Description
Crown D-75 2-Ch Audio Power Amplifier 19" Rackmount Format - As Is / For Parts / Repair. Powers on but does not Amplify.
From the manufacturer:
- Inputs
- Two balanced XLR, 20k (10k if you use only one side for the wrong kind of balanced input).
- Two mono " unbalanced, 25k .
- Input Sensitivity
- 812 mV 2% for 35W into 8.
- Frequency Response
- 20 ~ 20,000 Hz 0.1 dB at 1 watt.
- Phase Response
- 20 ~ 20,000 Hz, +10 -15 at 1 watt.
- Signal to Noise Ratio
- 106 dB below 35 W (15.44 dBW) into 8.
- This is -90.56 dBW or 875 pW or 83.85 V or -81.53 dBV.
- THD
- < 0.001% from 20 ~ 400 Hz from 10 to 250 mW, increasing linearly to 0.05% at 20,000 Hz at 35 W.
- IMD
- < 0.05% from 10 to 250 mW.
- <0.01% from 250 mW to 35 W.
- Slew Rate
- 6 V/S.
- Damping Factor
- > 533 damping factor into 8 .
- 15 m output source impedance.
- Output Connectors
- Lab standard 3/4" spaced 5-way binding posts.
- Designed for standard MDP lab connectors.
- Quality
- Made in Elkhart, Indiana, USA.
- Power Input
- 120 VAC 10%, 50 ~ 400 Hz.
- Internal taps also for 100 V, 200 and 220 V (all 10%).
- NE2H neon pilot light with 27k dropping resistor.
Condition: For Parts or Not Working
This used power amplifier powers on and both channels output sound but doesn't appear to amplify anything by a significant amount. Both channels output the same level. Different inputs tested and all the same results. Based on this, we are selling it in "as-is" condition. Please view our photo set and contact us if you have any questions.