    Country/Region of Manufacture:
    United States
    Form Factor:
    Benchtop
    Power Requirements:
    115/230V, 50/60Hz
    Frequency Range:
    10 MHz to 10 GHz (direct coaxial input)
    Extended Frequency Range:
    8.2 to 40 GHz with external waveguide mixers
    Input Type:
    Direct single coaxial; external waveguide mixers
    Measurement Type:
    RF Spectrum Analysis
    Front Panel Controls:
    Frequency, Spectrum Width, Frequency Tuning, Attenuator, Sensitivity, Signal Identifier
    Rear Panel Outputs:
    LO Output (50 ohm), 2GC IF Input, 2GC Output (Input/Output), 200MC Output
    Fuse Rating:
    0.5A SB / 3A SB (visible on rear panel)
    Switched Line Output:
    Present on rear panel
    Dimensions:
    18.5" W x 16.75" D x 12.50" H
    Era / Vintage:
    1960s
    Condition Notes:
    This HP 8551A Spectrum Analyzer RF Section is being sold AS-IS for parts or repair. When powered, the unit advances only to the STANDBY indicator — no fans spin and no additional lights or displays activate.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $297.00
    Was: $1,600.00
  • FLW Newport Q2000FVR2 AC Voltmeter Panel Meter – front-left angle view showing LED display and 96-30M2 label FLW Newport Q2000FVR2 AC Voltmeter Panel Meter – rear-left angle showing screw terminal block with AC N RMS labels and rating label

    FLW Newport Q2000FVR2 AC Voltmeter Panel Meter 1/8 DIN 120VAC RMS 5W

    Newport

    $75.00
    Was: $150.00
    FLW Newport Q2000FVR2 AC Voltmeter Panel Meter 1/8 DIN 120VAC RMS 5WAn AC voltmeter panel meter designed for industrial and telecom equipment. Measures AC voltage RMS with a red LED 7-segment display...
    49974
    SKU:
    49974
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    FLW
    Product Line:
    Newport
    Model:
    Q2000FVR2
    MPN:
    Q2000FVR2
    Secondary Model:
    96-30M2
    SKU:
    49974
    Type:
    AC Voltmeter Panel Meter
    Measurement Type:
    AC Voltage (RMS)
    Input Voltage:
    120VAC
    Power Consumption:
    5W
    Form Factor:
    1/8 DIN Panel Mount
    Display Type:
    LED (Red 7-Segment)
    Rear Connection Type:
    Screw Terminal Block
    Terminal Labels:
    AC, N, DC/AC, COM, AC (RMS)
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Unit only; tested and in working order.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    FLW Newport Q2000FVR2 AC Voltmeter Panel Meter. Tested and in working order. LED display functions. Shows normal wear. Rear screw terminals intact. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • Newport Q2000BCR1 DC Ammeter Panel Meter – front angled view showing LED display and Newport logo Newport Q2000BCR1 Panel Meter – rear terminal block view showing AC, N, ground, and DC signal screw terminals

    Newport Q2000BCR1 DC Ammeter Panel Meter 1/8 DIN 120VAC 5W LED Display

    Newport

    $75.00
    Was: $150.00
    Newport Q2000BCR1 DC Ammeter Panel Meter 1/8 DIN 120VAC 5W LED DisplayThe Newport Q2000BCR1 is a compact 1/8 DIN format DC ammeter panel meter designed for flush panel mounting in industrial and...
    49973
    SKU:
    49973
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    Newport
    Model:
    Q2000BCR1
    MPN:
    Q2000BCR1
    Secondary Model:
    Q2000BVR2
    SKU:
    49973
    Type:
    DC Ammeter Panel Meter
    Form Factor:
    1/8 DIN Panel Mount
    Display Type:
    LED Digital Display
    Measurement Type:
    DC Current (Amperage)
    Power Requirements:
    120VAC, 5W
    Input Power:
    120VAC
    Power Consumption:
    5W
    Panel Cutout Size:
    1/8 DIN
    Terminal Type:
    Screw Terminal
    Condition:
    Used – Inspected and Tested
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Unit powers on and is in good working condition. Sold as shown.
    Condition Notes:
    Newport Q2000BCR1 DC Ammeter Panel Meter powers on and is in good working condition. LED display functions normally. Housing shows typical light wear. Rear screw terminals are clean and intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • Newport Q2000AVR1 DC voltmeter panel meter front-left angle view showing LED display and 96-30M5 label Newport Q2000AVR1 panel meter rear view showing AC power terminal block with AC, N, ground, and signal terminals

    Newport Q2000AVR1 DC Voltmeter Panel Meter 1/8 DIN 96-30M5 120VAC 5W

    Newport

    $75.00
    Was: $150.00
    Newport Q2000AVR1 DC Voltmeter Panel Meter 1/8 DIN 96-30M5 120VAC 5WPanel-mount DC voltmeter with red 7-segment LED display. Measures DC voltage and mounts in 1/8 DIN form factor cutouts on control...
    49972
    SKU:
    49972
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    3.00 LBS
    Brand:
    Newport
    Model:
    Q2000AVR1
    Secondary Model:
    96-30M5
    MPN:
    Q2000AVR1
    SKU:
    49972
    Type:
    DC Voltmeter Panel Meter
    Form Factor:
    1/8 DIN Panel Mount
    Display Type:
    LED (Red 7-Segment)
    Measurement Type:
    DC Voltage
    Power Requirements:
    120VAC, 5W
    Input Power (Volts):
    120 VAC
    Power Consumption:
    5 Watts
    Panel Cutout Size:
    1/8 DIN
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Unit only; tested and in working order.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Newport Q2000AVR1 DC Voltmeter Panel Meter. Tested and in working order — powers on, LED display functional. Housing shows typical used wear; terminal block intact. Please view photos and contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • Fiplex DDBP 1622 12-cavity VHF mobile duplexer – front panel view showing DPLX 101 and ANTI-101 port labels with red dust caps installed Fiplex DDBP 1622 mobile duplexer – rear view showing row of N-type female connectors across the 12 cavity modules with interconnecting cables

    Fiplex DDBP 1622 Mobile Duplexer 12-Cavity 160-219.5 MHz N-Type VHF RF

    Fiplex

    $150.00
    Was: $300.00
    Fiplex DDBP 1622Mobile Duplexer 12-Cavity 160-219.5 MHz N-Type VHF RF12-cavity band-pass duplexer for VHF mobile radio and repeater systems. Operates across 160/171–217/219.5 MHz with N-type female...
    49953
    SKU:
    49953
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    5.00 LBS
    Brand:
    Fiplex
    Model:
    DDBP 1622
    MPN:
    DDBP 1622
    Type:
    12-Cavity Mobile Duplexer
    SKU:
    49953
    Frequency Range:
    160/171 – 217/219.5 MHz
    Number of Cavities:
    12
    Connector Type:
    N-Type (female)
    Port Labels:
    DPLX 101 (duplex), ANTI-101 (antenna x2)
    Filter Type:
    Band Pass Duplexer
    Band:
    VHF
    Form Factor:
    Rackmount
    Application:
    Mobile Radio, Repeater Systems, VHF RF
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; port caps included as shown in photos.
    Country/Region of Manufacture:
    Spain
    Condition Notes:
    Fiplex DDBP 1622 12-cavity VHF mobile duplexer. Inspected, in good used condition. Pulled from a working environment where it was actively in service. N-type connectors intact; port caps included. Normal surface wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00
  • Fiplex TC 25-4B1 TX Combiner system front view showing four cavity columns and dual junction isolators mounted on top Fiplex TC 25-4B1 TX Combiner rear panel view showing enclosure and label area on upper section

    Fiplex TC 25-4B1 TX Combiner LTB 12B2 Dual Junction Isolators 217-219 MHz VHF

    Fiplex

    $3,200.00
    Was: $6,400.00
    Fiplex TC 25-4B1 TX Combiner LTB 12B2 Dual Junction Isolators 217-219 MHz VHFVHF transmitter combiner system designed to combine multiple transmitter signals onto a single antenna feed. Operates...
    49946
    SKU:
    49946
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    70.00 LBS
    Brand:
    Fiplex
    Model:
    TC 25-4B1
    MPN:
    TC 25-4B1
    Secondary Model:
    LTB 12B2
    Type:
    VHF Transmitter Combiner System
    SKU:
    49946
    Frequency Range:
    217.525 – 219.025 MHz
    Frequency Band:
    VHF
    Number of Channels:
    4
    Isolator Model:
    Fiplex LTB 12B2 Dual Junction Isolator (Qty 4)
    Isolator Load 1 Frequency:
    217.525 MHz
    Isolator Load 2 Frequency:
    218.075 MHz
    Isolator Load 3 Frequency:
    218.525 MHz
    Isolator Load 4 Frequency:
    219.025 MHz
    ARS Transmitter Combiner MPN:
    ARS 02-CMO-TXCM-101 (Qty 4)
    ARS Cavity Filter MPN:
    ARS 821-171-01
    Manufacturer:
    Fiplex Electromagnetic Devices
    Compatible With:
    Land mobile radio, VHF multi-transmitter sites
    Form Factor:
    Floor-standing / Cabinet
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes 4x TC 25-4B1 TX Combiners, 4x LTB 12B2 Isolators, ARS combiners and cavity filters
    Condition Notes:
    Fiplex TC 25-4B1 VHF TX Combiner system inspected and in good used condition. Pulled from a working environment. All isolator modules, ARS combiners, and cavity filters present. Normal field wear. Contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $3,200.00
    Was: $6,400.00
  • Kurz Instruments K-BAR 2000B multipoint insertion mass flow meter — full assembly showing blue electronics enclosure and 34-inch stainless steel probe with red and yellow banding markers, viewed from front-left Kurz K-BAR 2000B mass flow meter element — full side view of complete assembly laid flat, electronics enclosure on right and probe tip visible on left with safety banding

    Kurz K-BAR 2000B Multipoint Insertion Mass Flow Meter 34" Probe C-276

    Kurz Instruments

    $3,500.00
    Was: $7,000.00
    Kurz K-BAR 2000B Multipoint Insertion Mass Flow Meter 34" Probe C-276Thermal mass flow meter element for insertion into ducts and stacks. Measures gas velocity and flow using multipoint averaging...
    49945
    SKU:
    49945
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    40.00 LBS
    Brand:
    Kurz Instruments
    Model:
    K-BAR 2000B
    MPN:
    K-BAR2000B
    Secondary Model:
    K-BAR 2000B-16
    Part Number:
    170276 Rev. B
    DCN / Publication Number:
    DCN 360211 Rev. D
    Type:
    Multipoint Insertion Thermal Mass Flow Meter Element
    SKU:
    49945
    Probe Length:
    34 inches
    Sensor Material:
    C-276 alloy, all-welded construction (standard)
    Sensor Support Material:
    316L stainless steel (standard)
    Sensor Support Diameter Seg 1:
    1-1/2" tubing (standard)
    Sensor Support Diameter Seg 2:
    2-1/2" (Sch. 10)
    Sensor Support Diameter Seg 3:
    4" (Sch. 10)
    Velocity Range:
    0–12,000 SFPM (0–56 NMPS)
    Velocity Accuracy:
    ±(1% of reading + 20 SFPM); 0.25% reading (cal)
    Electronics Operating Temp Range:
    -40°C to +50°C (K-BAR2000B); -40°C to +65°C (B-16)
    Sensor Element Max Temp (HT):
    70°C above process temp; max sensor +55°C (std)
    Max Sensor Temp (HT option):
    250°C
    Power Requirements:
    24 VDC, 3.5 A
    Enclosure Rating:
    N4, IP65
    Hazardous Area Rating:
    EEx nA II T-CODE X; Class I, Division 2 or Zone 2
    Output:
    Analog 4–20 mA; digital network
    Firmware Version:
    B-Series Firmware Version 2.x
    Application:
    Combustion control, emissions monitoring, duct flow
    Measurement Type:
    Multipoint averaging thermal mass flow velocity
    Flow Computer Compatibility:
    Kurz 155 Flow Computer
    Interface:
    Modbus, USB, MFIB HART
    Country/Region of Manufacture:
    United States
    Manufacturer Location:
    Monterey, California
    Form Factor:
    Insertion / Duct-Mount with External Electronics Enclosure
    Seller Notes:
    New in non-original open box. Probe and electronics enclosure included.
    Condition:
    New – Open Box (non-original packaging)
    Condition Notes:
    Kurz K-BAR 2000B Multipoint Insertion Mass Flow Meter is new and unused, in non-original open box. Probe and electronics enclosure included. No signs of use or wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $3,500.00
    Was: $7,000.00
  • Acopian RD24M13A Regulated Power Supply – front panel with terminal strip and Acopian label Acopian RD24M13A Regulated Power Supply – top and side view showing vented brass chassis with green Accepted sticker

    Acopian RD24M13A Regulated AC/DC Power Supply 24VDC 13A 120VAC For Parts

    Acopian

    $40.00
    Was: $80.00
    Acopian RD24M13A Regulated AC/DC Power Supply 24VDC 13A 120VAC For Parts The Acopian RD24M13A is a single-output regulated AC/DC power supply rated at 24 VDC and 13 amps, housed in a vented...
    49902
    SKU:
    49902
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    14.00 LBS
    Brand:
    Acopian
    Model:
    RD24M13A
    MPN:
    RD24M13A
    Type:
    Regulated AC/DC Power Supply
    SKU:
    49902
    Output Voltage:
    24 VDC
    Output Current:
    13 A
    Input Voltage:
    120 VAC
    Number of Outputs:
    1
    Output Terminals:
    +OUT, -OUT, SENS+, SENS-, AC, AC, GND
    Form Factor:
    Benchtop / Chassis Mount
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold AS-IS for parts or repair. Output voltage reads approx. 2.5–5 VDC.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    This Acopian RD24M13A Regulated AC/DC Power Supply is being sold AS-IS for parts or repair. The unit is not fully functional — when measured, the output voltage reads approximately 2.5–5 VDC rather than the rated 24 VDC, indicating a fault in the
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $40.00
    Was: $80.00
  • Xicom Technology 38U 19in rackmount cabinet — right-side open view showing internal rack rails, cabling, and top fan assembly Xicom Technology 38U rackmount cabinet — left-side open view showing internal rack structure, dual top fans, and floor castors

    Xicom Technology 38U 19in Rackmount Cabinet Enclosure 36x24x73 w/ Cooling Fans

    Varian

    $700.00
    Was: $2,500.00
    Xicom Technology 38U 19in Rackmount Cabinet Enclosure 36x24x73 w/ Cooling FansFloor-standing 38U rackmount cabinet designed to house and organize telecom, network, and industrial equipment. Measures...
    49873
    SKU:
    49873
    Availability:
    This item ships via freight service — please contact us for a shipping quote before purchasing.
    Weight:
    415.00 LBS
    Brand:
    Xicom Technology
    Model:
    38U 19in Rackmount Cabinet
    MPN:
    734-0221-003
    Type:
    Rackmount Enclosure Cabinet
    SKU:
    49873
    Rack Units:
    38U
    Rack Width:
    19 in
    Overall Dimensions:
    36 in W x 24 in D x 73 in H
    Form Factor:
    Free-Standing, Floor Cabinet
    Cooling:
    Dual top-mounted fans (internal)
    Castors / Wheels:
    Yes — castors visible in photos
    Internal Cabling:
    Included — multiple cable assemblies present
    PDU / Power Strips:
    2x internal IEC PDU strips (visible in photos)
    Connector Types Included:
    HD-50 / DB-style multi-pin cables, IEC C13 PDU
    Internal Part Number:
    734-0221-003 Rev B
    Seller Notes:
    Includes internal cabling, dual cooling fans, 2x IEC PDU strips, and castors
    Condition:
    Used – Inspected
    Country/Region of Manufacture:
    United States
    Condition Notes:
    This Xicom Technology 38U 19in rackmount cabinet has been inspected and is in good used condition. Includes dual cooling fans, 2x IEC PDU strips, internal cabling, and castors. Ships freight only. ~368 lbs.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $700.00
    Was: $2,500.00
  • Varian VZC6967R4 40U 19-inch rackmount cabinet – left side view with door open showing interior rail space and mounted PDU Varian VZC6967R4 40U rackmount cabinet enclosure – right side three-quarter view with door open showing slide rails and interior

    Varian VZC6967R4 19" 40U Rackmount Cabinet Enclosure 31.5x24x76" w/ PDU

    Varian

    $600.00
    Was: $2,500.00
    Varian VZC6967R4 19" 40U Rackmount Cabinet Enclosure 31.5x24x76" w/ PDUThe Varian VZC6967R4 is a heavy-duty 19-inch 40U free-standing rackmount cabinet enclosure manufactured by Varian Microwave...
    49872
    SKU:
    49872
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    340.00 LBS
    Brand:
    Varian
    Model:
    VZC6967R4
    MPN:
    VZC6967R4
    Type:
    19" 40U Free-Standing Rackmount Cabinet Enclosure
    SKU:
    49872
    Seller Notes:
    Includes internal PDU power strip, slide rails, and casters/wheels
    Country/Region of Manufacture:
    United States
    Form Factor:
    Free-Standing Rackmount
    Rack Size:
    40U
    Rack Width:
    19 inch (EIA standard)
    Overall Dimensions:
    31.5" W x 24" D x 76" H
    Included Accessories:
    Internal PDU power strip, slide rails, casters
    Cabinet Type:
    Cabinet Assembly
    Condition:
    Used – Inspected and in Good Condition
    Condition Notes:
    Varian VZC6967R4 19" 40U rackmount cabinet inspected and in good used condition. Interior includes slide rails, 6-outlet PDU strip, and terminal block. Minor cosmetic wear. Casters installed. Please contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $600.00
    Was: $2,500.00
  • 44U 19-inch free-standing rackmount cabinet enclosure – left-side front view showing open frame and vertical rack rails 44U 19-inch rackmount cabinet enclosure – right-side front view showing full height with casters at base and two-section interior

    44U 19-Inch Rackmount Cabinet Enclosure 31.5x23x83 Free-Standing w/ Wiring Duct

    Industrial

    $450.00
    Was: $1,200.00
    44U 19-Inch Rackmount Cabinet Enclosure 31.5x23x83 Free-Standing w/ Wiring DuctFree-standing 44U rackmount cabinet designed to house standard 19-inch EIA-310 equipment. Accommodates 44 rack units of...
    49871
    SKU:
    49871
    Availability:
    This item requires freight shipping due to its size and weight. Please contact us for a freight quote, local pickup, or to schedule a facility viewing.
    Weight:
    250.00 LBS
    Brand:
    Unbranded
    Model:
    44U 19-Inch Rackmount Cabinet
    Type:
    Free-Standing Rackmount Cabinet Enclosure
    SKU:
    49871
    Condition:
    Used – Inspected
    Rack Size:
    44U
    Rack Width:
    19 Inch (Standard EIA-310)
    Form Factor:
    Free-Standing Floor Cabinet
    Overall Dimensions:
    31.5" W x 23" D x 83" H
    Included Accessories:
    Integrated wiring duct, two built-in power outlets
    Casters / Wheels:
    Casters visible in photos (original listing states not installed)
    Cable Management:
    Vertical wiring duct (3x2, Wiley brand) installed inside
    Power:
    Two built-in power outlets at base (NEMA 5-15R style)
    Color:
    Light Gray / Off-White
    Compatible With:
    Standard 19-inch EIA-310 rackmount equipment
    Seller Notes:
    Includes integrated wiring duct and two built-in power outlets at base
    Condition Notes:
    This 44U 19-inch rackmount cabinet has been inspected and is in good condition. Rails intact, wiring duct and built-in power outlets present. Exterior shows normal wear and scuffing. Freight shipping required. Contact us for a quote.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $450.00
    Was: $1,200.00