Description
CTI Cryodyne Cryogenic System Cyrostat, Cold Head-Finger, Compressor, 110V Air GM HT Superconductor
Complete closed loop cryogenic system including CTI-Cryogenics Cryodyne Compressor, CTI-Cryogenics Cryodyne Refrigerator w/Cold Head & Cold Finger and Cryogenic Vacuum Chamber w/RF ports and 32 Pin Circular DC Electrical Connector Interface - Ideal for High Temperature Superconductor Lab/Field Applications
CTI-Cryogenics Cryodyne Compressor
Single Stage, Gifford-McMahon (GM) type, 10-12W @ 77 Kelvin Rated to 60 Kelvin at 6 Watts Rated to 30 Kelvin at 0 Watts (No Load) 320-330 Static PSIG, 400 Operating PSIG, 5 SCFM Closed Loop Helium Cryogenic Process CTI PN 8143900G003 Half Rack Mountable
CTI-Cryogenics Cryodyne Refrigerator
Cold Head PN 8143902G001 Half Rack Mountable Supply, Return & Power/Switch Interconnects Flange-Mount Cold Finger Cap Cold Finger Dimensions 5 in. High w/2 1/4 in. Diameter Flange
Cryogenic Vacuum Chamber
Integral Fit w/Cold Head/Cold Finger Assembly Internal Dimensions: 4 7/8th Diameter x 10 7/8 Length External Dimensions: 11 3/8 Length x 6 in. Diameter Two RF Ports & 32 Pin Circular Connector Data Interface in Base Flange-Mount w/Screw Through Hole Cylinder Seal Three Ports for Getters and Vacuum Draw
This cryocooler system was pulled from a superconducting system. The compressor and cryohead is used but has been tested to be in very good condition. As shown in the photos, manuals, and helium cables are included. This rare cryofinger refrigeration system can be previewed at our facility in Ventura, Ca during business hours 8am to 5pm M-F.
View AllClose
Complete closed loop cryogenic system including CTI-Cryogenics Cryodyne Compressor, CTI-Cryogenics Cryodyne Refrigerator w/Cold Head & Cold Finger and Cryogenic Vacuum Chamber w/RF ports and 32 Pin Circular DC Electrical Connector Interface - Ideal for High Temperature Superconductor Lab/Field Applications
CTI-Cryogenics Cryodyne Compressor
CTI-Cryogenics Cryodyne Refrigerator
Cryogenic Vacuum Chamber