Cisco

Cisco WS-C2948G Catalyst 48-Port 10/100 Layer 2 Switch 2x 1000BaseX GBIC

(No reviews yet) Write a Review
SKU:
20744
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
20.00 LBS
Shipping:
Calculated at Checkout
  • Cisco WS-C2948G Catalyst 2948G 48-port 10/100 rackmount switch — front panel view showing all 48 RJ-45 ports and 2 GBIC uplink slots
  • Cisco Catalyst 2948G switch — rear panel view showing 6 cooling fans, IEC power inlet, and RPS connector area
  • Cisco Systems WS-C2948G model number label on bottom of unit with FCC and ICES-003 compliance markings
  • Cisco Catalyst 2948G front panel close-up showing 10/100/1000 Ethernet ports, status LED, and Cisco Systems logo
  • Cisco Catalyst 2948G front panel right side showing ports 44-50, CONSOLE and 10BT MGT ports, 2 GBIC module slots (ports 49-50), status LEDs, and serial number label FOX03270366
  • Cisco Catalyst 2948G power supply label showing 100-240V, 50-60Hz, 2.5-1.3A, 250W rating with IEC inlet and two cooling fans
  • Cisco Catalyst 2948G rear panel detail showing RPS connector panel with caution label and two exhaust fans
$60.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Cisco WS-C2948G Catalyst 48-Port 10/100 Layer 2 Switch 2x 1000BaseX GBIC

The Cisco Catalyst WS-C2948G is a fixed-configuration, 1U rackmount Layer 2 Ethernet switch designed for wiring closet and access-layer deployments. It provides 48 dedicated 10/100 Mbps Fast Ethernet ports for end-device connectivity along with two 1000BaseX GBIC uplink ports for high-speed backbone connections to the distribution or core layer.

Specifications & What's Included

  • Model: Cisco WS-C2948G (Catalyst 2948G)
  • 48 x 10/100 Mbps Fast Ethernet ports (RJ-45)
  • 2 x 1000BaseX Gigabit Ethernet uplink ports (GBIC — ports 49 & 50)
  • Switch fabric: 24 Gbps non-blocking
  • Switching: Layer 2
  • Management: Console port (RJ-45), dedicated 10BT management port
  • Software: Cisco Catalyst System Software (shared codebase with Catalyst 6500 and 4500 series)
  • Management platform: CiscoWorks2000 compatible
  • Redundant Power Supply (RPS) connector on rear panel
  • Cooling: Multiple internal fans, rear exhaust
  • Power input: 100–240V AC, 50–60Hz, 2.5–1.3A, 250W
  • Form factor: 1U rackmount
  • Certifications: FCC Class A, Canadian ICES-003, CE, VCCI
  • Switch only — no GBIC modules, cables, or rack hardware included

Applications

The Catalyst 2948G is a wiring closet and access-layer switch from Cisco's late-1990s/early-2000s Catalyst fixed-configuration line. In enterprise campus networks of that era, switches like the 2948G were deployed at the access layer to aggregate workstations, IP phones, and printers and uplink them via GBIC to a distribution-layer switch such as a Catalyst 4500 or 6500. The shared Catalyst System Software codebase meant it participated fully in features like VLANs, Spanning Tree Protocol (STP), and SNMP-based management through CiscoWorks2000, making it straightforward to integrate into an existing Cisco infrastructure. Today the WS-C2948G is most commonly found in legacy network maintenance, lab environments, Cisco certification (CCNA/CCNP) study labs, and low-traffic secondary network segments where 10/100 access-layer switching remains adequate.

Condition: Used
This Cisco WS-C2948G Catalyst 2948G 48-Port 10/100 Layer 2 Switch has been inspected and appears to be in good used condition. The unit shows normal wear consistent with prior rack deployment — the chassis and front panel are intact with no significant damage visible. All 48 RJ-45 ports and both GBIC uplink slots appear undamaged. The rear fans, power inlet, and RPS connector area are all present and show no obvious physical issues. It was pulled from a working network environment where it was previously in service and has not been bench-tested at our facility. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Cisco
Model:
WS-C2948G
MPN:
WS-C2948G
Type:
Managed Layer 2 Ethernet Switch
SKU:
20744
Series:
Cisco Catalyst 2948G
Number of Ports:
48 x 10/100 + 2 x 1000BaseX GBIC
Port Speed:
10/100 Mbps (RJ-45); 1000 Mbps (GBIC uplinks)
Uplink Ports:
2 x 1000BaseX GBIC (ports 49-50)
Switch Fabric:
24 Gbps non-blocking
Management Type:
Managed
Management Interface:
Console (RJ-45), 10BT MGT port
Layer:
Layer 2
Form Factor:
1U Rackmount
Power Requirements:
100-240V AC, 50-60Hz, 2.5-1.3A, 250W
Redundant Power Supply:
RPS Connector supported
Cooling:
Internal fans (rear exhaust)
Certifications:
FCC Class A, ICES-003, CE, VCCI
Seller Notes:
Switch only — no cables, GBIC modules, or rack hardware included.
Country/Region of Manufacture:
United States
Condition Notes:
This Cisco WS-C2948G Catalyst 2948G 48-Port 10/100 Switch is in good used condition with normal wear. Pulled from a working network environment; not bench-tested at our facility. Chassis, ports, and fans appear undamaged.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose