Call Us Today Toll Free 1 (888) 488-6550 or 1 (805) 648-3300 Our Business Hours are from 8AM to 5PM M-F Pacific Standard Time - Ventura California

Nanosolar NanoCell 2.6 Watt Flexible CIGS Solar Cell Lot of 10 total 26 Watts

Nanosolar NanoCell 26 Watts 2.6 Watt Lightweight Flexible CIGS Solar Cell Lot of 10
SKU: 47026
Sign up for price alert
Only 1783 left

Availability: In stock


Same or next day processing on most orders.


Call us now for more info about our products.

back arrow

Money back guarantee on purchased items.


If you don't see what you need, feel free to CONTACT US.


Nanosolar Nanocell 2.6 Watt Lightweight Flexible CIGS Solar Cell Lot of 10. This is for a lot of 10 solar cells that total 26 watts. Each individual solar cell has a maximum electrical output (mppt) of 0.45 volts at 5.8 amps which calculates to 2.6 watts each. These CIGS solar cells took over 70 steps to produce on multiple machines with hundreds of workers in a 200,000 sf factory in San Jose California. They are made on thin flexible aluminum sheets which make them difficult to weld or solder even with Alumiflux solder flux paste. We have had success using double sided conductive tape to connect. You can see the video of the output 10 cells connected with the tape have produced in partial sun conditions. We find these cells even produce energy when placed under a light bulb.
Download Specifications Sheet
  • Nanosolar Nanocell Preliminary Sell Spec Sheet
    Manufacturers Specifications
  • Raw Solar Cell Uncoated
  • Rated Power: 2.6 Watts per cell
  • Vmpp (V) 0.45
  • Impp (A) 5.8
  • Voc (V) 0.61
  • Isc (A) 6.7
  • Operating Module Temperature -40 to +85C
  • Length: 165mm (6.5 inches)
  • Width: 135mm (5.3 inches)
  • Height: 0.4mm (0.02 inches)
  • Weight: 18.5g per cell
  • Raw Solar Cell Uncoated
  • Lightweight Aluminum Structure CIGS Solar Cells which are Semi-Flexible
    These raw flexible solar cells are extremely rare and have never been offered for sale to the public before. These came from the last experimental production runs at the Nanosolar Facility in California. The facility and company was liquidated during September and October of 2013. We can ship these in bin racks of 1,000 cells and cartons of 6,000 cells if you would like larger quantities.
    These raw solar cells are very robust for CIGS, however, will degrade if not encapsulated in weather tight enclosure. Its interesting for experiment we have left a few exposed and un-encapsulated for 2 years and have found minimal degradation.
    The CIGS solar cells are made of aluminum and to connect them we have used double sided conductive acrylic adhesive tape made by 3M / Tape Case (1182). Nanosolar used ultrasonic metal spot welders to connect the cells in production We have found a spot welder does connect them but if the settings are not just right you will blow a hole through them or the connection is weak. We believe a combination of the 3M 1182 tape and spot weld may be the best choice for DIY applications.
    We have had many questions regarding cutting these cells. When these cells are cut they retain their .45 volts but the amps are reduced somewhat proportionally. You cannot use regular scissors or tin snips as these are made of 2 thin sheets of aluminum separated by energy producing compounds. If the top (negative) and bottom (positive) aluminum sheets touch it shorts the cell. We have successfully cut these cells with a water-jet cutter as well as a sharp bench shear set at 45 degree angle. It is possible to cut and then sand the cut edges back until the two sheets are separated but that is a tedious task and not recommended. Also we have noticed the cut cells are not as robust as the uncut cells even when accounting for the size differences of the cells.
    The large area of metal (nickel coated aluminum) back is the positive output of the cell. The thin strip of un-coated aluminum on the down-facing side of the front is the negative output of the cell. Let me know if you have any questions about these cells. These came from the manufacturing floor of Nanosolar in San Jose and are being stored in air tight bags with desiccant. Each cell was tested for proper output by Nanosolar before being packaged and we have found these are very robust cells. These solar cells can be previewed at our facility in Ventura, California.
  • YouTube Video

    Additional Info
    Brand Nanosolar
    MPN NanoCell
    Model CIGS
    Product Name 2.6 Watt Lightweight Flexible CIGS Solar Cell Lot of 10
    Condition New
    Condition Description These Aluminum Solar Cells are New and Unused. They are stored in air tight sealed cartons with desiccant to prolong shelf life. They are in excellent new condition
    Weight 0.6000
    Write Your Own Review
    You're reviewing: Nanosolar NanoCell 2.6 Watt Flexible CIGS Solar Cell Lot of 10 total 26 Watts