Wide urethane-steel belt delivers excellent thrust without stretch
Total stroke length (excluding the carrier platforms themselves): 87
Features TWO carrier platforms, ONE master/drive and ONE slave/passive, both measuring 6.25 x 3.75
Actuator speeds up to 200 in/sec
Load carrying capabilities up to 8032 lbs (35.7 kN) for EACH carrier. Total theoretic load may reach up to 16064 lbs for the entire system
Apex Dynamics High Precision Gearbox Specifications:
Model: AN034B-P2
Ratio: 010:1
Backlash: Less than or equal to 4 Arc Minutes
Applied Motion Products 2 Phase Step Motor Specifications:
Model: HT34-488D
1.8 Deg/Step
3.2V
4.3A
Tolomatic Linear Drives are capable of accommodating heavy loads with high bending movements and consistent operation. The B3W linear belt drive incorporates an enclosed recirculating bearing system eliminating the need for external load guidance and delivers a 100% duty cycle with an extended service life.
We do not have the controller / drivers to test the motors out electrically, but manually turning the drive shaft creates smooth, clean motion out if the master/drive carrier platform along the full travel length of the actuator
Taiyo XY-5015 Linear Actuator 255mm Travel 200VAC 400W *NO COVER* Unit is missing is top cover, please see photos. 255 mm of Travel Platform area: 145 mm x 135 mm Overall dimensions: 635 mm...
HDPE Spinning Chamber with Miniark Drive Controller and Norgren Linear Actuator ​Dimensions (not including lid volume): 15.5 Wide x 15.5 Deep x 5 Tall Miniarik C1XP01-115AC-A Driver ...
